#1 24X7 Plumbing and Heating Contractors Glen Echo 20812 MD (844-507-4350)

Posted by in Heating Contractors, on February 18, 2018

Plumbing Repair Services in Glen Echo 20812

24X7 Operation & FREE Consultation Click to Call

Plumbing and Heating Contractors Glen Echo 20812 MD: Got a broken water line? Here is how you can fix it

The water pipe does not give a warning before breaking. You only get to see the results after the deed is done. The sudden gush of water is the obvious indication of a broken water line. When a water line inside the home gets damaged, it is still easy to fix because it is visible. But in case the underground water line breaks, you need to dig deep into the ground and fix it. This means more hassle and expense. You can go through the tips given below to reduce the expenditure and learn how to fix broken water lines yourself.

Some common reasons for the breaking of water lines

Usually, fittings and connections in the water pipe are the first to get affected and develop cracks which leak and eventually erode the PVC pipe to such an extent that it breaks. The underground water lines located under the foundation of the home or between the street and the house break due to deterioration with the passage of time or due to pressure. In some cases, these pipes burst due to freezing. Water lines also break during earthquakes. When you hear a rumbling or hissing sound coming from the main water line even when you are not using any of the faucets, it means that the main water line has developed a crack. Also, when the pressure of water is lower than usual, it indicates the loss of water due to a leak in the pipe. In such cases, it is very important that you know how to fix broken water lines. Or call us today and we can help you find the best Plumbing Emergency Firms in Glen Echo 20812 MD.

Things that you need to keep in mind before repairing the pipe

It is important to evaluate the condition of the pipe before going for a repair. If the pipe is very old, it is better to replace it rather than trying to repair it. In case the pipe has been repaired before, then too replacement is a good choice. If the pipe has developed a crack for the first time, you should consider removing the whole pipe rather than replacing only the damaged part. The reason is that a repaired pipe is more likely to develop cracks again. So instead of spending money twice on repairing, it is wiser to spend it once and install a new pipe which will last longer. Pipe materials like PVC can be easily repaired but lead based pipes become brittle and corroded with time and hence, need to be replaced.

Plumbing and Heating Contractors Glen Echo 20812 MD

How to fix broken water lines?

Here are some tips which might prove to be useful in case you want to learn how to fix broken water lines.

  • Locating the point of the leak

The first thing is to find the crack. The cracks in the pipes located inside the house are evident but the underground pipes are not visible. When these pipes break, the accumulation of water above the ground or the wet mud gives an indication of the leak. If the pipe located behind the wall of the home breaks, you need to put your ear to the wall and locate the leak. When your pump is running and the water meter is moving without any of your faucets being on, it means there is a leak somewhere. That is why professionals and Plumbing Contractors Glen Echo 20812 MD keep an eye on that.

  • Digging under the ground

This advice is given by the top rated Plumbing Repair Services in Glen Echo 20812 MD. The pipes located underground can be repaired only after you dig them out. This is something which you cannot do yourself. You should find a reputable water main contractor to identify the problem and get it fixed. You also need to call your utility company to mark underground pipes and wires so that they do not get damaged when you dig for the water line. When the water line breaks outside the house, the pipe is dug out from the yard to the house. Then it is cut and removed and replaced with a new pipe. The new pipe should be connected with the existing one and all the indoor and outdoor joints should be sealed. You should always check for leaks after the repair work is over. There is also a no-dig repair method in which a resin pipe lining is put in to the pipe till the place of the break. It is then inflated with air so that it touches the wall of the pipe and hardens to seal the pipe. This is called the Cured in Place Pipe method. A minor break can be repaired by putting a sleeve around the pipe or by replacing only that small portion of the pipe.

Plumbing and Heating Contractors Glen Echo Maryland

  • Fixing the visible pipes yourself

When you see a sudden gush of water from any pipe of your house, you should first shut-off the main valve. A small leak can be closed by placing a piece of rubber or any other sealing agent available on the leak. You can then put a C-clamp on it to tighten the seal. A sleeve clamp can also be fixed using a screwdriver. It stops both small and large leaks. These plumbing repair items like hose clamps, duct tapes, rubber and C-clamps are very cheap and can be stored at home in anticipation of such problems. If you want to replace the pipe yourself, then you first need to identify which kind of pipe you have. Once that is done, you need to cut the pipe from the place where it has cracked. The next step is to attach a new pipe to the existing one with the help of fittings and clamps. Finally, the repaired pipe is connected to the faucet and it is ready to be used. Or you can give us a call and we will connect you to the best Plumbing Companies in Glen Echo 20812 MD.

If you follow some of these tips, you can save a lot of money and effort. You can fix the minor leaks yourself, but in case of major leaks or underground damage, it is better to take the help of a professional and licensed plumber. These are some of the things that you need to keep in mind when you are trying to repair a broken pipe line. Now you have all enough information to target the best Plumbing and Heating Contractors Glen Echo 20812 MD.

