#1 24X7 Plumbing and Heating Contractors Upper Marlboro 20774 MD (844-456-4168)

Posted by in Heating Contractors, on September 28, 2017

Plumbing Repair Services in Upper Marlboro 20774

24X7 Operation & FREE Consultation Click to Call

Plumbing and Heating Contractors Upper Marlboro 20774 MD: Got a broken water line? Here is how you can fix it

The water pipe does not give a warning before breaking. You only get to see the results after the deed is done. The sudden gush of water is the obvious indication of a broken water line. When a water line inside the home gets damaged, it is still easy to fix because it is visible. But in case the underground water line breaks, you need to dig deep into the ground and fix it. This means more hassle and expense. You can go through the tips given below to reduce the expenditure and learn how to fix broken water lines yourself.

Some common reasons for the breaking of water lines

Usually, fittings and connections in the water pipe are the first to get affected and develop cracks which leak and eventually erode the PVC pipe to such an extent that it breaks. The underground water lines located under the foundation of the home or between the street and the house break due to deterioration with the passage of time or due to pressure. In some cases, these pipes burst due to freezing. Water lines also break during earthquakes. When you hear a rumbling or hissing sound coming from the main water line even when you are not using any of the faucets, it means that the main water line has developed a crack. Also, when the pressure of water is lower than usual, it indicates the loss of water due to a leak in the pipe. In such cases, it is very important that you know how to fix broken water lines. Or call us today and we can help you find the best Plumbing Emergency Firms in Upper Marlboro 20774 MD.

Things that you need to keep in mind before repairing the pipe

It is important to evaluate the condition of the pipe before going for a repair. If the pipe is very old, it is better to replace it rather than trying to repair it. In case the pipe has been repaired before, then too replacement is a good choice. If the pipe has developed a crack for the first time, you should consider removing the whole pipe rather than replacing only the damaged part. The reason is that a repaired pipe is more likely to develop cracks again. So instead of spending money twice on repairing, it is wiser to spend it once and install a new pipe which will last longer. Pipe materials like PVC can be easily repaired but lead based pipes become brittle and corroded with time and hence, need to be replaced.

Plumbing and Heating Contractors Upper Marlboro 20774 MD

How to fix broken water lines?

Here are some tips which might prove to be useful in case you want to learn how to fix broken water lines.

  • Locating the point of the leak

The first thing is to find the crack. The cracks in the pipes located inside the house are evident but the underground pipes are not visible. When these pipes break, the accumulation of water above the ground or the wet mud gives an indication of the leak. If the pipe located behind the wall of the home breaks, you need to put your ear to the wall and locate the leak. When your pump is running and the water meter is moving without any of your faucets being on, it means there is a leak somewhere. That is why professionals and Plumbing Contractors Upper Marlboro 20774 MD keep an eye on that.

  • Digging under the ground

This advice is given by the top rated Plumbing Repair Services in Upper Marlboro 20774 MD. The pipes located underground can be repaired only after you dig them out. This is something which you cannot do yourself. You should find a reputable water main contractor to identify the problem and get it fixed. You also need to call your utility company to mark underground pipes and wires so that they do not get damaged when you dig for the water line. When the water line breaks outside the house, the pipe is dug out from the yard to the house. Then it is cut and removed and replaced with a new pipe. The new pipe should be connected with the existing one and all the indoor and outdoor joints should be sealed. You should always check for leaks after the repair work is over. There is also a no-dig repair method in which a resin pipe lining is put in to the pipe till the place of the break. It is then inflated with air so that it touches the wall of the pipe and hardens to seal the pipe. This is called the Cured in Place Pipe method. A minor break can be repaired by putting a sleeve around the pipe or by replacing only that small portion of the pipe.

