#1 24X7 Plumbing and Heating Contractors Owings 20736 MD (844-456-4168)

Posted by in Heating Contractors, on October 12, 2017

Plumbing Repair Services in Owings 20736

24X7 Operation & FREE Consultation Click to Call

Plumbing and Heating Contractors Owings 20736 MD: Got a broken water line? Here is how you can fix it

The water pipe does not give a warning before breaking. You only get to see the results after the deed is done. The sudden gush of water is the obvious indication of a broken water line. When a water line inside the home gets damaged, it is still easy to fix because it is visible. But in case the underground water line breaks, you need to dig deep into the ground and fix it. This means more hassle and expense. You can go through the tips given below to reduce the expenditure and learn how to fix broken water lines yourself.

Some common reasons for the breaking of water lines

Usually, fittings and connections in the water pipe are the first to get affected and develop cracks which leak and eventually erode the PVC pipe to such an extent that it breaks. The underground water lines located under the foundation of the home or between the street and the house break due to deterioration with the passage of time or due to pressure. In some cases, these pipes burst due to freezing. Water lines also break during earthquakes. When you hear a rumbling or hissing sound coming from the main water line even when you are not using any of the faucets, it means that the main water line has developed a crack. Also, when the pressure of water is lower than usual, it indicates the loss of water due to a leak in the pipe. In such cases, it is very important that you know how to fix broken water lines. Or call us today and we can help you find the best Plumbing Emergency Firms in Owings 20736 MD.

Things that you need to keep in mind before repairing the pipe

It is important to evaluate the condition of the pipe before going for a repair. If the pipe is very old, it is better to replace it rather than trying to repair it. In case the pipe has been repaired before, then too replacement is a good choice. If the pipe has developed a crack for the first time, you should consider removing the whole pipe rather than replacing only the damaged part. The reason is that a repaired pipe is more likely to develop cracks again. So instead of spending money twice on repairing, it is wiser to spend it once and install a new pipe which will last longer. Pipe materials like PVC can be easily repaired but lead based pipes become brittle and corroded with time and hence, need to be replaced.

Plumbing and Heating Contractors Owings 20736 MD

How to fix broken water lines?

Here are some tips which might prove to be useful in case you want to learn how to fix broken water lines.

  • Locating the point of the leak

The first thing is to find the crack. The cracks in the pipes located inside the house are evident but the underground pipes are not visible. When these pipes break, the accumulation of water above the ground or the wet mud gives an indication of the leak. If the pipe located behind the wall of the home breaks, you need to put your ear to the wall and locate the leak. When your pump is running and the water meter is moving without any of your faucets being on, it means there is a leak somewhere. That is why professionals and Plumbing Contractors Owings 20736 MD keep an eye on that.

  • Digging under the ground

This advice is given by the top rated Plumbing Repair Services in Owings 20736 MD. The pipes located underground can be repaired only after you dig them out. This is something which you cannot do yourself. You should find a reputable water main contractor to identify the problem and get it fixed. You also need to call your utility company to mark underground pipes and wires so that they do not get damaged when you dig for the water line. When the water line breaks outside the house, the pipe is dug out from the yard to the house. Then it is cut and removed and replaced with a new pipe. The new pipe should be connected with the existing one and all the indoor and outdoor joints should be sealed. You should always check for leaks after the repair work is over. There is also a no-dig repair method in which a resin pipe lining is put in to the pipe till the place of the break. It is then inflated with air so that it touches the wall of the pipe and hardens to seal the pipe. This is called the Cured in Place Pipe method. A minor break can be repaired by putting a sleeve around the pipe or by replacing only that small portion of the pipe.

Plumbing and Heating Contractors Owings Maryland

  • Fixing the visible pipes yourself

When you see a sudden gush of water from any pipe of your house, you should first shut-off the main valve. A small leak can be closed by placing a piece of rubber or any other sealing agent available on the leak. You can then put a C-clamp on it to tighten the seal. A sleeve clamp can also be fixed using a screwdriver. It stops both small and large leaks. These plumbing repair items like hose clamps, duct tapes, rubber and C-clamps are very cheap and can be stored at home in anticipation of such problems. If you want to replace the pipe yourself, then you first need to identify which kind of pipe you have. Once that is done, you need to cut the pipe from the place where it has cracked. The next step is to attach a new pipe to the existing one with the help of fittings and clamps. Finally, the repaired pipe is connected to the faucet and it is ready to be used. Or you can give us a call and we will connect you to the best Plumbing Companies in Owings 20736 MD.

If you follow some of these tips, you can save a lot of money and effort. You can fix the minor leaks yourself, but in case of major leaks or underground damage, it is better to take the help of a professional and licensed plumber. These are some of the things that you need to keep in mind when you are trying to repair a broken pipe line. Now you have all enough information to target the best Plumbing and Heating Contractors Owings 20736 MD.

References

• http://www.instructables.com/id/Water-Line-Leaks-Fix-It-Yourself-Heres-How/

• http://www.oneprojectcloser.com/how-to-repair-underground-water-pipe/

Related Posts:

#1 24X7 Plumbing and Heating Contractors Mayo 21106 MD (844-456-4168)
#1 24X7 Plumbing and Heating Contractors Maryland Line 21105 MD (844-456-4168)
#1 24X7 Plumbing and Heating Contractors Millersville 21108 MD (844-456-4168)

Plumbing and Heating Contractors Owings 20736 MD

Wrap pipes in adhesive-backed felt. Running hot water can cause copper pipes to expand and grind against pipe hangers and joists. So pick up some adhesive-backed felt at the hardware store and cut it into strips. Then remove each hanger and wrap the pipe before refastening the hanger.

