#1 24X7 Plumbing and Heating Contractors Hyattsville 20783 MD (844-507-4350)

Posted by in Heating Contractors, on January 28, 2018

Plumbing Repair Services in Hyattsville 20783

24X7 Operation & FREE Consultation Click to Call

Plumbing and Heating Contractors Hyattsville 20783 MD: Got a broken water line? Here is how you can fix it

The water pipe does not give a warning before breaking. You only get to see the results after the deed is done. The sudden gush of water is the obvious indication of a broken water line. When a water line inside the home gets damaged, it is still easy to fix because it is visible. But in case the underground water line breaks, you need to dig deep into the ground and fix it. This means more hassle and expense. You can go through the tips given below to reduce the expenditure and learn how to fix broken water lines yourself.

Some common reasons for the breaking of water lines

Usually, fittings and connections in the water pipe are the first to get affected and develop cracks which leak and eventually erode the PVC pipe to such an extent that it breaks. The underground water lines located under the foundation of the home or between the street and the house break due to deterioration with the passage of time or due to pressure. In some cases, these pipes burst due to freezing. Water lines also break during earthquakes. When you hear a rumbling or hissing sound coming from the main water line even when you are not using any of the faucets, it means that the main water line has developed a crack. Also, when the pressure of water is lower than usual, it indicates the loss of water due to a leak in the pipe. In such cases, it is very important that you know how to fix broken water lines. Or call us today and we can help you find the best Plumbing Emergency Firms in Hyattsville 20783 MD.

Things that you need to keep in mind before repairing the pipe

It is important to evaluate the condition of the pipe before going for a repair. If the pipe is very old, it is better to replace it rather than trying to repair it. In case the pipe has been repaired before, then too replacement is a good choice. If the pipe has developed a crack for the first time, you should consider removing the whole pipe rather than replacing only the damaged part. The reason is that a repaired pipe is more likely to develop cracks again. So instead of spending money twice on repairing, it is wiser to spend it once and install a new pipe which will last longer. Pipe materials like PVC can be easily repaired but lead based pipes become brittle and corroded with time and hence, need to be replaced.

Plumbing and Heating Contractors Hyattsville 20783 MD

How to fix broken water lines?

Here are some tips which might prove to be useful in case you want to learn how to fix broken water lines.

  • Locating the point of the leak

The first thing is to find the crack. The cracks in the pipes located inside the house are evident but the underground pipes are not visible. When these pipes break, the accumulation of water above the ground or the wet mud gives an indication of the leak. If the pipe located behind the wall of the home breaks, you need to put your ear to the wall and locate the leak. When your pump is running and the water meter is moving without any of your faucets being on, it means there is a leak somewhere. That is why professionals and Plumbing Contractors Hyattsville 20783 MD keep an eye on that.

  • Digging under the ground

This advice is given by the top rated Plumbing Repair Services in Hyattsville 20783 MD. The pipes located underground can be repaired only after you dig them out. This is something which you cannot do yourself. You should find a reputable water main contractor to identify the problem and get it fixed. You also need to call your utility company to mark underground pipes and wires so that they do not get damaged when you dig for the water line. When the water line breaks outside the house, the pipe is dug out from the yard to the house. Then it is cut and removed and replaced with a new pipe. The new pipe should be connected with the existing one and all the indoor and outdoor joints should be sealed. You should always check for leaks after the repair work is over. There is also a no-dig repair method in which a resin pipe lining is put in to the pipe till the place of the break. It is then inflated with air so that it touches the wall of the pipe and hardens to seal the pipe. This is called the Cured in Place Pipe method. A minor break can be repaired by putting a sleeve around the pipe or by replacing only that small portion of the pipe.

