#1 24X7 Plumbing and Heating Contractors Greenbelt 20770 MD (844-456-4168)

Posted by in Heating Contractors, on September 26, 2017

Plumbing Repair Services in Greenbelt 20770

24X7 Operation & FREE Consultation Click to Call

Plumbing and Heating Contractors Greenbelt 20770 MD: Got a broken water line? Here is how you can fix it

The water pipe does not give a warning before breaking. You only get to see the results after the deed is done. The sudden gush of water is the obvious indication of a broken water line. When a water line inside the home gets damaged, it is still easy to fix because it is visible. But in case the underground water line breaks, you need to dig deep into the ground and fix it. This means more hassle and expense. You can go through the tips given below to reduce the expenditure and learn how to fix broken water lines yourself.

Some common reasons for the breaking of water lines

Usually, fittings and connections in the water pipe are the first to get affected and develop cracks which leak and eventually erode the PVC pipe to such an extent that it breaks. The underground water lines located under the foundation of the home or between the street and the house break due to deterioration with the passage of time or due to pressure. In some cases, these pipes burst due to freezing. Water lines also break during earthquakes. When you hear a rumbling or hissing sound coming from the main water line even when you are not using any of the faucets, it means that the main water line has developed a crack. Also, when the pressure of water is lower than usual, it indicates the loss of water due to a leak in the pipe. In such cases, it is very important that you know how to fix broken water lines. Or call us today and we can help you find the best Plumbing Emergency Firms in Greenbelt 20770 MD.

Things that you need to keep in mind before repairing the pipe

It is important to evaluate the condition of the pipe before going for a repair. If the pipe is very old, it is better to replace it rather than trying to repair it. In case the pipe has been repaired before, then too replacement is a good choice. If the pipe has developed a crack for the first time, you should consider removing the whole pipe rather than replacing only the damaged part. The reason is that a repaired pipe is more likely to develop cracks again. So instead of spending money twice on repairing, it is wiser to spend it once and install a new pipe which will last longer. Pipe materials like PVC can be easily repaired but lead based pipes become brittle and corroded with time and hence, need to be replaced.

Plumbing and Heating Contractors Greenbelt 20770 MD

How to fix broken water lines?

Here are some tips which might prove to be useful in case you want to learn how to fix broken water lines.

  • Locating the point of the leak

The first thing is to find the crack. The cracks in the pipes located inside the house are evident but the underground pipes are not visible. When these pipes break, the accumulation of water above the ground or the wet mud gives an indication of the leak. If the pipe located behind the wall of the home breaks, you need to put your ear to the wall and locate the leak. When your pump is running and the water meter is moving without any of your faucets being on, it means there is a leak somewhere. That is why professionals and Plumbing Contractors Greenbelt 20770 MD keep an eye on that.

  • Digging under the ground

This advice is given by the top rated Plumbing Repair Services in Greenbelt 20770 MD. The pipes located underground can be repaired only after you dig them out. This is something which you cannot do yourself. You should find a reputable water main contractor to identify the problem and get it fixed. You also need to call your utility company to mark underground pipes and wires so that they do not get damaged when you dig for the water line. When the water line breaks outside the house, the pipe is dug out from the yard to the house. Then it is cut and removed and replaced with a new pipe. The new pipe should be connected with the existing one and all the indoor and outdoor joints should be sealed. You should always check for leaks after the repair work is over. There is also a no-dig repair method in which a resin pipe lining is put in to the pipe till the place of the break. It is then inflated with air so that it touches the wall of the pipe and hardens to seal the pipe. This is called the Cured in Place Pipe method. A minor break can be repaired by putting a sleeve around the pipe or by replacing only that small portion of the pipe.

Plumbing and Heating Contractors Greenbelt Maryland

  • Fixing the visible pipes yourself

When you see a sudden gush of water from any pipe of your house, you should first shut-off the main valve. A small leak can be closed by placing a piece of rubber or any other sealing agent available on the leak. You can then put a C-clamp on it to tighten the seal. A sleeve clamp can also be fixed using a screwdriver. It stops both small and large leaks. These plumbing repair items like hose clamps, duct tapes, rubber and C-clamps are very cheap and can be stored at home in anticipation of such problems. If you want to replace the pipe yourself, then you first need to identify which kind of pipe you have. Once that is done, you need to cut the pipe from the place where it has cracked. The next step is to attach a new pipe to the existing one with the help of fittings and clamps. Finally, the repaired pipe is connected to the faucet and it is ready to be used. Or you can give us a call and we will connect you to the best Plumbing Companies in Greenbelt 20770 MD.

If you follow some of these tips, you can save a lot of money and effort. You can fix the minor leaks yourself, but in case of major leaks or underground damage, it is better to take the help of a professional and licensed plumber. These are some of the things that you need to keep in mind when you are trying to repair a broken pipe line. Now you have all enough information to target the best Plumbing and Heating Contractors Greenbelt 20770 MD.

References

• http://www.instructables.com/id/Water-Line-Leaks-Fix-It-Yourself-Heres-How/

• http://www.oneprojectcloser.com/how-to-repair-underground-water-pipe/

Related Posts:

#1 24X7 Plumbing and Heating Contractors Maugansville 21767 MD (844-456-4168)
#1 24X7 Plumbing and Heating Contractors Monrovia 21770 MD (844-456-4168)
#1 24X7 Plumbing and Heating Contractors Middletown 21769 MD (844-456-4168)

Plumbing and Heating Contractors Greenbelt 20770 MD

Slow down on the suds: Sometimes using too much detergent can cause lots of suds and lead to leaks. Check the washing machine door for any build up. This is a sign you’re using too much soap and overflowing the machine. Just a small amount of detergent is sufficient.

