#1 24X7 Plumbing and Heating Contractors Lanham 20703 MD (844-507-4350)

Posted by in Heating Contractors, on November 23, 2017

Plumbing Repair Services in Lanham 20703

24X7 Operation & FREE Consultation Click to Call

Plumbing and Heating Contractors Lanham 20703 MD: Got a broken water line? Here is how you can fix it

The water pipe does not give a warning before breaking. You only get to see the results after the deed is done. The sudden gush of water is the obvious indication of a broken water line. When a water line inside the home gets damaged, it is still easy to fix because it is visible. But in case the underground water line breaks, you need to dig deep into the ground and fix it. This means more hassle and expense. You can go through the tips given below to reduce the expenditure and learn how to fix broken water lines yourself.

Some common reasons for the breaking of water lines

Usually, fittings and connections in the water pipe are the first to get affected and develop cracks which leak and eventually erode the PVC pipe to such an extent that it breaks. The underground water lines located under the foundation of the home or between the street and the house break due to deterioration with the passage of time or due to pressure. In some cases, these pipes burst due to freezing. Water lines also break during earthquakes. When you hear a rumbling or hissing sound coming from the main water line even when you are not using any of the faucets, it means that the main water line has developed a crack. Also, when the pressure of water is lower than usual, it indicates the loss of water due to a leak in the pipe. In such cases, it is very important that you know how to fix broken water lines. Or call us today and we can help you find the best Plumbing Emergency Firms in Lanham 20703 MD.

Things that you need to keep in mind before repairing the pipe

It is important to evaluate the condition of the pipe before going for a repair. If the pipe is very old, it is better to replace it rather than trying to repair it. In case the pipe has been repaired before, then too replacement is a good choice. If the pipe has developed a crack for the first time, you should consider removing the whole pipe rather than replacing only the damaged part. The reason is that a repaired pipe is more likely to develop cracks again. So instead of spending money twice on repairing, it is wiser to spend it once and install a new pipe which will last longer. Pipe materials like PVC can be easily repaired but lead based pipes become brittle and corroded with time and hence, need to be replaced.

Plumbing and Heating Contractors Lanham 20703 MD

How to fix broken water lines?

Here are some tips which might prove to be useful in case you want to learn how to fix broken water lines.

  • Locating the point of the leak

The first thing is to find the crack. The cracks in the pipes located inside the house are evident but the underground pipes are not visible. When these pipes break, the accumulation of water above the ground or the wet mud gives an indication of the leak. If the pipe located behind the wall of the home breaks, you need to put your ear to the wall and locate the leak. When your pump is running and the water meter is moving without any of your faucets being on, it means there is a leak somewhere. That is why professionals and Plumbing Contractors Lanham 20703 MD keep an eye on that.

  • Digging under the ground

This advice is given by the top rated Plumbing Repair Services in Lanham 20703 MD. The pipes located underground can be repaired only after you dig them out. This is something which you cannot do yourself. You should find a reputable water main contractor to identify the problem and get it fixed. You also need to call your utility company to mark underground pipes and wires so that they do not get damaged when you dig for the water line. When the water line breaks outside the house, the pipe is dug out from the yard to the house. Then it is cut and removed and replaced with a new pipe. The new pipe should be connected with the existing one and all the indoor and outdoor joints should be sealed. You should always check for leaks after the repair work is over. There is also a no-dig repair method in which a resin pipe lining is put in to the pipe till the place of the break. It is then inflated with air so that it touches the wall of the pipe and hardens to seal the pipe. This is called the Cured in Place Pipe method. A minor break can be repaired by putting a sleeve around the pipe or by replacing only that small portion of the pipe.

Plumbing and Heating Contractors Lanham Maryland

  • Fixing the visible pipes yourself

When you see a sudden gush of water from any pipe of your house, you should first shut-off the main valve. A small leak can be closed by placing a piece of rubber or any other sealing agent available on the leak. You can then put a C-clamp on it to tighten the seal. A sleeve clamp can also be fixed using a screwdriver. It stops both small and large leaks. These plumbing repair items like hose clamps, duct tapes, rubber and C-clamps are very cheap and can be stored at home in anticipation of such problems. If you want to replace the pipe yourself, then you first need to identify which kind of pipe you have. Once that is done, you need to cut the pipe from the place where it has cracked. The next step is to attach a new pipe to the existing one with the help of fittings and clamps. Finally, the repaired pipe is connected to the faucet and it is ready to be used. Or you can give us a call and we will connect you to the best Plumbing Companies in Lanham 20703 MD.

If you follow some of these tips, you can save a lot of money and effort. You can fix the minor leaks yourself, but in case of major leaks or underground damage, it is better to take the help of a professional and licensed plumber. These are some of the things that you need to keep in mind when you are trying to repair a broken pipe line. Now you have all enough information to target the best Plumbing and Heating Contractors Lanham 20703 MD.

