#1 24X7 Plumbing and Heating Contractors Hyattsville 20781 MD (844-507-4350)

Posted by in Heating Contractors, on November 30, 2017

Plumbing Repair Services in Hyattsville 20781

24X7 Operation & FREE Consultation Click to Call

Plumbing and Heating Contractors Hyattsville 20781 MD: Got a broken water line? Here is how you can fix it

The water pipe does not give a warning before breaking. You only get to see the results after the deed is done. The sudden gush of water is the obvious indication of a broken water line. When a water line inside the home gets damaged, it is still easy to fix because it is visible. But in case the underground water line breaks, you need to dig deep into the ground and fix it. This means more hassle and expense. You can go through the tips given below to reduce the expenditure and learn how to fix broken water lines yourself.

Some common reasons for the breaking of water lines

Usually, fittings and connections in the water pipe are the first to get affected and develop cracks which leak and eventually erode the PVC pipe to such an extent that it breaks. The underground water lines located under the foundation of the home or between the street and the house break due to deterioration with the passage of time or due to pressure. In some cases, these pipes burst due to freezing. Water lines also break during earthquakes. When you hear a rumbling or hissing sound coming from the main water line even when you are not using any of the faucets, it means that the main water line has developed a crack. Also, when the pressure of water is lower than usual, it indicates the loss of water due to a leak in the pipe. In such cases, it is very important that you know how to fix broken water lines. Or call us today and we can help you find the best Plumbing Emergency Firms in Hyattsville 20781 MD.

Things that you need to keep in mind before repairing the pipe

It is important to evaluate the condition of the pipe before going for a repair. If the pipe is very old, it is better to replace it rather than trying to repair it. In case the pipe has been repaired before, then too replacement is a good choice. If the pipe has developed a crack for the first time, you should consider removing the whole pipe rather than replacing only the damaged part. The reason is that a repaired pipe is more likely to develop cracks again. So instead of spending money twice on repairing, it is wiser to spend it once and install a new pipe which will last longer. Pipe materials like PVC can be easily repaired but lead based pipes become brittle and corroded with time and hence, need to be replaced.

Plumbing and Heating Contractors Hyattsville 20781 MD

How to fix broken water lines?

Here are some tips which might prove to be useful in case you want to learn how to fix broken water lines.

  • Locating the point of the leak

The first thing is to find the crack. The cracks in the pipes located inside the house are evident but the underground pipes are not visible. When these pipes break, the accumulation of water above the ground or the wet mud gives an indication of the leak. If the pipe located behind the wall of the home breaks, you need to put your ear to the wall and locate the leak. When your pump is running and the water meter is moving without any of your faucets being on, it means there is a leak somewhere. That is why professionals and Plumbing Contractors Hyattsville 20781 MD keep an eye on that.

  • Digging under the ground

This advice is given by the top rated Plumbing Repair Services in Hyattsville 20781 MD. The pipes located underground can be repaired only after you dig them out. This is something which you cannot do yourself. You should find a reputable water main contractor to identify the problem and get it fixed. You also need to call your utility company to mark underground pipes and wires so that they do not get damaged when you dig for the water line. When the water line breaks outside the house, the pipe is dug out from the yard to the house. Then it is cut and removed and replaced with a new pipe. The new pipe should be connected with the existing one and all the indoor and outdoor joints should be sealed. You should always check for leaks after the repair work is over. There is also a no-dig repair method in which a resin pipe lining is put in to the pipe till the place of the break. It is then inflated with air so that it touches the wall of the pipe and hardens to seal the pipe. This is called the Cured in Place Pipe method. A minor break can be repaired by putting a sleeve around the pipe or by replacing only that small portion of the pipe.

Plumbing and Heating Contractors Hyattsville Maryland

  • Fixing the visible pipes yourself

When you see a sudden gush of water from any pipe of your house, you should first shut-off the main valve. A small leak can be closed by placing a piece of rubber or any other sealing agent available on the leak. You can then put a C-clamp on it to tighten the seal. A sleeve clamp can also be fixed using a screwdriver. It stops both small and large leaks. These plumbing repair items like hose clamps, duct tapes, rubber and C-clamps are very cheap and can be stored at home in anticipation of such problems. If you want to replace the pipe yourself, then you first need to identify which kind of pipe you have. Once that is done, you need to cut the pipe from the place where it has cracked. The next step is to attach a new pipe to the existing one with the help of fittings and clamps. Finally, the repaired pipe is connected to the faucet and it is ready to be used. Or you can give us a call and we will connect you to the best Plumbing Companies in Hyattsville 20781 MD.