Bathroom Remodelling Tips – Gather bathroom design ideas. A set of architectural plans will really help you and your remodelling professionals visualize the finished project, but any design preparations can be helpful. Consult with a designer for ideas or check out magazines and cut out ideas, designs or photos that approximate what you want. It can also be helpful to a designer if you can make a sketch on graph paper of what your plans are. Any of these things will be help you to express to your bathroom remodelling professionals.

Make sure your bath fan is big enough: If the fans aren’t clearing out most of the moisture in your bathrooms after five to 10 minutes, your fans may not be moving enough air. Fans are certified by the volume (cfm, or cubic feet per minute) of air exhausted out of the room. To find the recommended fan capacity for your bathroom, multiply the bathroom square footage by 1.1 (assuming an 8-ft. ceiling; for a 9-ft. ceiling, multiply by 1.5). Check the cfm volume of your fan, usually marked on a label under the grille. Replace it with a larger model if it’s too small for the size of your bathroom.

Flush the Right Stuff: It can be hard to remember and even more difficult to practice, but the only things you should flush down your toilet are human waste and toilet paper. There are no real exceptions to this rule.

Ways in Which You Can Prevent Water Damage: Check the bathroom flooring- Washrooms contain the maximum water supply pipes in the house. These pipes are more prone to damage because of regular use. If they start leaking, they can make the floor damp. Soft spots created by this dampness are generally seen around toilets, sinks, tubs and showers. You should immediately call the plumber to fix the leak to prevent the dampness from spreading to other parts of the bathroom or the house.

A leaky toilet can waste enough water to fill an Olympic sized swimming pool in one year. Now just imagine what that is doing to your bill.

Tips for installing and repairing a gas line: Clamps can be used to hold broken the broken pipe- When a gas line pipe breaks suddenly; you need to take immediate action to stop the leak. Pipe clamps are very sturdy and strong and can be used for this purpose. They can be used to cover cracks or leaks in the pipe line. They help in holding the broken pieces of the pipe together to bring the gas line back to working condition so that you can make use of it till you get a chance to get it repaired or replaced.

WaterSense labeled toilets meet or exceed plumbing standards

Tips for maintaining your bathroom plumbing: Pay attention to what you throw into the drains- People find it very easy to throw things into the toilets and drains because they think that everything gets flushed. However, many times, things get stuck in the drains because of such activities. You should not throw anything other than toilet paper into the toilet and the drains in the sinks should not be used to dispose unbreakable or insoluble stuff. You should not even throw chemicals into the drains because they are reactive and can corrode the pipes. It is necessary to follow these steps to save the effort of unclogging drains later.

Tips on Hiring a Plumber: Meet the plumber face-to-face before hiring him- It is not necessary that the person you talk to on the phone is the same person who comes to your house to do the plumbing repair work. It is important to check the credentials of this person and his experience before asking him to do the job. The plumber should be able to answer your queries without fumbling. You can convey your concerns to the plumber by showing him the fault in your plumbing system. The discussion with the plumber regarding various solutions is more convenient when you get to meet him in person.

You can also add some hot or boiling water to your bowl and try flushing, to correct a clog.

Tips for repairing burst pipes: Contact a plumber- A burst pipe cannot be repaired effectively by you because it requires the use of certain tools. After taking the initial measures of stopping the water supply and clamping a rubber seal on the leak, you should contact a plumber to come and take a look at your pipe and provide a solution for the problem. The plumber can guide you whether there is the requirement of a repair or the pipe needs to be replaced. He has the right instruments and parts to repair or replace the pipe and bring it back to the proper working condition.

Take more showers than baths. You use 15-25 gallons of hot water for a bath, but less than 10 gallons during a 5-minute shower.

If your shower head is leaking from where it meets the arm than you may need to just replace a washer. You can do this by loosening the collar using a tape-wrapped rib-joint pliers.

Occasionally, the ferrules in a supply tube can get scratched or dented causing water to leak. Use Teflon tape around the ferrule until a permanent repair can be made.

The first thing you should do is check the main water valve where the water line enters the home. In most cases, the valve looks like a wagon wheel and it is located at the water meter going into the home. Turn the water valve a half-turn in a clockwise direction so it slightly closes off. Then, turn the valve counter clockwise all the way so that it is completely open. There should be a forceful thrust of water that pushes any deposit through the system and raises the pressure. If you think there is sediment built up in your pipes, open your sink faucet, and then turn the water on and off at the main water valve which loosen mineral deposits and push the mineral deposits through the plumbing system.

Plastic piping is cheaper than metal

Let There Be Lighting: Builder-grade lighting is one of the first things many people want to change in a bathroom renovation, and with good cause: The fixtures rarely hold much aesthetic appeal. Adding lots of light to a bathroom is one of the most valuable changes a homeowner can make, and it doesn’t have to break the bank. Shop sales at lighting and home improvement stores, and if your bathroom has easy roof access, consider bringing the outdoors in with a budget skylight like Solatube.

Plumbing Repair Services

We connect you to the best Plumbing Emergency Firms in your city!
5424 Linden Street
Greenbelt, MD 20770

Prince Georges, Maryland (MD)

Telephone: 844-456-4168