#1 24X7 Plumbing and Heating Contractors Highland 20777 MD (844-507-4350)

Posted by in Heating Contractors, on December 4, 2017

Plumbing Repair Services in Highland 20777

24X7 Operation & FREE Consultation Click to Call

Plumbing and Heating Contractors Highland 20777 MD: Got a broken water line? Here is how you can fix it

The water pipe does not give a warning before breaking. You only get to see the results after the deed is done. The sudden gush of water is the obvious indication of a broken water line. When a water line inside the home gets damaged, it is still easy to fix because it is visible. But in case the underground water line breaks, you need to dig deep into the ground and fix it. This means more hassle and expense. You can go through the tips given below to reduce the expenditure and learn how to fix broken water lines yourself.

Some common reasons for the breaking of water lines

Usually, fittings and connections in the water pipe are the first to get affected and develop cracks which leak and eventually erode the PVC pipe to such an extent that it breaks. The underground water lines located under the foundation of the home or between the street and the house break due to deterioration with the passage of time or due to pressure. In some cases, these pipes burst due to freezing. Water lines also break during earthquakes. When you hear a rumbling or hissing sound coming from the main water line even when you are not using any of the faucets, it means that the main water line has developed a crack. Also, when the pressure of water is lower than usual, it indicates the loss of water due to a leak in the pipe. In such cases, it is very important that you know how to fix broken water lines. Or call us today and we can help you find the best Plumbing Emergency Firms in Highland 20777 MD.

Things that you need to keep in mind before repairing the pipe

It is important to evaluate the condition of the pipe before going for a repair. If the pipe is very old, it is better to replace it rather than trying to repair it. In case the pipe has been repaired before, then too replacement is a good choice. If the pipe has developed a crack for the first time, you should consider removing the whole pipe rather than replacing only the damaged part. The reason is that a repaired pipe is more likely to develop cracks again. So instead of spending money twice on repairing, it is wiser to spend it once and install a new pipe which will last longer. Pipe materials like PVC can be easily repaired but lead based pipes become brittle and corroded with time and hence, need to be replaced.

Plumbing and Heating Contractors Highland 20777 MD

How to fix broken water lines?

Here are some tips which might prove to be useful in case you want to learn how to fix broken water lines.

  • Locating the point of the leak

The first thing is to find the crack. The cracks in the pipes located inside the house are evident but the underground pipes are not visible. When these pipes break, the accumulation of water above the ground or the wet mud gives an indication of the leak. If the pipe located behind the wall of the home breaks, you need to put your ear to the wall and locate the leak. When your pump is running and the water meter is moving without any of your faucets being on, it means there is a leak somewhere. That is why professionals and Plumbing Contractors Highland 20777 MD keep an eye on that.

  • Digging under the ground

This advice is given by the top rated Plumbing Repair Services in Highland 20777 MD. The pipes located underground can be repaired only after you dig them out. This is something which you cannot do yourself. You should find a reputable water main contractor to identify the problem and get it fixed. You also need to call your utility company to mark underground pipes and wires so that they do not get damaged when you dig for the water line. When the water line breaks outside the house, the pipe is dug out from the yard to the house. Then it is cut and removed and replaced with a new pipe. The new pipe should be connected with the existing one and all the indoor and outdoor joints should be sealed. You should always check for leaks after the repair work is over. There is also a no-dig repair method in which a resin pipe lining is put in to the pipe till the place of the break. It is then inflated with air so that it touches the wall of the pipe and hardens to seal the pipe. This is called the Cured in Place Pipe method. A minor break can be repaired by putting a sleeve around the pipe or by replacing only that small portion of the pipe.

Plumbing and Heating Contractors Highland Maryland

  • Fixing the visible pipes yourself

When you see a sudden gush of water from any pipe of your house, you should first shut-off the main valve. A small leak can be closed by placing a piece of rubber or any other sealing agent available on the leak. You can then put a C-clamp on it to tighten the seal. A sleeve clamp can also be fixed using a screwdriver. It stops both small and large leaks. These plumbing repair items like hose clamps, duct tapes, rubber and C-clamps are very cheap and can be stored at home in anticipation of such problems. If you want to replace the pipe yourself, then you first need to identify which kind of pipe you have. Once that is done, you need to cut the pipe from the place where it has cracked. The next step is to attach a new pipe to the existing one with the help of fittings and clamps. Finally, the repaired pipe is connected to the faucet and it is ready to be used. Or you can give us a call and we will connect you to the best Plumbing Companies in Highland 20777 MD.

If you follow some of these tips, you can save a lot of money and effort. You can fix the minor leaks yourself, but in case of major leaks or underground damage, it is better to take the help of a professional and licensed plumber. These are some of the things that you need to keep in mind when you are trying to repair a broken pipe line. Now you have all enough information to target the best Plumbing and Heating Contractors Highland 20777 MD.