Plumbing and Heating Contractors Hyattsville Maryland

  • Fixing the visible pipes yourself

When you see a sudden gush of water from any pipe of your house, you should first shut-off the main valve. A small leak can be closed by placing a piece of rubber or any other sealing agent available on the leak. You can then put a C-clamp on it to tighten the seal. A sleeve clamp can also be fixed using a screwdriver. It stops both small and large leaks. These plumbing repair items like hose clamps, duct tapes, rubber and C-clamps are very cheap and can be stored at home in anticipation of such problems. If you want to replace the pipe yourself, then you first need to identify which kind of pipe you have. Once that is done, you need to cut the pipe from the place where it has cracked. The next step is to attach a new pipe to the existing one with the help of fittings and clamps. Finally, the repaired pipe is connected to the faucet and it is ready to be used. Or you can give us a call and we will connect you to the best Plumbing Companies in Hyattsville 20783 MD.

If you follow some of these tips, you can save a lot of money and effort. You can fix the minor leaks yourself, but in case of major leaks or underground damage, it is better to take the help of a professional and licensed plumber. These are some of the things that you need to keep in mind when you are trying to repair a broken pipe line. Now you have all enough information to target the best Plumbing and Heating Contractors Hyattsville 20783 MD.

References

• http://www.instructables.com/id/Water-Line-Leaks-Fix-It-Yourself-Heres-How/

• http://www.oneprojectcloser.com/how-to-repair-underground-water-pipe/

Related Posts:

#1 24X7 Plumbing and Heating Contractors Baltimore 21240 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Baltimore 21239 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Rosedale 21237 MD (844-507-4350)

Plumbing and Heating Contractors Hyattsville 20783 MD

Check for a blocked soap drawer: Soap build up can be another cause for a leak. By blocking pipes and drainage tubes, water can’t drain properly. Remove the soap drawer and wash any excess soap off.

Plastic piping is much easier to install, adjust and tighten if a leak develops, than metal piping

Caustic Soda: Get some rubber gloves and eye protection. Caustic soda (also known as Sodium Hydroxide) can cause nasty chemical burns. You can pick some up from your local hardware store, but always use caution handling it. Pour 3/4 gallon of cold water into a mop bucket, and then add 3 cups of caustic soda. Stir it well with an old wooden spoon. It will begin to fizz and heat up. Pour it into the clogged drain and leave for 20-30 minutes, then flush the drain with boiling water. Repeat if necessary.

Tighten everything, but not too tight.

Adding dish soap to the bowl is another method that might remove a clog

Ways in Which You Can Prevent Water Damage: Keep your gutters and downspouts clean- Clogged gutters do not allow the water to drain. The excess water overflows and comes down the side of your house in a cascade. This can cause severe damage to the walls and foundation of your house. You also need to install your downspouts at least 5 to 10 feet away from your house so that there is no pooling of water near it. These gutters and downspouts should be cleaned regularly and specially before the rainy season so that the water gets drained easily.

Look at the faucets for leaks. Examine the knobs and also the faucet itself. Hundreds of gallons water every day can be wasted because of leaks and that’s not good if you’re paying your water bill. By stopping a leak now, it can save you yourself lots of money. Leaks can grow with time as well, so avoid a disaster and view all faucets for leaks!

Plumbing product: First of all, you should try out a live enzyme product like Bio-Clean for the upkeep of your sewer lines. This way, the grease or some other byproducts can keep the lines from getting clogged. While the product is expensive, it can save you lots of hassle down the road.

Check your water meter when no water is being used then check it again about eight hours later. If your meter has moved, that’s a clear sign that you may have a leak

Tips on Hiring a Plumber: You should ask for references- If you are planning a remodelling project for your home for which you require the help of a professional plumber, then you should definitely ask him to provide examples of his past work. This can give you an idea whether you are hiring the right person for the remodelling job or not. If the plumber is hesitant to supply examples, it means that he is not sure about the standard of his work. You should be able to trust the plumber because you are planning to give a big responsibility to him. Only if the references and examples are satisfactory, you should hire his services.

Shop around for tile. You can find nice floor and wall tile for $1 to $2 per square foot. Use that less expensive tile for most of the work, and then incorporate luxury tile as accents.