Plumbing and Heating Contractors Upper Marlboro Maryland

  • Fixing the visible pipes yourself

When you see a sudden gush of water from any pipe of your house, you should first shut-off the main valve. A small leak can be closed by placing a piece of rubber or any other sealing agent available on the leak. You can then put a C-clamp on it to tighten the seal. A sleeve clamp can also be fixed using a screwdriver. It stops both small and large leaks. These plumbing repair items like hose clamps, duct tapes, rubber and C-clamps are very cheap and can be stored at home in anticipation of such problems. If you want to replace the pipe yourself, then you first need to identify which kind of pipe you have. Once that is done, you need to cut the pipe from the place where it has cracked. The next step is to attach a new pipe to the existing one with the help of fittings and clamps. Finally, the repaired pipe is connected to the faucet and it is ready to be used. Or you can give us a call and we will connect you to the best Plumbing Companies in Upper Marlboro 20774 MD.

If you follow some of these tips, you can save a lot of money and effort. You can fix the minor leaks yourself, but in case of major leaks or underground damage, it is better to take the help of a professional and licensed plumber. These are some of the things that you need to keep in mind when you are trying to repair a broken pipe line. Now you have all enough information to target the best Plumbing and Heating Contractors Upper Marlboro 20774 MD.

References

• http://www.instructables.com/id/Water-Line-Leaks-Fix-It-Yourself-Heres-How/

• http://www.oneprojectcloser.com/how-to-repair-underground-water-pipe/

Related Posts:

#1 24X7 Plumbing and Heating Contractors Poolesville 20837 MD (844-456-4168)
#1 24X7 Plumbing and Heating Contractors Brookeville 20833 MD (844-456-4168)
#1 24X7 Plumbing and Heating Contractors Barnesville 20838 MD (844-456-4168)

Plumbing and Heating Contractors Upper Marlboro 20774 MD

Tips for maintaining your bathroom plumbing: Prevent pipes from freezing in winters- Frozen water pipes are a common phenomenon during winter. If a pipe freezes up, it can burst in a short time if it is not thawed. However, you can prevent the pipes from freezing with the help of pipe insulation techniques. There are insulating pipe sleeves which are available that protect the pipe from cold temperatures. You can also seal doors and windows tightly to avoid cold air from coming into the room. Maintaining the house temperature at an adequate level can prevent pipes from freezing. You should make use of all the faucets so that water is not allowed to freeze. Such preventive measures are much better than spending on repairing or replacement of a burst pipe.

Tips for maintaining your bathroom plumbing: Repair leaks in faucets and showerheads- Leaking faucets is a problem that many people face frequently. This can happen if the washer breaks due to regular use of the faucet. There can be problems with the shower faucet too which can lead to leaks from the shower head. Dripping faucets and showerheads are very annoying and cause a lot of water damage if they are not repaired quickly. You should call a plumber to check the source of the leaks and get it repaired immediately to solve the problem.

Tips for Fixing Low Water Pressure in Your Home: Take a look at the water heater- Low water pressure can occur in hot water pipes if there is a problem with the water heater. There may be clogging due to sediment accumulation in the heater or the water supply line. The pipes supplying water to the heater may be too narrow. There may be small leaks in the hot water tank or valves. All these reasons can cause the water pressure to become low. It is necessary to eliminate these obstructions in order to make the water flow quickly and with a better force.

To stop an over flowing toilet locate the valve behind your toilet and turn it off immediately

Tips for installing and repairing a gas line: Clamps can be used to hold broken the broken pipe- When a gas line pipe breaks suddenly; you need to take immediate action to stop the leak. Pipe clamps are very sturdy and strong and can be used for this purpose. They can be used to cover cracks or leaks in the pipe line. They help in holding the broken pieces of the pipe together to bring the gas line back to working condition so that you can make use of it till you get a chance to get it repaired or replaced.

Ways to Prevent Washing Machine Leaks: Keep the washer lint-free- It does not seem likely that something as minute as lint can cause trouble. However, lint has a tendency to accumulate over time in the drain pipe and clog it. You need to take measures to prevent lint accumulation so that water can drain easily from the machine. There are mesh lint catchers available which do not cost much. You can attach them to the end of the drain pipe. These can help in removing lint from the pipe. You have to change these lint catchers every month to keep the pipe line-free.

Installing a special pressure pump will help raise pressure if all other repair options fail. The pump fills with water and then fills partly with air to keep an even pressure in your water lines. If you believe the problem is something serious that you have not been able to identify, you should enlist the services of a professional plumber.

