#1 24X7 Plumbing and Heating Contractors Greenbelt 20771 MD (844-507-4350)

Posted by in Heating Contractors, on February 2, 2018

Plumbing Repair Services in Greenbelt 20771

24X7 Operation & FREE Consultation Click to Call

Plumbing and Heating Contractors Greenbelt 20771 MD: Got a broken water line? Here is how you can fix it

The water pipe does not give a warning before breaking. You only get to see the results after the deed is done. The sudden gush of water is the obvious indication of a broken water line. When a water line inside the home gets damaged, it is still easy to fix because it is visible. But in case the underground water line breaks, you need to dig deep into the ground and fix it. This means more hassle and expense. You can go through the tips given below to reduce the expenditure and learn how to fix broken water lines yourself.

Some common reasons for the breaking of water lines

Usually, fittings and connections in the water pipe are the first to get affected and develop cracks which leak and eventually erode the PVC pipe to such an extent that it breaks. The underground water lines located under the foundation of the home or between the street and the house break due to deterioration with the passage of time or due to pressure. In some cases, these pipes burst due to freezing. Water lines also break during earthquakes. When you hear a rumbling or hissing sound coming from the main water line even when you are not using any of the faucets, it means that the main water line has developed a crack. Also, when the pressure of water is lower than usual, it indicates the loss of water due to a leak in the pipe. In such cases, it is very important that you know how to fix broken water lines. Or call us today and we can help you find the best Plumbing Emergency Firms in Greenbelt 20771 MD.

Things that you need to keep in mind before repairing the pipe

It is important to evaluate the condition of the pipe before going for a repair. If the pipe is very old, it is better to replace it rather than trying to repair it. In case the pipe has been repaired before, then too replacement is a good choice. If the pipe has developed a crack for the first time, you should consider removing the whole pipe rather than replacing only the damaged part. The reason is that a repaired pipe is more likely to develop cracks again. So instead of spending money twice on repairing, it is wiser to spend it once and install a new pipe which will last longer. Pipe materials like PVC can be easily repaired but lead based pipes become brittle and corroded with time and hence, need to be replaced.

Plumbing and Heating Contractors Greenbelt 20771 MD

How to fix broken water lines?

Here are some tips which might prove to be useful in case you want to learn how to fix broken water lines.

  • Locating the point of the leak

The first thing is to find the crack. The cracks in the pipes located inside the house are evident but the underground pipes are not visible. When these pipes break, the accumulation of water above the ground or the wet mud gives an indication of the leak. If the pipe located behind the wall of the home breaks, you need to put your ear to the wall and locate the leak. When your pump is running and the water meter is moving without any of your faucets being on, it means there is a leak somewhere. That is why professionals and Plumbing Contractors Greenbelt 20771 MD keep an eye on that.

  • Digging under the ground

This advice is given by the top rated Plumbing Repair Services in Greenbelt 20771 MD. The pipes located underground can be repaired only after you dig them out. This is something which you cannot do yourself. You should find a reputable water main contractor to identify the problem and get it fixed. You also need to call your utility company to mark underground pipes and wires so that they do not get damaged when you dig for the water line. When the water line breaks outside the house, the pipe is dug out from the yard to the house. Then it is cut and removed and replaced with a new pipe. The new pipe should be connected with the existing one and all the indoor and outdoor joints should be sealed. You should always check for leaks after the repair work is over. There is also a no-dig repair method in which a resin pipe lining is put in to the pipe till the place of the break. It is then inflated with air so that it touches the wall of the pipe and hardens to seal the pipe. This is called the Cured in Place Pipe method. A minor break can be repaired by putting a sleeve around the pipe or by replacing only that small portion of the pipe.

Plumbing and Heating Contractors Greenbelt Maryland

  • Fixing the visible pipes yourself

When you see a sudden gush of water from any pipe of your house, you should first shut-off the main valve. A small leak can be closed by placing a piece of rubber or any other sealing agent available on the leak. You can then put a C-clamp on it to tighten the seal. A sleeve clamp can also be fixed using a screwdriver. It stops both small and large leaks. These plumbing repair items like hose clamps, duct tapes, rubber and C-clamps are very cheap and can be stored at home in anticipation of such problems. If you want to replace the pipe yourself, then you first need to identify which kind of pipe you have. Once that is done, you need to cut the pipe from the place where it has cracked. The next step is to attach a new pipe to the existing one with the help of fittings and clamps. Finally, the repaired pipe is connected to the faucet and it is ready to be used. Or you can give us a call and we will connect you to the best Plumbing Companies in Greenbelt 20771 MD.

If you follow some of these tips, you can save a lot of money and effort. You can fix the minor leaks yourself, but in case of major leaks or underground damage, it is better to take the help of a professional and licensed plumber. These are some of the things that you need to keep in mind when you are trying to repair a broken pipe line. Now you have all enough information to target the best Plumbing and Heating Contractors Greenbelt 20771 MD.

References

• http://www.instructables.com/id/Water-Line-Leaks-Fix-It-Yourself-Heres-How/

• http://www.oneprojectcloser.com/how-to-repair-underground-water-pipe/

Related Posts:

#1 24X7 Plumbing and Heating Contractors Elkton 21922 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Elk Mills 21920 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Elkton 21921 MD (844-507-4350)

Plumbing and Heating Contractors Greenbelt 20771 MD

Toilet Care 101. The sooner you catch toilet leaks and other problems, the better. A toilet leak can seep into your subflooring, eventually weakening structural beams and leading to collapse! Check your toilet for damage by scouring the exterior for cracks. Also look for water on the floor, seeping through the caulk around the bottom. This indicates that the wax seal on the bottom of the toilet is broken and must be replaced. Also check for a loose handle, or one that must be held down. Such plumbing repair projects are generally inexpensive, and they can save you a bundle on water costs over the long term.

