#1 24X7 Plumbing and Heating Contractors La Plata 20646 MD (844-507-4350)

Posted by in Heating Contractors, on March 4, 2018

Plumbing Repair Services in La Plata 20646

24X7 Operation & FREE Consultation Click to Call

Plumbing and Heating Contractors La Plata 20646 MD: Got a broken water line? Here is how you can fix it

The water pipe does not give a warning before breaking. You only get to see the results after the deed is done. The sudden gush of water is the obvious indication of a broken water line. When a water line inside the home gets damaged, it is still easy to fix because it is visible. But in case the underground water line breaks, you need to dig deep into the ground and fix it. This means more hassle and expense. You can go through the tips given below to reduce the expenditure and learn how to fix broken water lines yourself.

Some common reasons for the breaking of water lines

Usually, fittings and connections in the water pipe are the first to get affected and develop cracks which leak and eventually erode the PVC pipe to such an extent that it breaks. The underground water lines located under the foundation of the home or between the street and the house break due to deterioration with the passage of time or due to pressure. In some cases, these pipes burst due to freezing. Water lines also break during earthquakes. When you hear a rumbling or hissing sound coming from the main water line even when you are not using any of the faucets, it means that the main water line has developed a crack. Also, when the pressure of water is lower than usual, it indicates the loss of water due to a leak in the pipe. In such cases, it is very important that you know how to fix broken water lines. Or call us today and we can help you find the best Plumbing Emergency Firms in La Plata 20646 MD.

Things that you need to keep in mind before repairing the pipe

It is important to evaluate the condition of the pipe before going for a repair. If the pipe is very old, it is better to replace it rather than trying to repair it. In case the pipe has been repaired before, then too replacement is a good choice. If the pipe has developed a crack for the first time, you should consider removing the whole pipe rather than replacing only the damaged part. The reason is that a repaired pipe is more likely to develop cracks again. So instead of spending money twice on repairing, it is wiser to spend it once and install a new pipe which will last longer. Pipe materials like PVC can be easily repaired but lead based pipes become brittle and corroded with time and hence, need to be replaced.

Plumbing and Heating Contractors La Plata 20646 MD

How to fix broken water lines?

Here are some tips which might prove to be useful in case you want to learn how to fix broken water lines.

  • Locating the point of the leak

The first thing is to find the crack. The cracks in the pipes located inside the house are evident but the underground pipes are not visible. When these pipes break, the accumulation of water above the ground or the wet mud gives an indication of the leak. If the pipe located behind the wall of the home breaks, you need to put your ear to the wall and locate the leak. When your pump is running and the water meter is moving without any of your faucets being on, it means there is a leak somewhere. That is why professionals and Plumbing Contractors La Plata 20646 MD keep an eye on that.

  • Digging under the ground

This advice is given by the top rated Plumbing Repair Services in La Plata 20646 MD. The pipes located underground can be repaired only after you dig them out. This is something which you cannot do yourself. You should find a reputable water main contractor to identify the problem and get it fixed. You also need to call your utility company to mark underground pipes and wires so that they do not get damaged when you dig for the water line. When the water line breaks outside the house, the pipe is dug out from the yard to the house. Then it is cut and removed and replaced with a new pipe. The new pipe should be connected with the existing one and all the indoor and outdoor joints should be sealed. You should always check for leaks after the repair work is over. There is also a no-dig repair method in which a resin pipe lining is put in to the pipe till the place of the break. It is then inflated with air so that it touches the wall of the pipe and hardens to seal the pipe. This is called the Cured in Place Pipe method. A minor break can be repaired by putting a sleeve around the pipe or by replacing only that small portion of the pipe.

Plumbing and Heating Contractors La Plata Maryland

  • Fixing the visible pipes yourself

When you see a sudden gush of water from any pipe of your house, you should first shut-off the main valve. A small leak can be closed by placing a piece of rubber or any other sealing agent available on the leak. You can then put a C-clamp on it to tighten the seal. A sleeve clamp can also be fixed using a screwdriver. It stops both small and large leaks. These plumbing repair items like hose clamps, duct tapes, rubber and C-clamps are very cheap and can be stored at home in anticipation of such problems. If you want to replace the pipe yourself, then you first need to identify which kind of pipe you have. Once that is done, you need to cut the pipe from the place where it has cracked. The next step is to attach a new pipe to the existing one with the help of fittings and clamps. Finally, the repaired pipe is connected to the faucet and it is ready to be used. Or you can give us a call and we will connect you to the best Plumbing Companies in La Plata 20646 MD.

If you follow some of these tips, you can save a lot of money and effort. You can fix the minor leaks yourself, but in case of major leaks or underground damage, it is better to take the help of a professional and licensed plumber. These are some of the things that you need to keep in mind when you are trying to repair a broken pipe line. Now you have all enough information to target the best Plumbing and Heating Contractors La Plata 20646 MD.


• http://www.instructables.com/id/Water-Line-Leaks-Fix-It-Yourself-Heres-How/

• http://www.oneprojectcloser.com/how-to-repair-underground-water-pipe/

Related Posts:

#1 24X7 Plumbing and Heating Contractors Bethesda 20894 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Kensington 20895 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Garrett Park 20896 MD (844-507-4350)

Plumbing and Heating Contractors La Plata 20646 MD

Keep our number handy: 1-888-9TIGER1. You never know when you’ll have a plumbing emergency.

If you think your plumbing or heating equipment is due for any work it is always advisable to get it done in the summer before you need it as you don’t want to be left in the cold with a higher bill for emergency work.