If you follow some of these tips, you can save a lot of money and effort. You can fix the minor leaks yourself, but in case of major leaks or underground damage, it is better to take the help of a professional and licensed plumber. These are some of the things that you need to keep in mind when you are trying to repair a broken pipe line. Now you have all enough information to target the best Plumbing and Heating Contractors Hyattsville 20781 MD.

References

• http://www.instructables.com/id/Water-Line-Leaks-Fix-It-Yourself-Heres-How/

• http://www.oneprojectcloser.com/how-to-repair-underground-water-pipe/

Related Posts:

#1 24X7 Plumbing and Heating Contractors Maryland Line 21105 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Millersville 21108 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Mayo 21106 MD (844-507-4350)

Plumbing and Heating Contractors Hyattsville 20781 MD

Ways to Unclog Drains: Your dish detergent can unclog your pipe- Something as simple as a dish detergent can be used to remove obstacles from the drain pipe. You need to pour a small quantity of the liquid detergent down the drain and follow it up with some boiling water. The detergent can lubricate the sides of the drain and force the dirty residue to break into smaller components and the hot water can flush away the grease. You can make use of a plunger to push down the remaining dirt and clean your pipe.

Occasionally, the ferrules in a supply tube can get scratched or dented causing water to leak. Use Teflon tape around the ferrule until a permanent repair can be made.

The Bent Wire Hanger: Simple enough, but surprisingly effective. Take a regular wire coat hanger and straighten it out as best you can. Then, bend one end over to create a small hook. Push that past the drain cover and start fishing. You should be able to get all sorts of hair and nasty stuff out of the drain. Remember, you always want to be pulling gunk out, not pushing it further. When you’ve got as much out as you can, run the hot water, and it should clear things up nicely.

If you heat with electricity and live in a warm and sunny climate, consider installing a solar water heater.

Save Money on Bathroom Modelling – Don’t move the kitchen sink. Or the toilet, if you can avoid it. “That often becomes the biggest part of the plumbing–price increase,” says Richard Trethewey, This Old House plumbing and heating expert. If your new layout requires that you move the toilet, use the opportunity to upgrade the pipes at the same time. “That will save you money in the long run,” says Richard.

Tips for repairing burst pipes: Choose the partial repair method to save expenses- If a new pipe bursts either due to freezing or external damage, you can tell the plumber to cut off the pipe from the point of the leak and join a new pipe of the same length to it with the help of soldering or clamps rather than removing the whole pipe and installing a new one. This way you do not have to spend a huge amount on replacing the whole pipe and your problem will also get solved effectively. This is called the partial pipe repair method.

Think about converting your tub to a shower. If you don’t take baths but have a bathtub, that’s basically a 5-foot by 2½-foot area that’s going to waste. Converting it to a shower would be cost effective, because it would make use of the space that’s already there and you wouldn’t have to reroute the plumbing.

Starch products or coffee grounds: It’s not a good idea to put a lot of starch product or coffee grounds in the garbage disposal. This waste can clog your drain. In the same way, coffee grounds may attract grease that can accumulate over time. While a small quantity of these things won’t cause problems, peeling tons of potatoes into the drain can give you lots of problems.

Keep a forced cup and a regular plunger handy. Each plunger has its own specific use and provides extra unclogging power.

Save Money on Bathroom Modelling – Skip the foundation. If local code allows, you may be able to support a small addition on posts and beams, as you would a deck, explains contractor Dennis Gavin, of Gavin Design–Build, in Media, Pennsylvania.

Ways to Unclog Drains: Pour boiling water down the drain- This is a quick fix for the problem of clogged drains. Be it bathroom drains or kitchen sink drains, you can pour a significant quantity of boiling water into the drain pipe. This process should be repeated twice or thrice at small intervals. The boiling water can help to dissolve the settled grime along the sides of the drain pipe and break it into small parts so that the waste can flow down with the water and get drained, leaving the pipe clean.