Save Money on Bathroom Modelling – Tap your contractor’s sources. When it comes to things like flooring, ask your subcontractor if he has odds–and–ends stock left over from other jobs. While renovating a Civil War–era bed-and-breakfast in New Jersey some years back, contractor Bill Asdal needed wood flooring. He made a few phone calls and came up with hundreds of square feet of hardwood, in various lengths and widths, that otherwise would have gone into the trash on other job sites. Just by planing it to uniform thickness, then sanding and refinishing it, he saved his client almost $9,000 in materials costs.

If nothing happens when you flush, it means you have a loose handle or valve

Find out when it leaks: If the leak starts during the spin cycle on your machine, it could be a leaky drain hose. Locate the drain hose and make sure the connections are all tight. You may have to purchase a new drain hose if the existing one is damaged. This is an easy DIY fix.

Do not install the water heater in an unheated basement.

Dish Detergent: If your toilet is clogged, pour 1/4 cup of dish detergent in the bowl. Then boil some water. The dish soap will act as a lubricant and help break up any greasy residue. Then pour the hot water down, and get ready to start plunging. If the plunger doesn’t cut it, rubber gloves may be the next option.

Ways in Which You Can Prevent Water Damage: Have a look at your washing machine supply lines- Washing machines have two water pipes connected to them- one for hot water and the other for cold. These water supply pipes can develop cracks over time and can cause leaking. This is a fairly common problem in most of the households because people do not pay attention to small leaks till the pipes burst and convert the whole house into a swimming pool. To avoid such a fate, you should check these supply pipes regularly for wear and tear. These pipes need to be replaced every five years to avoid bursting.

Mirror Frame-Up: Dress up that builder-grade mirror with a fantastic frame, and at a fraction of the price of sourcing a huge hanging mirror. A frame will also hide any age-related wear, says Karen Gray Plaisted, a Warwick, N.Y.-based home stager and decorator. “I often tell clients to add a frame around their mirror to hide the flaking that can happen around the edges, and to give it a more updated look,” she says.

Upgrade Your Water Heater. When it comes to plumbing tips, one of the best ways to lower your utility bills is to replace a hot water tank that is over ten years old. Older models can drain your electric and gas bill each month. An on-demand gas water heater can save on your utility bills each year. Because you’re only using water that is being heated right away, there is no need to keep stored water warm. If you decide to keep your old water heater, consider having it drained every six months to flush out impurities and improve its performance.

A water heater setting of 115°F provides enough hot water for most users

Disposable diapers, feminine hygiene products, hair, coffee grounds, toothpaste, food particles, oil from cooking and mineral build up are the most common causes of clogged drains

Update Your Pipes: If you live in an older home and still have the original pipes, then you should think about replacing them. Newer plumbing systems are more efficient, as well as being safer and less prone to damage.

What to look for in your next contractor – Find customer reviews of each company online to check the quality of the plumber and his work. Yelp is a great source of customer reviews, but it’s also a great idea to check a more reliable source like the Better Business Bureau before coming to a conclusion. Remember, no one’s perfect so a few bad reviews shouldn’t be a deal breaker. However, if the majority of the reviews are bad or the few bad ones are terrifyingly bad, keep looking.

Save Money on Bathroom Modelling – Don’t overspend on wall prep. If your walls are in such rough shape that it would take a painting contractor days of filling and sanding to make them ready for the roller, consider using materials such as Texturglas, from Deerfield Beach, Florida— based company Roos International. A breathable, nontoxic wall covering made of fine glass filaments, Texturglas has a similar look and feel to the fiberglass matting used in auto–body work. It’s available in a variety of surface patterns, takes paint readily, and is designed to be installed right on top of existing surfaces, adding strength while covering up dings.

Waiting for a response from professionals during gas leak: In case you don’t receive a timely response or due to unavailability of emergency repair service by the service providers, do not wait or jump in yourself. The next best move is to call the local fire department because these days, every fireman is trained to handle gas leaks professionally.

Plumbing Repair Services

We connect you to the best Plumbing Emergency Firms in your city!
7864 Forest Drive
Hyattsville, MD 20783

Prince Georges, Maryland (MD)

Telephone: 844-507-4350