The most common causes of dripping faucets, are worn washers, bad internal seats or worn/faulty faucet cartridges

Tips for maintaining your bathroom plumbing: Maintain the right water pressure- Both high pressure and low pressure of water supply are not desirable. Low pressure of water can slow down all the daily activities and cause a lot of annoyance. On the other hand, high pressure of water supply can cause a lot of stress for the pipes. If the pipes are not able to withstand this constant pressure, they can break and cause leaking. It is important to adjust the water pressure with the help of a regulator in order to maintain the pipes and prevent water damage due to leaking.

An assortment of Allen keys is very handy and has many uses.

Boiling Water: Tips don’t get any easier than this. Put the kettle on (or use the stove or microwave if you don’t own a kettle) and boil up as much water as it will hold. Now pour it slowly down the drain in two to three stages, allowing the hot water to work for a several seconds in between each pour. This is usually the easiest and quickest way to unclog a drain. If there’s any water left, congratulate yourself with a cup of tea.

When a metal drain leaks it’s usually a great idea to replace the metal with plastic piping

Learn How to Do It Yourself: You shouldn’t attempt to solve all plumbing problems on your own, but there are some things that you should be prepared to do yourself. Knowing how to use a sewer snake, and learning the fine art of unclogging a drain are two cheap plumbing maintenance tips that will save you money in repairs.

Save Money on Bathroom Modelling – Make decisions early. Start prowling the aisles at the hardware store or home center way before the wrecking crew shows up. Get a good feeling for what you want in fixtures and appliances and what they cost. If you aren’t absolutely specific up front about what you want, you’ll have to rely on your contractor’s estimate, called an allowance, and his notion of what is acceptable may be quite different from yours. “Ninety–eight percent of the time, allowances are too low,” says Tom Silva. For instance, you may have had a glass–tile backsplash in mind, but your contractor’s bid was for ceramic.

Don’t overload your garbage disposal with too much food at one time

Tips for maintaining plumbing during winter: Check your sump pump- The sump pump is essential for draining the excess water. It gets activated when it comes in touch with water and starts pumping water out. It is a good idea to take a look at it in the fall season to check whether it is in proper working condition or not. If it is clogged, you should give it a good clean-up. You should also pour a bucket of water over it to make sure that it is getting turned on. If there is a problem with the sump pump, water can freeze over it in winter and cause damage.

Washer floor tray – If you can’t afford to replace or repair your leaking washing machine right away or want to protect against future leaks, slide a water catching tray under your washing machine to catch drips and leaks. It’s a simple, inexpensive way to prevent water damage to your floor from a leaky washing machine. Purchase price around $20.

Baking Soda and Vinegar: Mix 1/3rd of a cup of baking soda with 1/3rd of a cup of vinegar in a measuring cup. It will fizz immediately, and you should waste no time pouring it down the clogged drain. The fizzing action will help to remove the gunk, hair, and grime that has built up in the pipe. Let it sit for one hour or even overnight if you can. Flush with hot water. Alternatively, get as much of the dry baking soda as you can down the drain first, then pour on the vinegar. (See also: 30 Household Products Vinegar Can Replace)

Choose a water heater with an appropriate first-hour rating (FHR) by estimating your family’s peak-hour demand for hot water

Letting Coke soak in your toilet, is the easiest way to clean your bowl.

Pouring chemicals down your drain will corrode the pipes.

If you live in areas where sewers tend to back up sometimes, then you should consider installing a backflow valve on your floor drain. This functional yet seemingly simple device is designed to inhibit backups to your floor drain.

Submersible sump pumps are typically quieter than pedestal pumps.

Bathroom Remodelling Tips – Establish a realistic bathroom remodelling budget. At this time you will also need to determine how you will finance your bathroom remodel. Do you have a savings that you can dip into or will you need get a loan? The answer to this will be a factor in determining your budget. Will this be a larger remodel or are you making minor changes? When establishing your budget keep in mind the design ideas you would like and whether they fall on the pricier side. Also, it will always be less expensive if you don’t need to relocate plumbing fixtures, such as toilets or sinks, so if you are on a smaller budget it is more economical to incorporate your current bathroom layout into the new design.

Consider “smart” bathroom timers and humidity sensors: Bath fan timers are important because excess humidity can cause everything from window condensation and mildew to moisture and rot inside walls. Some new wall switch timers have dual controls for turning off both lights and fans after a preset time. For the ultimate in smart bath fan timers, buy a humidity-sensing fan designed to automatically turn on and off as moisture levels at the ceiling rise and fall.

Consider a corner sink. If you’ve got a tight space with potential traffic-flow problems due to how the entry door or shower door swings open, then consider putting your sink in the corner to free up space.

What to look for in your next contractor – Call the company and take note of who answers the phone. A reliable plumber will be easy to get ahold of and will have a secretary answering a phone for him if he is unable to answer his cell phone.

Egg shells are a great way to clean garbage disposals

If your kitchen sink is clogged by grease, you can remove the clog by pouring ¼ cup of dish soap down the drain, wait about 20 minutes and then pour roughly a quart of boiling water in the drain

Save Money on Bathroom Modelling – Plan with stock sizes in mind. “Ask yourself, ‘Why am I building something 10 feet wide if plywood comes in 4–foot–wide sheets?'” says Lisa Stacholy, of LKS Architects, in Atlanta. The same applies to stock windows and doors: Use manufacturers’ off–the–shelf dimensions from the outset and you will save the premiums of custom fabrication.

Tape is only meant for pipe threads, don’t use tape on compressors or other connections

Plumbing Repair Services

We connect you to the best Plumbing Emergency Firms in your city!
7459 Sherwood Drive
La Plata, MD 20646

Charles, Maryland (MD)

Telephone: 844-507-4350