WaterSense labeled toilets meet or exceed plumbing standards

Tips for repairing burst pipes: Switch off electricity supply to the room- The main water supply pipes are usually present in the attic or basement. When a pipe bursts, you should not only stop the water supply but also the electricity supply to that room. This precaution is necessary because you can get electrocuted by wading through the flood of water if any electric wire becomes loose or if the water comes in touch with an electric socket. Water and electricity is a fatal combination which can prove to be life-threatening. So you should be careful about it.

Upgrade washing machine hoses: Old, brittle or leaky washing machine hoses are among the most frequent causes of water loss for homeowners. Replace yours regularly to avoid a mighty mess and expensive damage.

Ways to Prevent Washing Machine Leaks: Take a look at the door seals- It is not always the water hose in the washing machine which can cause leaking. If the rubber gaskets around the doors of front-loading machines are dirty, mold can start developing and can cause cracks in the seal. Small cracks can stretch into big ones within a short time and cause water to leak from the door of the machine. You should check the door seal for the presence of mold or mildew and should eradicate it immediately if you spot this problem.

During cold spells make sure to keep your faucets trickling. This will prevent the pipes from freezing over.

Save Money on Bathroom Modelling – Make decisions early. Start prowling the aisles at the hardware store or home center way before the wrecking crew shows up. Get a good feeling for what you want in fixtures and appliances and what they cost. If you aren’t absolutely specific up front about what you want, you’ll have to rely on your contractor’s estimate, called an allowance, and his notion of what is acceptable may be quite different from yours. “Ninety–eight percent of the time, allowances are too low,” says Tom Silva. For instance, you may have had a glass–tile backsplash in mind, but your contractor’s bid was for ceramic.

Save Money on Bathroom Modelling – Make sweat equity count. Unless you’ve got loads of time (and expertise) to spend on your project, the best way to add sweat equity is up front, by handling your own demolition, or at the back end, by doing some of the finish work yourself. “If you want to save money, dig in and start helping out,” says Tom Silva. “You can insulate, you can paint, you can sand.” Or better still, he says, help with cleanup every day. “Instead of paying someone to pick up sawdust off the floor, put your money into the time it takes to trim the window properly,” he advises.

Vinegar: Tried and true method: Remove as much liquid as you can. Toss in 1 cup of baking soda, then pour down a cup of household vinegar, plug with the stopper then let sit for half an hour. After about 30 minutes, unplug and pour a kettle full of hot water on top. See this page from thegoodhuman.com and this this one from treehugger.com for more details. This is the method I’ve grown up with and it works even if there’s still liquid backed up (although it works faster without water). Just double the baking soda & vinegar amount, give it about an hour and things have fully emptied, dump more fresh batches of boiling water 2 or 3 times to completely clear out the gunk.

Use granite remnants for counters. Granite shops often have small bits of granite left over from bigger jobs and will sell you enough for a bathroom vanity counter at a discount. To find out what’s available, call your local shops first then drop by to see the granite and negotiate the price.

How to deal with water damage? Disconnect the power supply- Water and electricity is a lethal combination which can be life-threatening. When your house is flooded with water, you should turn off the power supply to the rooms which are affected before starting the cleaning process. It is a precaution which must be taken without fail because you need to remove electric appliances and gadgets and deal with loose wires. In case the electricity supply is not switched off, you can get an electric shock. In extreme cases it can lead to death. So you should be careful.

Tips for maintaining your bathroom plumbing: Change the pipes which are very old- Pipes that have been around for a long time are vulnerable to cracks and leaks. If the pipes in your home are old, you should seriously think about getting them replaced because sooner or later they will develop leaks which will cause a lot of water damage. Instead of spending on pipe repairs or water damage repairs in the future, it is better to spend on a new plumbing system now. You do not have to think about plumbing problems for a long time if you get the old pipes replaced.

Plumbing Repair Services

We connect you to the best Plumbing Emergency Firms in your city!
5943 Clinton Street
Upper Marlboro, MD 20774

Prince Georges, Maryland (MD)

Telephone: 844-456-4168