#1 24X7 Plumbing and Heating Contractors Olney 20830 MD (844-456-4168)

Posted by in Heating Contractors, on October 3, 2017

Plumbing Repair Services in Olney 20830

24X7 Operation & FREE Consultation Click to Call

Plumbing and Heating Contractors Olney 20830 MD: Got a broken water line? Here is how you can fix it

The water pipe does not give a warning before breaking. You only get to see the results after the deed is done. The sudden gush of water is the obvious indication of a broken water line. When a water line inside the home gets damaged, it is still easy to fix because it is visible. But in case the underground water line breaks, you need to dig deep into the ground and fix it. This means more hassle and expense. You can go through the tips given below to reduce the expenditure and learn how to fix broken water lines yourself.

Some common reasons for the breaking of water lines

Usually, fittings and connections in the water pipe are the first to get affected and develop cracks which leak and eventually erode the PVC pipe to such an extent that it breaks. The underground water lines located under the foundation of the home or between the street and the house break due to deterioration with the passage of time or due to pressure. In some cases, these pipes burst due to freezing. Water lines also break during earthquakes. When you hear a rumbling or hissing sound coming from the main water line even when you are not using any of the faucets, it means that the main water line has developed a crack. Also, when the pressure of water is lower than usual, it indicates the loss of water due to a leak in the pipe. In such cases, it is very important that you know how to fix broken water lines. Or call us today and we can help you find the best Plumbing Emergency Firms in Olney 20830 MD.

Things that you need to keep in mind before repairing the pipe

It is important to evaluate the condition of the pipe before going for a repair. If the pipe is very old, it is better to replace it rather than trying to repair it. In case the pipe has been repaired before, then too replacement is a good choice. If the pipe has developed a crack for the first time, you should consider removing the whole pipe rather than replacing only the damaged part. The reason is that a repaired pipe is more likely to develop cracks again. So instead of spending money twice on repairing, it is wiser to spend it once and install a new pipe which will last longer. Pipe materials like PVC can be easily repaired but lead based pipes become brittle and corroded with time and hence, need to be replaced.

Plumbing and Heating Contractors Olney 20830 MD

How to fix broken water lines?

Here are some tips which might prove to be useful in case you want to learn how to fix broken water lines.

  • Locating the point of the leak

The first thing is to find the crack. The cracks in the pipes located inside the house are evident but the underground pipes are not visible. When these pipes break, the accumulation of water above the ground or the wet mud gives an indication of the leak. If the pipe located behind the wall of the home breaks, you need to put your ear to the wall and locate the leak. When your pump is running and the water meter is moving without any of your faucets being on, it means there is a leak somewhere. That is why professionals and Plumbing Contractors Olney 20830 MD keep an eye on that.

  • Digging under the ground

This advice is given by the top rated Plumbing Repair Services in Olney 20830 MD. The pipes located underground can be repaired only after you dig them out. This is something which you cannot do yourself. You should find a reputable water main contractor to identify the problem and get it fixed. You also need to call your utility company to mark underground pipes and wires so that they do not get damaged when you dig for the water line. When the water line breaks outside the house, the pipe is dug out from the yard to the house. Then it is cut and removed and replaced with a new pipe. The new pipe should be connected with the existing one and all the indoor and outdoor joints should be sealed. You should always check for leaks after the repair work is over. There is also a no-dig repair method in which a resin pipe lining is put in to the pipe till the place of the break. It is then inflated with air so that it touches the wall of the pipe and hardens to seal the pipe. This is called the Cured in Place Pipe method. A minor break can be repaired by putting a sleeve around the pipe or by replacing only that small portion of the pipe.

Plumbing and Heating Contractors Olney Maryland

  • Fixing the visible pipes yourself

When you see a sudden gush of water from any pipe of your house, you should first shut-off the main valve. A small leak can be closed by placing a piece of rubber or any other sealing agent available on the leak. You can then put a C-clamp on it to tighten the seal. A sleeve clamp can also be fixed using a screwdriver. It stops both small and large leaks. These plumbing repair items like hose clamps, duct tapes, rubber and C-clamps are very cheap and can be stored at home in anticipation of such problems. If you want to replace the pipe yourself, then you first need to identify which kind of pipe you have. Once that is done, you need to cut the pipe from the place where it has cracked. The next step is to attach a new pipe to the existing one with the help of fittings and clamps. Finally, the repaired pipe is connected to the faucet and it is ready to be used. Or you can give us a call and we will connect you to the best Plumbing Companies in Olney 20830 MD.