A pedestal sump pump works well if you have a smaller diameter basins

The Bent Wire Hanger: Simple enough, but surprisingly effective. Take a regular wire coat hanger and straighten it out as best you can. Then, bend one end over to create a small hook. Push that past the drain cover and start fishing. You should be able to get all sorts of hair and nasty stuff out of the drain. Remember, you always want to be pulling gunk out, not pushing it further. When you’ve got as much out as you can, run the hot water, and it should clear things up nicely.

Do not use an extension cord to plug the pump into the outlet

Isolation valves located at each fixture will stop the flow of water to that location. This allows water to continue to service the remainder of the house while the leak is being repaired. It’s a good idea to turn on and off each isolation valve in the house at least once a year to keep them in good working condition.

Try to minimize the length of piping that runs to your bathroom and kitchen.

Tips for Choosing the Right Plumber – Beware that not all plumbers have experience with all types of plumbing situations. There are all types of people who learned the trade from on-the-job experience. They have had no other formal vocational training or certifications. So their ability to fix complex repairs is often learn-as-you-go. If that sounds scary to you, it should. You can trust the professionalism and expertise of master plumbers, like those at High Priority Plumber, who are trained professionals that keep current with their licenses. In addition, you want to verify that you are working with a licensed company. Licensing usually requires appropriate insurance and worker’s compensation so that you are not held liable if someone were to get hurt in your home while on the job.

Rid Faucets of Mineral Build-Up. White vinegar is a home plumbing must-have. Place it in a plastic baggie, hang that bag on the faucet with a rubber band, and let it soak for twenty-four hours. The vinegar naturally breaks down mineral deposits that limit water pressure.

Natural gas, oil and propane water heaters are less expensive to operate than electric models.

If your toilet won’t stop running than the float arm may not be rising high enough. To remedy this you will need to bend the float arm down or away from the tank wall.

Sump pumps usually come with an automatic on/off switch for your convenience

Tips to Hire a Local Contractor: Read Online Reviews. If a plumbing company has a great track record, it will definitely be reflected online. Check online resources like Yelp to make sure that other people have had good experiences with the company that you’re looking to hire. Reviews are a great way of knowing whether or not the workmanship that that plumbing company provides is exceptional.

When cold weather strikes, go into action. Open the cabinets beneath sinks and bathroom fixtures; warmer household air will help prevent the pipes inside from freezing. Opening taps to a bare trickle keeps water flowing and avoids a frozen blockage.

Take sure to check all of your pipes for leaks, even just a small leak can waste nearly 20 gallons of water per day. Just imagine what a larger leak can do.

Experimenting measures without professional assistance: Immediately after suspecting a leak or a fault in the gas line, call the professional services of gas line repair in Mansfield, TX. Never try to research or experiment on your own. Remember, this can be extremely risky in the absence of an expert plumber or technician.

Know Where the Shutoff Valves Are: When you do experience problems, like an overflowing toilet or a pipe that has exploded, you need to shut off the water immediately to prevent further damage. Know where the shutoff valves are so you can prevent the problem from getting worse.

If nothing happens when you flush, it means you have a loose handle or valve

Ways to Prevent Washing Machine Leaks: Change the water shut-off system- It is better to replace the standard double valve for hot and cold water supply with a single shut-off valve so that in case there is a leak, you can immediately shut off the single main valve and stop the water supply to the machine completely. It is a convenient method to prevent further leaking or bursting of the pipes. It is very handy because you have to remember to flip only one lever on your way out.

Clogged toilet? Let it sit for a few hours or overnight, then try flushing again. Often times this is all you’ll need to do, to fix the issue. Just be ready for the water to over flow if this doesn’t work.

Ways to Unclog Drains: Put your clothes hanger to good use- It is amazing what a simple wire hanger lying in your cupboard can do. You need to straighten out the wire hanger and form a hook like structure on the one end of it. This hook should be lowered into the drain holes present at the bottom of the sink in order to fish out the obstacle. Generally, the clogging occurs due to the presence of hair or food waste in the pipe which does not get drained with the water. Instead of pushing the dirt further down the pipe, you should pull out as much of it as you can and then switch on the tap to wash away the remaining dirt. This can clean your pipe instantly.

Ways to Prevent Washing Machine Leaks: Tighten the hose connections- Hose connections provide water to the hoses which in turn supplies hot and cold water to the washing machine. The moment the spin cycle starts, a lot of pressure is created because water gets filled up in the machine. Not only the hoses but the connections too have to withstand this pressure. It can so happen that with regular use, these connections may become loose and start leaking. To prevent this, you need to check your hose connections from time to time and tighten them up if they appear to be loose.

Trusting the professional for its advertisement only: It is advisable to trust the reputation and service quality of a plumbing service by having a background check for its clients. Many non-professional service providers try to capture clients through attractive advertisements and marketing. Therefore, always be careful and never compromise over the business reputation of professional service providers.

Plumbing Repair Services

We connect you to the best Plumbing Emergency Firms in your city!
7984 Central Avenue
Greenbelt, MD 20771

Prince Georges, Maryland (MD)

Telephone: 844-507-4350