References

• http://www.instructables.com/id/Water-Line-Leaks-Fix-It-Yourself-Heres-How/

• http://www.oneprojectcloser.com/how-to-repair-underground-water-pipe/

Related Posts:

#1 24X7 Plumbing and Heating Contractors Burtonsville 20866 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Clarksburg 20871 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Spencerville 20868 MD (844-507-4350)

Plumbing and Heating Contractors Glen Echo 20812 MD

What to look for in your next contractor – Verify that the plumber is insured. To get licensed, a plumbing business must secure insurance but always make sure. An uninsured plumber can sue you if he gets hurt while working a job at your home.

Replace Gaskets on Dripping Faucets. Assuming you’re not a total home plumbing greenhorn, you can probably fix a leaky faucet yourself. Nine times out of ten, the culprit is a cracked, worn down gasket – a part you can easily acquire from a plumbing repair outlet. Residential plumbers can also be contracted to fix dripping faucets.

Tips for Fixing Low Water Pressure in Your Home: Check the main shut-off valve- If the water pressure is low throughout the house, you should go out and check the main valve beside the water meter. Sometimes there are two such valves on either side of the meter. These valves need to be completely open. In order to ensure this, you need to turn the valves anti-clockwise as far as they go. A semi-open valve is the most common cause of low water pressure. Opening the valve is a simple solution which you can try out to solve the problem.

Tips for repairing burst pipes: Drain the excess water- After shutting-off the main water supply, you need to make sure that there is no water left in the broken pipe. For this purpose, you need to open all the faucets and flush the toilets. The excess water drains away, leaving the pipe dry and eliminating the possibility of the leaking of water. Once the plumbing system of your house is drained, you can ask a plumber to repair the burst pipe. This makes the process of repairing efficient and quick.

If nothing happens when you flush, it means you have a loose handle or valve

Have everything planned and materials in hand before you start. Changing course in midstream always costs time and money. You should know what you’re doing and when you expect to finish before launching into any grand bathroom renovation.

Never put rice, pasta, bones, corn cobs or beans in your garbage disposal

The Wet & Dry Vacuum: If you have a wet & dry shop vacuum, it can become a terrific tool to unclog drains. First, set it to vacuum liquids. Cover up the vent to prevent a mess. Then, create the tightest seal you can over the drain. You may want to get creative and adapt an old plunger head for this purpose. With the vacuum turned on its highest setting, it can be powerful enough to draw the clog up the pipe and into the vacuum bag. It doesn’t always work, but it’s worth a shot.

It is a wise idea to install flood alarms, which is a device that will alert you in case it comes in contact with water. This device is made to notify you of an impending flooding or serious leak problems.

Don’t make the toilet the first thing you see when open the door. Ask a bathroom designer what his or her best tried and true tip is, and this is what you’re likely to hear. The reasoning is simple. Oftentimes bathroom doors get left open, meaning that you or any guest in your home walking by will see the toilet — which, come on, isn’t the most aesthetically pleasing thing to look at. If you’re hoping for a spa-like vibe, putting the john front and center in the design can sort of kill the mood as you’re transitioning into the room. So, what should you make the focal point? Anything but the toilet.

A spring loaded timer that attaches directly onto your outdoor faucet, will help prevent you from over or under watering your garden

Wrap pipes in adhesive-backed felt. Running hot water can cause copper pipes to expand and grind against pipe hangers and joists. So pick up some adhesive-backed felt at the hardware store and cut it into strips. Then remove each hanger and wrap the pipe before refastening the hanger.

Act without knowing the reason: To understand the reasons of a faulty unit or gas line is the basic step. Gas pipes can break, leak, puncture or explode at any time due to any of the reasons. This may include an accident, a defective gas appliance, aging or corrosion through any means. Whatever the reason is, never take defective gas line lightly or act without being sure of the reason and the level of damage. Negligence in this part may lead to serious and sometimes life-threatening injuries instantly and without any warning.

Tips to Hire a Local Contractor: Ask Friends and Family for Referrals. Your friends and family are sure to be upfront with you about their experience with plumbing companies that they’ve used. If they had a good experience, definitely ask them for an estimate. It’s very important to get your referrals from people that you know and trust.

New home: If you are going to buy a new home, just make certain the sewer lines don’t have any setting or root problems.

Duct tape and leak sealing tape can help out in a plumbing emergency until a permanent fix can be made. Teflon tape will seal up leaks from around threaded connections.

Know your water main: Know the location of your water main, and shut it off if you leave for an extended amount of time. If no water goes in to the house, chances are no faucet drips can wreak havoc on your home while you’re away.

Plumbing Repair Services

We connect you to the best Plumbing Emergency Firms in your city!
9847 Cypress Court
Glen Echo, MD 20812

Montgomery, Maryland (MD)

Telephone: 844-507-4350