References

• http://www.instructables.com/id/Water-Line-Leaks-Fix-It-Yourself-Heres-How/

• http://www.oneprojectcloser.com/how-to-repair-underground-water-pipe/

Related Posts:

#1 24X7 Plumbing and Heating Contractors Hagerstown 21740 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Hagerstown 21741 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Glenwood 21738 MD (844-507-4350)

Plumbing and Heating Contractors Lanham 20703 MD

Isolation valves located at each fixture will stop the flow of water to that location. This allows water to continue to service the remainder of the house while the leak is being repaired. It’s a good idea to turn on and off each isolation valve in the house at least once a year to keep them in good working condition.

Tips on Hiring a Plumber: Meet the plumber face-to-face before hiring him- It is not necessary that the person you talk to on the phone is the same person who comes to your house to do the plumbing repair work. It is important to check the credentials of this person and his experience before asking him to do the job. The plumber should be able to answer your queries without fumbling. You can convey your concerns to the plumber by showing him the fault in your plumbing system. The discussion with the plumber regarding various solutions is more convenient when you get to meet him in person.

Flood protection device – An automatic water leak detection device prevents flooding by immediately shutting off both the hot and cold water supply to the washing machine when sensors detect a water leak. These devices are quick and easy to install by homeowners and provide 24/7 protection against damage caused by washing machine floods. Some even sound an audible alarm. Price tag is less than $150.

A water heater setting of 115°F provides enough hot water for most users

Check appliances regularly: Check and maintain your home appliances regularly for leaks, according to manufacturer’s directions.

Cheap fixtures: As the name suggests, cheap fixtures are cheap. The problem is that cheap fixtures don’t last as long. Plumbers as well as the plumbing products cost a good deal of money. Therefore, it’s not a good idea to invest in low quality fixtures. So, if you have been going to work on some DIY home plumbing projects, we suggest that you use the tips given in this article. This way you can rest assured that everything will be fine and you won’t end up creating more problems. For difficult jobs, we always suggest that you hire a good plumber.

Letting Coke soak in your toilet, is the easiest way to clean your bowl.

Find out when it leaks: If the leak starts during the spin cycle on your machine, it could be a leaky drain hose. Locate the drain hose and make sure the connections are all tight. You may have to purchase a new drain hose if the existing one is damaged. This is an easy DIY fix.

Bathroom Design Tips: Tub with a Door – It would be much easier and safer to access than a conventional tub. Unfortunately, what people fail to realize is that with most walk-in tubs, you have to maneuver very carefully through a narrow door and then get out of the way as the door swings shut. And you still have to climb over a low step. So if you’re walking or flexibility is compromised, this unit won’t be effective.

Septic systems should be checked twice a year, to ensure they’re running properly

Tips for Fixing Low Water Pressure in Your Home: Locate the water pressure regulator- Many times a water pressure regulator is attached to the main supply valve. It is a wheel-like structure which can either decrease or increase the supply pressure. You can check whether your main supply valve has a regulator or not. If it is there, you can simply adjust it to increase the pressure of the flow of water to your house. It is better to leave this job to a plumber because the regulator is very tight and needs specific tools in order to make adjustments. The plumber also knows how much pressure your pipes can bear so he can make changes accordingly.

Save Money on Bathroom Modelling – Don’t overspend on wall prep. If your walls are in such rough shape that it would take a painting contractor days of filling and sanding to make them ready for the roller, consider using materials such as Texturglas, from Deerfield Beach, Florida— based company Roos International. A breathable, nontoxic wall covering made of fine glass filaments, Texturglas has a similar look and feel to the fiberglass matting used in auto–body work. It’s available in a variety of surface patterns, takes paint readily, and is designed to be installed right on top of existing surfaces, adding strength while covering up dings.

Spot the sewer valve. Finally, hunt down the location of the household’s main sewer valve. It’s there to provide access to correct a clogged sewer line; don’t make the Roto-Rooter man spend pricey labor time looking for it when the toilets overflow.

The Drain Snake: This is a fairly low-tech piece of equipment that works wonders. It’s basically a long flexible metal rope with a spiral of metal at the end. The following video shows you just what to do.

Save Money on Bathroom Modelling – Make decisions early. Start prowling the aisles at the hardware store or home center way before the wrecking crew shows up. Get a good feeling for what you want in fixtures and appliances and what they cost. If you aren’t absolutely specific up front about what you want, you’ll have to rely on your contractor’s estimate, called an allowance, and his notion of what is acceptable may be quite different from yours. “Ninety–eight percent of the time, allowances are too low,” says Tom Silva. For instance, you may have had a glass–tile backsplash in mind, but your contractor’s bid was for ceramic.

Pump capacity charts are available through professional plumbers and installers or pump manufacturers or they can be found on the web.

Plumbing Repair Services

We connect you to the best Plumbing Emergency Firms in your city!
6989 Jackson Street
Lanham, MD 20703

Prince Georges, Maryland (MD)

Telephone: 844-507-4350