Ways in Which You Can Prevent Water Damage: Never pour grease or fat down your sink- Generally, people have a tendency to throw the oil used for frying into their sinks because they think that it will get drained just like water. However, fat and grease quickly clog the pipes and do not allow water to get drained. Instantly, the water gets trapped into your sink and overflows. You have to spend time in mopping up the extra water so that it does not settle into the flooring and cause dampening. You should opt for old disposable jars to store the used oil and throw it away along with the other waste. This can save you a lot of time and trouble.

Remember to check that whoever completes the work as taken the relevant plumbing courses and gas courses as they should carry their official Gas Safe registered tradesman identity card to get the work done properly and safely!

Striking a match during gas leak: This is the major reason of severe gas leak accidents in the US. In gas leak situation people usually neglect the fact that switching on a light or striking a match can lead to the severe explosion. And this includes all types of electrical appliances that are capable of triggering a spark for an explosion or fire.

An assortment of Allen keys is very handy and has many uses.

Clean the Showerhead: Over time, your showerhead gets clogged with all sorts of minerals. Ensure that your shower head is working properly by cleaning it every so often. Remove the showerhead and soak it in vinegar overnight. Wipe down the showerhead and rinse it thoroughly. Reattach the showerhead. That way you can safely remove deposits so that your shower works properly.

Heavy duty paper towels or rags will help clean up water from small leaks.

Tips on Hiring a Plumber: Check whether your plumber is licensed- The plumber’s license is the validation of his experience and skill. In most places, it has become mandatory for plumbers to hold government issued licenses. To get the license, a plumber needs to pass testing and background checks. Whenever you require the services of a plumber, you should always check whether he is licensed or not. It is very important to choose a reputable and qualified plumber to get your plumbing work done in an efficient manner.

Tips for Fixing Low Water Pressure in Your Home: See if there are any leaks- The low pressure of water supply can be caused by leaks in the water pipes. The water flows out from the cracks in pipes and reduces the pressure in other faucets. You need to check all the pipes in your house to see whether there are any leaks. If you find persistent dampness in one part of the ceiling or wall, it is an indication of a leak. Anomalies in the readings of the water meter can also give an indication of a leak. You should get it immediately repaired so that water does not get wasted and proper flow of water is restored in all parts of your house.

Replace Outdated Faucets. Is it time to replace an outdated kitchen or bathroom faucet? Your faucets do more than enhance the appearance of your sink. They also adjust the amount of water passing through. Over time, this can cause an increase in your water bill. Newer eco-friendly designs help control how much water is being used and reduce water flow by up to 30 percent or more. Just choose products with the WaterSense label backed by the EPA. Ask a Ragsdale plumber about installing new faucets in your home.

Use a shower curtain instead of a glass shower enclosure. “A curved rod with a really cool shower curtain is going to save you a lot of money,” Brugnoni says. Plus, a shower curtain adds color and can be changed out easily.

Caustic Soda: Get some rubber gloves and eye protection. Caustic soda (also known as Sodium Hydroxide) can cause nasty chemical burns. You can pick some up from your local hardware store, but always use caution handling it. Pour 3/4 gallon of cold water into a mop bucket, and then add 3 cups of caustic soda. Stir it well with an old wooden spoon. It will begin to fizz and heat up. Pour it into the clogged drain and leave for 20-30 minutes, then flush the drain with boiling water. Repeat if necessary.

Outside the house, you should check for bird’s nest that may be blocking plumbing vents. If there is any, be sure to get them out of the way. You should also inspect bibs and faucets to ensure that water is flowing smoothly and freely. Before you turn on the hose, check for possible leaks and look for signs of cracks that may have been brought about by frozen pipes. You certainly would not want to deal with busted pipes so you should make a thorough inspection first before opening your outdoor faucet.

Use sealant on all gaps and joints.

Consider a corner sink. If you’ve got a tight space with potential traffic-flow problems due to how the entry door or shower door swings open, then consider putting your sink in the corner to free up space.

Ways to Unclog Drains: Buy a snake pipe to pull out the obstacle- This is a cleaning equipment which is very effective. It has to be used manually to bring out the things which are obstructing the drainage system. The snake pipe has a flexible metal spiral string at one end which can be pulled out and extended to slide into the pipe like a snake and after reaching the point of the clog; it can dislodge it and pull it out. The snake pipe should be used after opening the drain pipe from below. This can effectively remove the obstacle in a short time.

Tips for maintaining plumbing during winter: Maintain adequate temperature in your house- The attics and basements are the most vulnerable areas of the house because there is no heat source in these rooms. However, all the main pipes are located in these places. It is important to shut off all sources of cold air to these rooms. The doors and windows need to be properly sealed to prevent freezing of pipes. The thermostat should be kept at more than 55 degrees all the time so that the temperature remains warm enough for the pipes to function normally.

Tips for Fixing Low Water Pressure in Your Home: Locate the water pressure regulator- Many times a water pressure regulator is attached to the main supply valve. It is a wheel-like structure which can either decrease or increase the supply pressure. You can check whether your main supply valve has a regulator or not. If it is there, you can simply adjust it to increase the pressure of the flow of water to your house. It is better to leave this job to a plumber because the regulator is very tight and needs specific tools in order to make adjustments. The plumber also knows how much pressure your pipes can bear so he can make changes accordingly.

Take a look at warm water heater and be sure that this temperature is not really higher than 120 degrees Fahrenheit. If it is, it could possibly force you to get burned or it could reduce the unit’s energy consumption. Should you determine that this temperature is way too high, adjust immediately to protect yourself from any of these things from happening.

Plumbing Repair Services

We connect you to the best Plumbing Emergency Firms in your city!
9588 Surrey Lane
Owings, MD 20736

Calvert, Maryland (MD)

Telephone: 844-456-4168