If you follow some of these tips, you can save a lot of money and effort. You can fix the minor leaks yourself, but in case of major leaks or underground damage, it is better to take the help of a professional and licensed plumber. These are some of the things that you need to keep in mind when you are trying to repair a broken pipe line. Now you have all enough information to target the best Plumbing and Heating Contractors Olney 20830 MD.

References

• http://www.instructables.com/id/Water-Line-Leaks-Fix-It-Yourself-Heres-How/

• http://www.oneprojectcloser.com/how-to-repair-underground-water-pipe/

Related Posts:

#1 24X7 Plumbing and Heating Contractors Huntingtown 20639 MD (844-456-4168)
#1 24X7 Plumbing and Heating Contractors Ironsides 20643 MD (844-456-4168)
#1 24X7 Plumbing and Heating Contractors Indian Head 20640 MD (844-456-4168)

Plumbing and Heating Contractors Olney 20830 MD

Replace water supply hoses – Over time, water supply hoses can become brittle and burst. Check them periodically and replace your old hoses with the newer types that consist of flexible plastic tubing encased in a stainless steel braided exterior. Better still, upgrade to the new auto-shutoff connector hoses that protect against catastrophic water damage by automatically shutting off the water supply to the washing machine if excess water flow is sensed. These ingenious hoses cost only about $20 each and can be used on washing machines, dishwashers and other plumbing fixtures and appliances.

The first thing you should do is check the main water valve where the water line enters the home. In most cases, the valve looks like a wagon wheel and it is located at the water meter going into the home. Turn the water valve a half-turn in a clockwise direction so it slightly closes off. Then, turn the valve counter clockwise all the way so that it is completely open. There should be a forceful thrust of water that pushes any deposit through the system and raises the pressure. If you think there is sediment built up in your pipes, open your sink faucet, and then turn the water on and off at the main water valve which loosen mineral deposits and push the mineral deposits through the plumbing system.

Trusting the professional for its advertisement only: It is advisable to trust the reputation and service quality of a plumbing service by having a background check for its clients. Many non-professional service providers try to capture clients through attractive advertisements and marketing. Therefore, always be careful and never compromise over the business reputation of professional service providers.

If your plumbing is making strange noises you could have lost something called your “air cushion”. To turn this back on, you’re likely to must switch off your primary water supply. Run all faucets in your home and after that reverse on the main water supply. This will make everything sound better again.

During cold spells make sure to keep your faucets trickling. This will prevent the pipes from freezing over.

Disposable diapers, feminine hygiene products, hair, coffee grounds, toothpaste, food particles, oil from cooking and mineral build up are the most common causes of clogged drains

Get a look at hidden spaces. Whether you’re remodelling or just running wire, knowing what’s inside the walls is helpful.

Use a shop vacuum to remove hard objects. When a hard object like a toothbrush, comb or toy plugs a toilet or drain, a plunger may not be the solution—it might only push the obstruction in deeper. Instead, suck out the water and the obstruction with a wet/dry shop vacuum.

Water Trickling Into the Tank: If you hear a sustained hissing sound coming from your toilet, it’s probably a result of water trickling into the tank via the supply line. In this case the parts to check are the float, the refill tube and the ballcock or inlet-valve assembly. The hissing sound is typically caused by water coming through the inlet valve. First check to see whether the float is sticking or needs adjusting. Next, check to make sure the refill tube isn’t inserted too far into the overflow tube. (It should extend only about 1/4″ below the rim of the overflow tube.) If neither of these adjustments solves the problem, you’ll probably need to replace the ballcock assembly as described above.

