#1 24X7 Plumbing and Heating Contractors Upper Marlboro 20773 MD (844-507-4350)

Posted by in Heating Contractors, on November 29, 2017

Plumbing Repair Services in Upper Marlboro 20773

24X7 Operation & FREE Consultation Click to Call

Plumbing and Heating Contractors Upper Marlboro 20773 MD: Got a broken water line? Here is how you can fix it

The water pipe does not give a warning before breaking. You only get to see the results after the deed is done. The sudden gush of water is the obvious indication of a broken water line. When a water line inside the home gets damaged, it is still easy to fix because it is visible. But in case the underground water line breaks, you need to dig deep into the ground and fix it. This means more hassle and expense. You can go through the tips given below to reduce the expenditure and learn how to fix broken water lines yourself.

Some common reasons for the breaking of water lines

Usually, fittings and connections in the water pipe are the first to get affected and develop cracks which leak and eventually erode the PVC pipe to such an extent that it breaks. The underground water lines located under the foundation of the home or between the street and the house break due to deterioration with the passage of time or due to pressure. In some cases, these pipes burst due to freezing. Water lines also break during earthquakes. When you hear a rumbling or hissing sound coming from the main water line even when you are not using any of the faucets, it means that the main water line has developed a crack. Also, when the pressure of water is lower than usual, it indicates the loss of water due to a leak in the pipe. In such cases, it is very important that you know how to fix broken water lines. Or call us today and we can help you find the best Plumbing Emergency Firms in Upper Marlboro 20773 MD.

Things that you need to keep in mind before repairing the pipe

It is important to evaluate the condition of the pipe before going for a repair. If the pipe is very old, it is better to replace it rather than trying to repair it. In case the pipe has been repaired before, then too replacement is a good choice. If the pipe has developed a crack for the first time, you should consider removing the whole pipe rather than replacing only the damaged part. The reason is that a repaired pipe is more likely to develop cracks again. So instead of spending money twice on repairing, it is wiser to spend it once and install a new pipe which will last longer. Pipe materials like PVC can be easily repaired but lead based pipes become brittle and corroded with time and hence, need to be replaced.

Plumbing and Heating Contractors Upper Marlboro 20773 MD

How to fix broken water lines?

Here are some tips which might prove to be useful in case you want to learn how to fix broken water lines.

  • Locating the point of the leak

The first thing is to find the crack. The cracks in the pipes located inside the house are evident but the underground pipes are not visible. When these pipes break, the accumulation of water above the ground or the wet mud gives an indication of the leak. If the pipe located behind the wall of the home breaks, you need to put your ear to the wall and locate the leak. When your pump is running and the water meter is moving without any of your faucets being on, it means there is a leak somewhere. That is why professionals and Plumbing Contractors Upper Marlboro 20773 MD keep an eye on that.

  • Digging under the ground

This advice is given by the top rated Plumbing Repair Services in Upper Marlboro 20773 MD. The pipes located underground can be repaired only after you dig them out. This is something which you cannot do yourself. You should find a reputable water main contractor to identify the problem and get it fixed. You also need to call your utility company to mark underground pipes and wires so that they do not get damaged when you dig for the water line. When the water line breaks outside the house, the pipe is dug out from the yard to the house. Then it is cut and removed and replaced with a new pipe. The new pipe should be connected with the existing one and all the indoor and outdoor joints should be sealed. You should always check for leaks after the repair work is over. There is also a no-dig repair method in which a resin pipe lining is put in to the pipe till the place of the break. It is then inflated with air so that it touches the wall of the pipe and hardens to seal the pipe. This is called the Cured in Place Pipe method. A minor break can be repaired by putting a sleeve around the pipe or by replacing only that small portion of the pipe.

Plumbing and Heating Contractors Upper Marlboro Maryland

  • Fixing the visible pipes yourself

When you see a sudden gush of water from any pipe of your house, you should first shut-off the main valve. A small leak can be closed by placing a piece of rubber or any other sealing agent available on the leak. You can then put a C-clamp on it to tighten the seal. A sleeve clamp can also be fixed using a screwdriver. It stops both small and large leaks. These plumbing repair items like hose clamps, duct tapes, rubber and C-clamps are very cheap and can be stored at home in anticipation of such problems. If you want to replace the pipe yourself, then you first need to identify which kind of pipe you have. Once that is done, you need to cut the pipe from the place where it has cracked. The next step is to attach a new pipe to the existing one with the help of fittings and clamps. Finally, the repaired pipe is connected to the faucet and it is ready to be used. Or you can give us a call and we will connect you to the best Plumbing Companies in Upper Marlboro 20773 MD.

If you follow some of these tips, you can save a lot of money and effort. You can fix the minor leaks yourself, but in case of major leaks or underground damage, it is better to take the help of a professional and licensed plumber. These are some of the things that you need to keep in mind when you are trying to repair a broken pipe line. Now you have all enough information to target the best Plumbing and Heating Contractors Upper Marlboro 20773 MD.

