#1 24X7 Plumbing and Heating Contractors West River 20778 MD (844-507-4350)

Posted by in Heating Contractors, on November 23, 2017

Plumbing Repair Services in West River 20778

24X7 Operation & FREE Consultation Click to Call

Plumbing and Heating Contractors West River 20778 MD: Got a broken water line? Here is how you can fix it

The water pipe does not give a warning before breaking. You only get to see the results after the deed is done. The sudden gush of water is the obvious indication of a broken water line. When a water line inside the home gets damaged, it is still easy to fix because it is visible. But in case the underground water line breaks, you need to dig deep into the ground and fix it. This means more hassle and expense. You can go through the tips given below to reduce the expenditure and learn how to fix broken water lines yourself.

Some common reasons for the breaking of water lines

Usually, fittings and connections in the water pipe are the first to get affected and develop cracks which leak and eventually erode the PVC pipe to such an extent that it breaks. The underground water lines located under the foundation of the home or between the street and the house break due to deterioration with the passage of time or due to pressure. In some cases, these pipes burst due to freezing. Water lines also break during earthquakes. When you hear a rumbling or hissing sound coming from the main water line even when you are not using any of the faucets, it means that the main water line has developed a crack. Also, when the pressure of water is lower than usual, it indicates the loss of water due to a leak in the pipe. In such cases, it is very important that you know how to fix broken water lines. Or call us today and we can help you find the best Plumbing Emergency Firms in West River 20778 MD.

Things that you need to keep in mind before repairing the pipe

It is important to evaluate the condition of the pipe before going for a repair. If the pipe is very old, it is better to replace it rather than trying to repair it. In case the pipe has been repaired before, then too replacement is a good choice. If the pipe has developed a crack for the first time, you should consider removing the whole pipe rather than replacing only the damaged part. The reason is that a repaired pipe is more likely to develop cracks again. So instead of spending money twice on repairing, it is wiser to spend it once and install a new pipe which will last longer. Pipe materials like PVC can be easily repaired but lead based pipes become brittle and corroded with time and hence, need to be replaced.

Plumbing and Heating Contractors West River 20778 MD

How to fix broken water lines?

Here are some tips which might prove to be useful in case you want to learn how to fix broken water lines.

  • Locating the point of the leak

The first thing is to find the crack. The cracks in the pipes located inside the house are evident but the underground pipes are not visible. When these pipes break, the accumulation of water above the ground or the wet mud gives an indication of the leak. If the pipe located behind the wall of the home breaks, you need to put your ear to the wall and locate the leak. When your pump is running and the water meter is moving without any of your faucets being on, it means there is a leak somewhere. That is why professionals and Plumbing Contractors West River 20778 MD keep an eye on that.

  • Digging under the ground

This advice is given by the top rated Plumbing Repair Services in West River 20778 MD. The pipes located underground can be repaired only after you dig them out. This is something which you cannot do yourself. You should find a reputable water main contractor to identify the problem and get it fixed. You also need to call your utility company to mark underground pipes and wires so that they do not get damaged when you dig for the water line. When the water line breaks outside the house, the pipe is dug out from the yard to the house. Then it is cut and removed and replaced with a new pipe. The new pipe should be connected with the existing one and all the indoor and outdoor joints should be sealed. You should always check for leaks after the repair work is over. There is also a no-dig repair method in which a resin pipe lining is put in to the pipe till the place of the break. It is then inflated with air so that it touches the wall of the pipe and hardens to seal the pipe. This is called the Cured in Place Pipe method. A minor break can be repaired by putting a sleeve around the pipe or by replacing only that small portion of the pipe.

Plumbing and Heating Contractors West River Maryland

  • Fixing the visible pipes yourself

When you see a sudden gush of water from any pipe of your house, you should first shut-off the main valve. A small leak can be closed by placing a piece of rubber or any other sealing agent available on the leak. You can then put a C-clamp on it to tighten the seal. A sleeve clamp can also be fixed using a screwdriver. It stops both small and large leaks. These plumbing repair items like hose clamps, duct tapes, rubber and C-clamps are very cheap and can be stored at home in anticipation of such problems. If you want to replace the pipe yourself, then you first need to identify which kind of pipe you have. Once that is done, you need to cut the pipe from the place where it has cracked. The next step is to attach a new pipe to the existing one with the help of fittings and clamps. Finally, the repaired pipe is connected to the faucet and it is ready to be used. Or you can give us a call and we will connect you to the best Plumbing Companies in West River 20778 MD.

If you follow some of these tips, you can save a lot of money and effort. You can fix the minor leaks yourself, but in case of major leaks or underground damage, it is better to take the help of a professional and licensed plumber. These are some of the things that you need to keep in mind when you are trying to repair a broken pipe line. Now you have all enough information to target the best Plumbing and Heating Contractors West River 20778 MD.

References

• http://www.instructables.com/id/Water-Line-Leaks-Fix-It-Yourself-Heres-How/

• http://www.oneprojectcloser.com/how-to-repair-underground-water-pipe/

Related Posts:

#1 24X7 Plumbing and Heating Contractors Woodbine 21797 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Woodsboro 21798 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Salisbury 21801 MD (844-507-4350)

Plumbing and Heating Contractors West River 20778 MD

Tape is only meant for pipe threads, don’t use tape on compressors or other connections

What to look for in your next contractor – Do they guarantee their work? It is an industry standard to verify labor and parts. Be wary of any plumber that does not offer any type of guarantee.