Monitor your water bill: Sometimes, the only way you know that water is leaking is taking a closer look at your water bill. If your usage jumps significantly from one month to the next without explanation, put your “water detective hat” on. Is there a leak in your crawlspace? Or, is it a pipe in your front yard? Don’t leave mystery leaks unattended!

Use food coloring, to test for a leaky toilet. Place a few drops in your toilets water tank. Wait a few hours, then check the bowl to see if there is any color there. If there is, it’s an indicator that you have a leaky flapper

Tips for installing and repairing a gas line: Clamps can be used to hold broken the broken pipe- When a gas line pipe breaks suddenly; you need to take immediate action to stop the leak. Pipe clamps are very sturdy and strong and can be used for this purpose. They can be used to cover cracks or leaks in the pipe line. They help in holding the broken pieces of the pipe together to bring the gas line back to working condition so that you can make use of it till you get a chance to get it repaired or replaced.

Know your water main: Know the location of your water main, and shut it off if you leave for an extended amount of time. If no water goes in to the house, chances are no faucet drips can wreak havoc on your home while you’re away.

What to look for in your next contractor – Do they guarantee their work? It is an industry standard to verify labor and parts. Be wary of any plumber that does not offer any type of guarantee.

Baking Soda: Remove as much of the liquid that’s backed up as you can. Toss 1 cup of baking soda into the drain then pour a large pot or kettle of boiling hot water over top. If it empties completely, pour down another kettle to give it another hot flush and then let cool water run from the tap for a couple minutes.

Ways to Prevent Washing Machine Leaks: Make lesser use of the detergent- It is a misconception that using more detergent can result in cleaner clothes. The detergent that you use on a daily basis acts as a water softener and leaves behind a sticky residue in the drain pipe of the washing machine. This residue can accumulate over time and can clog the overflow tube of your washer. As the drainage system gets blocked, the water in the hose builds up the pressure and causes small cracks in the pipe through which water starts leaking. It is better to cut down on the usage of detergent rather than spending on a new hose for replacing your broken one.

Save Money on Bathroom Modelling – Buy building supplies at auction. Brian Peppel, a homeowner in Phoenixville, Pennsylvania, attends one building–supply auction each month in nearby Lancaster County. His recent finds include two pallets of concrete block for $10 and a solid–wood prehung exterior door for $65. “Their inventory is everything under the sun, a lot of scratch–and–dent, misordered custom items, or new overstock supplies,” reports Peppel. He once watched the auctioneer’s gavel fall on a large, custom–made triangular window with an original retail value that he pegs at several thousand dollars. The winning bid? $1.

Learn How to Do It Yourself: You shouldn’t attempt to solve all plumbing problems on your own, but there are some things that you should be prepared to do yourself. Knowing how to use a sewer snake, and learning the fine art of unclogging a drain are two cheap plumbing maintenance tips that will save you money in repairs.

Ways to Unclog Drains: Put your clothes hanger to good use- It is amazing what a simple wire hanger lying in your cupboard can do. You need to straighten out the wire hanger and form a hook like structure on the one end of it. This hook should be lowered into the drain holes present at the bottom of the sink in order to fish out the obstacle. Generally, the clogging occurs due to the presence of hair or food waste in the pipe which does not get drained with the water. Instead of pushing the dirt further down the pipe, you should pull out as much of it as you can and then switch on the tap to wash away the remaining dirt. This can clean your pipe instantly.

Don’t go crazy when using detergents, bleach or other chemicals, over using these products can kill the natural bacteria that your septic system needs

Ways to Prevent Washing Machine Leaks: Take a look at the door seals- It is not always the water hose in the washing machine which can cause leaking. If the rubber gaskets around the doors of front-loading machines are dirty, mold can start developing and can cause cracks in the seal. Small cracks can stretch into big ones within a short time and cause water to leak from the door of the machine. You should check the door seal for the presence of mold or mildew and should eradicate it immediately if you spot this problem.

Clean-outs: You should also find out where the clean-outs are. This is really important.

DIY plumbing jobs will need which you learn how to solder copper to the lines to the water supply. You can practice this skill which means you have the ability to run your lines without worrying regarding this leaking. Look online for video tutorials which can help you receive a handle on the way to soldering.

Plumbing Repair Services

We connect you to the best Plumbing Emergency Firms in your city!
6339 Valley Drive
Hyattsville, MD 20781

Prince Georges, Maryland (MD)

Telephone: 844-507-4350