References

• http://www.instructables.com/id/Water-Line-Leaks-Fix-It-Yourself-Heres-How/

• http://www.oneprojectcloser.com/how-to-repair-underground-water-pipe/

Related Posts:

#1 24X7 Plumbing and Heating Contractors Goldsboro 21636 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Greensboro 21639 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Grasonville 21638 MD (844-507-4350)

Plumbing and Heating Contractors Upper Marlboro 20773 MD

Know what a bathroom remodel costs. Before you begin any project, it’s important to put your expectations into perspective when it comes to how much money you’re willing to invest. The size of your bathroom, the quality of materials you want to include and whether you’re planning to do some of the labor yourself all can affect the cost of a remodel. Here’s a look at estimated costs for a basic, mid- to upper-range and deluxe bathroom remodel.

Submersible sump pumps are designed to sit in the base of the sump basin, below water level.

Ways in Which You Can Prevent Water Damage: Keep your gutters and downspouts clean- Clogged gutters do not allow the water to drain. The excess water overflows and comes down the side of your house in a cascade. This can cause severe damage to the walls and foundation of your house. You also need to install your downspouts at least 5 to 10 feet away from your house so that there is no pooling of water near it. These gutters and downspouts should be cleaned regularly and specially before the rainy season so that the water gets drained easily.

During cold spells make sure to keep your faucets trickling. This will prevent the pipes from freezing over.

The Dreaded Clog: Clogs are the most common toilet problems. Several tools can help you clear a clogged drain. A force-cup plunger is more effective than the familiar standard type for clearing minor clogs. Insert the bulb into the drain, and pump forcefully. Slowly release the handle, letting a little water in so you can see whether the drain is clear. Repeat if necessary. For serious clogs, use a closet auger. Insert the end of the auger into the drain hole, and twist the handle as you push the rotor downward. Use caution not to scratch the bowl.

Clean-outs: You should also find out where the clean-outs are. This is really important.

Get your self professional tubing cutters, reciprocating-saw blades, hacksaw blades and a plastic pipe saw. Do it right or expect trouble down the road.

A cup plunger can be used for small drains like bath tubs, showers and lavatory sinks. Forced cup plungers have a funnel that can apply extra force down the drain, which is good for sinks or toilets.

Salt and Baking Soda: Mix 1/2 cup of table salt with 1/2 cup of baking soda and pour down the blocked drain. Leave it for 10-20 minutes, then pour boiling water down. The salt, baking soda, and boiling water will produce a chemical reaction that should dissolve some of the nastiest blockages. (See also: 27 Uses for Baking Soda)

For electric water heaters, install a timer that can automatically turn the hot water off at night and on in the morning. A simple timer can pay for itself in less than a year.

Tape is only meant for pipe threads, don’t use tape on compressors or other connections

Ways to choose your plumber – Pricing – The plumber will know what he or she needs to do and will be able to give an accurate estimate, barring of course, any other major problems. Make sure to get at least three estimates, and be wary of any estimate that is much lower than the others. It could mean the plumber is cutting corners or plans to use inferior parts.

Bathroom Design Tips – Curbless Shower with a Bench and Grab Bars – This doesn’t have to look as antiseptic as it sounds. Think in terms of a tiled shower area with recessed shelves at arm’s level to stop you from having to stoop down to the floor or reach up to a shower rack. Add a matching ceramic bench and grab bars that come in brushed nickel, chrome or bronze to match your faucet hardware. They will look more upscale than the white plastic hospital variety.

Buy a framed mirror or frame your existing mirror. That small change can quickly give your bathroom a more glamorous look. If your mirror is small, you may be able to buy a frame at a yard sale or thrift store. For a large mirror, use molding to build a frame.

Mirror Frame-Up: Dress up that builder-grade mirror with a fantastic frame, and at a fraction of the price of sourcing a huge hanging mirror. A frame will also hide any age-related wear, says Karen Gray Plaisted, a Warwick, N.Y.-based home stager and decorator. “I often tell clients to add a frame around their mirror to hide the flaking that can happen around the edges, and to give it a more updated look,” she says.

Tips for installing and repairing a gas line: Seal the seams properly if there is a leak in the pipe- In case the gas pipe line that you are using develops leaks; bubbles are visible near the seams. This is very common because there are so many attachments in the pipe which can become loose over time. You need to detach that particular section of the pipe and pour a mixture of water and dish detergent over it. This can act as a sealant and fix the various parts of the gas line together strongly. It is very important to plug leaks because a small leak can cause a big explosion and destruction.

Never put rice, pasta, bones, corn cobs or beans in your garbage disposal

Tips for installing and repairing a gas line: Always turn off the gas supply before installation or repair- This is a necessary step which should not be avoided. You should turn off the valve present beside the gas meter before removing the old pipe and replacing it with a new one and also while repairing the present one. In case the valve is open, gas can leak and can lead to a fatal disaster by causing a big fire. The valve should be perpendicular to the pipe when it is closed. There is no change in the gas meter when the valve is closed. You should check all this and then start the gas line work.

Using two wrenches at once turning in opposite directions is called “backing off” and allows the wrench to absorb the stress and not the plumbing.

Insulate your gas or oil hot-water storage tank and pipes, but be careful not to cover the water heater’s top, bottom, thermostat or burner compartment; when in doubt, get professional help.

Plumbing Repair Services

We connect you to the best Plumbing Emergency Firms in your city!
4619 Route 27
Upper Marlboro, MD 20773

Prince Georges, Maryland (MD)

Telephone: 844-507-4350