Salt and Baking Soda: Mix 1/2 cup of table salt with 1/2 cup of baking soda and pour down the blocked drain. Leave it for 10-20 minutes, then pour boiling water down. The salt, baking soda, and boiling water will produce a chemical reaction that should dissolve some of the nastiest blockages. (See also: 27 Uses for Baking Soda)

Know Where the Shutoff Valves Are: When you do experience problems, like an overflowing toilet or a pipe that has exploded, you need to shut off the water immediately to prevent further damage. Know where the shutoff valves are so you can prevent the problem from getting worse.

Wrap pipes in adhesive-backed felt. Running hot water can cause copper pipes to expand and grind against pipe hangers and joists. So pick up some adhesive-backed felt at the hardware store and cut it into strips. Then remove each hanger and wrap the pipe before refastening the hanger.

Get your self professional tubing cutters, reciprocating-saw blades, hacksaw blades and a plastic pipe saw. Do it right or expect trouble down the road.

To determine the size of sump pump you need, you must know how much water you’ll need to be pumped, how high the water will be pumped and the length and size of pipe.

Submersible sump pumps are designed to sit in the base of the sump basin, below water level.

Pouring chemicals down your drain will corrode the pipes.

Use food coloring, to test for a leaky toilet. Place a few drops in your toilets water tank. Wait a few hours, then check the bowl to see if there is any color there. If there is, it’s an indicator that you have a leaky flapper

Toilet Care 101. The sooner you catch toilet leaks and other problems, the better. A toilet leak can seep into your subflooring, eventually weakening structural beams and leading to collapse! Check your toilet for damage by scouring the exterior for cracks. Also look for water on the floor, seeping through the caulk around the bottom. This indicates that the wax seal on the bottom of the toilet is broken and must be replaced. Also check for a loose handle, or one that must be held down. Such plumbing repair projects are generally inexpensive, and they can save you a bundle on water costs over the long term.

Save Money on Bathroom Modelling – Don’t overspend on wall prep. If your walls are in such rough shape that it would take a painting contractor days of filling and sanding to make them ready for the roller, consider using materials such as Texturglas, from Deerfield Beach, Florida— based company Roos International. A breathable, nontoxic wall covering made of fine glass filaments, Texturglas has a similar look and feel to the fiberglass matting used in auto–body work. It’s available in a variety of surface patterns, takes paint readily, and is designed to be installed right on top of existing surfaces, adding strength while covering up dings.

Ways to Unclog Drains: Use your vacuum cleaner- There are wet and dry vacuum cleaners available in the market which can be used to mop up liquids. You can try out the idea of using the vacuum cleaner to pull out the clog. For this, you have to keep the cleaner at the highest setting and place it over the drain. You need to cover the vent of the cleaner so that the waste coming out does not spread and create a mess. The vacuum effect can help to suck out whatever is stuck in the drain pipe and unclog the drain.

Using two wrenches at once turning in opposite directions is called “backing off” and allows the wrench to absorb the stress and not the plumbing.

If your kitchen sink is clogged by grease, you can remove the clog by pouring ¼ cup of dish soap down the drain, wait about 20 minutes and then pour roughly a quart of boiling water in the drain

The most common causes of dripping faucets, are worn washers, bad internal seats or worn/faulty faucet cartridges

Control indoor moisture to prevent mold: The key to stopping mold and mildew is to control dampness. The worst infestations usually occur in damp crawlspaces, in attics and walls where water has leaked in from the outside, and in basements with poor foundation drainage. Stopping leaks, ensuring good ventilation in attics, keeping crawlspaces dry and routing water away from the foundation are the best defenses.

Tips for installing and repairing a gas line: Make use of epoxy compounds when your gas line has a leak- Epoxy compounds can quickly create a rigid and strong bond and so they can seal the leaks in the gas line easily. This is a temporary repair solution which can save your time and expense and can last for a long time. Epoxy compounds contain resin and a hardener which are suitable for cast iron pipes. They can be poured over the leaks. The bond produced by the epoxy compounds is very effective in blocking gas leaks till you can get the pipe replaced.

Ways to Unclog Drains: Pour boiling water down the drain- This is a quick fix for the problem of clogged drains. Be it bathroom drains or kitchen sink drains, you can pour a significant quantity of boiling water into the drain pipe. This process should be repeated twice or thrice at small intervals. The boiling water can help to dissolve the settled grime along the sides of the drain pipe and break it into small parts so that the waste can flow down with the water and get drained, leaving the pipe clean.

Ways to Prevent Washing Machine Leaks: Tighten the hose connections- Hose connections provide water to the hoses which in turn supplies hot and cold water to the washing machine. The moment the spin cycle starts, a lot of pressure is created because water gets filled up in the machine. Not only the hoses but the connections too have to withstand this pressure. It can so happen that with regular use, these connections may become loose and start leaking. To prevent this, you need to check your hose connections from time to time and tighten them up if they appear to be loose.

Examine your faucets for leaks. Look into the knobs as well as the faucet itself. Numerous gallons of water each day can be wasted due to leaks and that’s not good if you’re paying your water bill. By stopping a leak now, you can save yourself lots of money. Leaks can grow with time too, so avoid a disaster and look all faucets for leaks!

Plumbing Repair Services

We connect you to the best Plumbing Emergency Firms in your city!
3788 Durham Road
West River, MD 20778

Anne Arundel, Maryland (MD)

Telephone: 844-507-4350