Use food coloring, to test for a leaky toilet. Place a few drops in your toilets water tank. Wait a few hours, then check the bowl to see if there is any color there. If there is, it’s an indicator that you have a leaky flapper

Tips for installing and repairing a gas line: You need to buy the right pipes and fittings- This is the first step in installing a new gas line. There are so many sizes available but you need to choose the one which can fit into the gas meter. Most of the domestic gas lines make use of 1.5 inch pipes whereas the commercial gas lines require upto 8 inch long pipes. You should always go for a pipe which is longer than your requirement so that it can come in handy in case there is an overlap. It is important to buy the right size and length of pipe so that money spent on it does not get wasted.

Mirror Frame-Up: Dress up that builder-grade mirror with a fantastic frame, and at a fraction of the price of sourcing a huge hanging mirror. A frame will also hide any age-related wear, says Karen Gray Plaisted, a Warwick, N.Y.-based home stager and decorator. “I often tell clients to add a frame around their mirror to hide the flaking that can happen around the edges, and to give it a more updated look,” she says.

Choose a water heater with an appropriate first-hour rating (FHR) by estimating your family’s peak-hour demand for hot water

Ways to Unclog Drains: Buy a snake pipe to pull out the obstacle- This is a cleaning equipment which is very effective. It has to be used manually to bring out the things which are obstructing the drainage system. The snake pipe has a flexible metal spiral string at one end which can be pulled out and extended to slide into the pipe like a snake and after reaching the point of the clog; it can dislodge it and pull it out. The snake pipe should be used after opening the drain pipe from below. This can effectively remove the obstacle in a short time.

Renovate just part of your bathroom. If you can’t afford to tear the entire bathroom down to the studs and rebuild it, consider renovating just the tub and shower area. “It’s going to give them the impact of a new bathroom,” Brugnoni says.

Save Money on Bathroom Modelling – Hit the recycling center. Do–it–yourselfers can reap big savings with recycled or lightly used fixtures and building materials. Habitat for Humanity operates about 400 ReStores nationwide, which offer salvaged materials at half off home–center prices. One caveat: Many contractors won’t work with salvaged items, or homeowner–supplied materials in general, because they don’t want to assume the liability if something goes wrong. That said, if you’re doing your own work, you can find anything from prehung doors to acrylic skylights to partial bundles of insulation. (To find a ReStore near you, visit habitat.org.)

Tips for installing and repairing a gas line: Make use of epoxy compounds when your gas line has a leak- Epoxy compounds can quickly create a rigid and strong bond and so they can seal the leaks in the gas line easily. This is a temporary repair solution which can save your time and expense and can last for a long time. Epoxy compounds contain resin and a hardener which are suitable for cast iron pipes. They can be poured over the leaks. The bond produced by the epoxy compounds is very effective in blocking gas leaks till you can get the pipe replaced.

Tips for repairing burst pipes: Make use of pipe clamps- In case there are no plumbers available when your pipe bursts, you can repair the pipe yourself with the help of clamps. There are various types of clamps available for different leaks. The pipe clamps come with hinges so that you can simply fix the clamp over the leak and tighten it with the help of screws. These clamps work very well during emergencies and are available every where at a low cost. They stop all kinds of leaks immediately and can act as permanent solutions too in case the leak is not very huge.

Use a bucket of water to flush the toilet. You don’t have to run to the neighbor’s bathroom during a plumbing project. Before you turn off the water supply, fill 2- gallon buckets with water. Flush the toilet by dumping the water in the bowl. You’ll get one flush per bucket. Works just as well as the usual method, although it won’t refill the bowl.

Poking & Taking Apart: Remove the trap or clean-out plug underneath the sink to try clearing the blockage. Use a plumber’s snake or a wire coat hanger to poke down and break apart the mass. You’ll need an empty bucket on hand to catch all the liquid as well as eye goggles firmly in place.

Have more than one way of drying out your bathroom. Reducing mold and mildew begins with removing moisture. To do that it’s best to have a multifaceted approach: a great fan that vents to the outside (not into an attic) and an operable window.

Keep our number handy: 1-888-9TIGER1. You never know when you’ll have a plumbing emergency.

Plumbing Repair Services

We connect you to the best Plumbing Emergency Firms in your city!
4142 Oak Street
Olney, MD 20830

Montgomery, Maryland (MD)

Telephone: 844-456-4168