References

• http://www.instructables.com/id/Water-Line-Leaks-Fix-It-Yourself-Heres-How/

• http://www.oneprojectcloser.com/how-to-repair-underground-water-pipe/

Related Posts:

#1 24X7 Plumbing and Heating Contractors Rockville 20848 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Rockville 20847 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Rockville 20849 MD (844-507-4350)

Plumbing and Heating Contractors Highland 20777 MD

Ways to Prevent Washing Machine Leaks: Make lesser use of the detergent- It is a misconception that using more detergent can result in cleaner clothes. The detergent that you use on a daily basis acts as a water softener and leaves behind a sticky residue in the drain pipe of the washing machine. This residue can accumulate over time and can clog the overflow tube of your washer. As the drainage system gets blocked, the water in the hose builds up the pressure and causes small cracks in the pipe through which water starts leaking. It is better to cut down on the usage of detergent rather than spending on a new hose for replacing your broken one.

For electric water heaters, install a timer that can automatically turn the hot water off at night and on in the morning. A simple timer can pay for itself in less than a year.

Check appliances regularly: Check and maintain your home appliances regularly for leaks, according to manufacturer’s directions.

Doing some research before your heater fails will enable you to select one that most appropriately meets your needs.

Know where to go when trouble happens. Should plumbing fail, will you know how to stop the flood? Locate the main shut-off valve for the home water supply. If it’s in a dark, hidden, or hard-to-reach place, gather any tools you’ll need for a quick shut-off, and store them nearby. There’s nothing like the frustration of a missing flashlight or a misplaced shut-off key when water’s pouring down the stairs from a broken pipe.

Look for Broken Hose Bibs and Frozen Pipes. Freezing water is a major cause of home plumbing damage. Many a plumbing repair is necessitated by water that’s expanded into ice, bursting pipes and other home plumbing components. When shifting from liquid to solid state, water swells by 9%. For this reason, homeowners should shut off and drain water systems prior to hard freezes. In the spring, check that all parts of your home plumbing system are still functional. Check faucets, outside spigots, and all parts of your plumbing schema. Beyond functionality, check for leaking pipes and pooling water. Should you discover ice damage, arrange for several quotes from local residential plumbers – doing so will generally win you a lower bid.

Tips for maintaining plumbing during winter: Prevent the clogging of drains- It is very important to keep the drain pipes free from clogging because a clogged drain does not allow water to pass through quickly. If your drain pipe is blocked, you should immediately clean it because the water which does not get drained due to pipe clogging can get accumulated and freeze into a block of ice in winter. This can create a tremendous pressure on the inside of the pipe which can lead to cracks. These cracks can widen and cause the pipe to burst in the future. So it is important to unclog the pipes regularly.

Just before the cold season hits, check out the condition of your gutters around the roof of your house. Remove all debris, leaves and branches to help you have a smooth flow of water as well as simple drainage. Caretaking beforehand will assist you to prevent serious problems with plumbing in the future.

Toilet Care 101. The sooner you catch toilet leaks and other problems, the better. A toilet leak can seep into your subflooring, eventually weakening structural beams and leading to collapse! Check your toilet for damage by scouring the exterior for cracks. Also look for water on the floor, seeping through the caulk around the bottom. This indicates that the wax seal on the bottom of the toilet is broken and must be replaced. Also check for a loose handle, or one that must be held down. Such plumbing repair projects are generally inexpensive, and they can save you a bundle on water costs over the long term.

Most newer water meters have an easy to read leak indicator on the face of the dial

Tips for Fixing Low Water Pressure in Your Home: Check individual faucets- If one of your faucets is not providing adequate flow of water, you need to check whether the problem is just with that faucet or with all the faucets. In case only one faucet turns out to be faulty, you can check what is restricting its flow. The aerator may be clogged, the stop valve may be partially closed or the washer may be dislodged. Once you identify the fault, you clean it out or remove it. You can also check the supply valves which are present below the faucets to see whether the valve is completely open or not. This can solve the problem.

Insulate your gas or oil hot-water storage tank and pipes, but be careful not to cover the water heater’s top, bottom, thermostat or burner compartment; when in doubt, get professional help.

Sluggish or Slow: If you notice that things are emptying slower than usual but it’s not completely clogged or backed up yet, do the “Flush” technique right away to prevent a full blockage. Make sure to finish off with a few more hot water dumps.

In addition to getting major things like your boiler checked, there are numerous small checks you can do yourself to ensure your plumbing operates efficiently and smoothly all winter long. Useful checks and preparations include checking exposed water pipes for weak spots or potential leaks, and ensuring they are thoroughly insulated. Damaged or loose connections in your pipe work are also important to identify as these can lead to expensive and time-consuming leaks in the future.

The Bent Wire Hanger: Simple enough, but surprisingly effective. Take a regular wire coat hanger and straighten it out as best you can. Then, bend one end over to create a small hook. Push that past the drain cover and start fishing. You should be able to get all sorts of hair and nasty stuff out of the drain. Remember, you always want to be pulling gunk out, not pushing it further. When you’ve got as much out as you can, run the hot water, and it should clear things up nicely.

Boiling Water: Tips don’t get any easier than this. Put the kettle on (or use the stove or microwave if you don’t own a kettle) and boil up as much water as it will hold. Now pour it slowly down the drain in two to three stages, allowing the hot water to work for a several seconds in between each pour. This is usually the easiest and quickest way to unclog a drain. If there’s any water left, congratulate yourself with a cup of tea.

You can use a wet/dry vac to retrieve items that fall into the toilet

Plumbing Repair Services

We connect you to the best Plumbing Emergency Firms in your city!
3278 Madison Avenue
Highland, MD 20777

Howard, Maryland (MD)

Telephone: 844-507-4350