#1 24X7 Plumbing and Heating Contractors Germantown 20876 MD (844-507-4350)

Posted by in Heating Contractors, on February 16, 2018

Plumbing Repair Services in Germantown 20876

24X7 Operation & FREE Consultation Click to Call

Plumbing and Heating Contractors Germantown 20876 MD: Got a broken water line? Here is how you can fix it

The water pipe does not give a warning before breaking. You only get to see the results after the deed is done. The sudden gush of water is the obvious indication of a broken water line. When a water line inside the home gets damaged, it is still easy to fix because it is visible. But in case the underground water line breaks, you need to dig deep into the ground and fix it. This means more hassle and expense. You can go through the tips given below to reduce the expenditure and learn how to fix broken water lines yourself.

Some common reasons for the breaking of water lines

Usually, fittings and connections in the water pipe are the first to get affected and develop cracks which leak and eventually erode the PVC pipe to such an extent that it breaks. The underground water lines located under the foundation of the home or between the street and the house break due to deterioration with the passage of time or due to pressure. In some cases, these pipes burst due to freezing. Water lines also break during earthquakes. When you hear a rumbling or hissing sound coming from the main water line even when you are not using any of the faucets, it means that the main water line has developed a crack. Also, when the pressure of water is lower than usual, it indicates the loss of water due to a leak in the pipe. In such cases, it is very important that you know how to fix broken water lines. Or call us today and we can help you find the best Plumbing Emergency Firms in Germantown 20876 MD.

Things that you need to keep in mind before repairing the pipe

It is important to evaluate the condition of the pipe before going for a repair. If the pipe is very old, it is better to replace it rather than trying to repair it. In case the pipe has been repaired before, then too replacement is a good choice. If the pipe has developed a crack for the first time, you should consider removing the whole pipe rather than replacing only the damaged part. The reason is that a repaired pipe is more likely to develop cracks again. So instead of spending money twice on repairing, it is wiser to spend it once and install a new pipe which will last longer. Pipe materials like PVC can be easily repaired but lead based pipes become brittle and corroded with time and hence, need to be replaced.

Plumbing and Heating Contractors Germantown 20876 MD

How to fix broken water lines?

Here are some tips which might prove to be useful in case you want to learn how to fix broken water lines.

  • Locating the point of the leak

The first thing is to find the crack. The cracks in the pipes located inside the house are evident but the underground pipes are not visible. When these pipes break, the accumulation of water above the ground or the wet mud gives an indication of the leak. If the pipe located behind the wall of the home breaks, you need to put your ear to the wall and locate the leak. When your pump is running and the water meter is moving without any of your faucets being on, it means there is a leak somewhere. That is why professionals and Plumbing Contractors Germantown 20876 MD keep an eye on that.

  • Digging under the ground

This advice is given by the top rated Plumbing Repair Services in Germantown 20876 MD. The pipes located underground can be repaired only after you dig them out. This is something which you cannot do yourself. You should find a reputable water main contractor to identify the problem and get it fixed. You also need to call your utility company to mark underground pipes and wires so that they do not get damaged when you dig for the water line. When the water line breaks outside the house, the pipe is dug out from the yard to the house. Then it is cut and removed and replaced with a new pipe. The new pipe should be connected with the existing one and all the indoor and outdoor joints should be sealed. You should always check for leaks after the repair work is over. There is also a no-dig repair method in which a resin pipe lining is put in to the pipe till the place of the break. It is then inflated with air so that it touches the wall of the pipe and hardens to seal the pipe. This is called the Cured in Place Pipe method. A minor break can be repaired by putting a sleeve around the pipe or by replacing only that small portion of the pipe.

Plumbing and Heating Contractors Germantown Maryland

  • Fixing the visible pipes yourself

When you see a sudden gush of water from any pipe of your house, you should first shut-off the main valve. A small leak can be closed by placing a piece of rubber or any other sealing agent available on the leak. You can then put a C-clamp on it to tighten the seal. A sleeve clamp can also be fixed using a screwdriver. It stops both small and large leaks. These plumbing repair items like hose clamps, duct tapes, rubber and C-clamps are very cheap and can be stored at home in anticipation of such problems. If you want to replace the pipe yourself, then you first need to identify which kind of pipe you have. Once that is done, you need to cut the pipe from the place where it has cracked. The next step is to attach a new pipe to the existing one with the help of fittings and clamps. Finally, the repaired pipe is connected to the faucet and it is ready to be used. Or you can give us a call and we will connect you to the best Plumbing Companies in Germantown 20876 MD.

If you follow some of these tips, you can save a lot of money and effort. You can fix the minor leaks yourself, but in case of major leaks or underground damage, it is better to take the help of a professional and licensed plumber. These are some of the things that you need to keep in mind when you are trying to repair a broken pipe line. Now you have all enough information to target the best Plumbing and Heating Contractors Germantown 20876 MD.

References

• http://www.instructables.com/id/Water-Line-Leaks-Fix-It-Yourself-Heres-How/

• http://www.oneprojectcloser.com/how-to-repair-underground-water-pipe/

Related Posts:

#1 24X7 Plumbing and Heating Contractors Boonsboro 21713 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Adamstown 21710 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Big Pool 21711 MD (844-507-4350)

Plumbing and Heating Contractors Germantown 20876 MD

Check your water meter when no water is being used then check it again about eight hours later. If your meter has moved, that’s a clear sign that you may have a leak

Observe the outlet on your sump pump to make sure water is actually being pumped

What to look for in your next contractor – like with any other contractor, you should only hire a licensed plumber. Without a license, the plumber’s credentials are unverifiable, and more likely than not, they will show the same level of attention to your job as they did to their business.

Check your pressure regulator because sometimes this can cause low water pressure. The pressure regulator is the device shaped like a bell with a screw at the end. You can normally find the pressure regulator either under the home or below the frontal connection. Often you just have to adjust the screw to restore pressure. Tighten the screw to boost the pressure. Make sure you set it between 45 – 60 psi.

Check for a blocked soap drawer: Soap build up can be another cause for a leak. By blocking pipes and drainage tubes, water can’t drain properly. Remove the soap drawer and wash any excess soap off.

Tips to Hire a Local Contractor: Take into Account How Long They’ve Been in Business. You want to ask the plumbing company just how long they’ve been in business and how many years of experience the plumber has. A company that has been in business for a long time has shown that they are known in the community for doing quality work.

Get your self professional tubing cutters, reciprocating-saw blades, hacksaw blades and a plastic pipe saw. Do it right or expect trouble down the road.

Ways in Which You Can Prevent Water Damage: Never pour grease or fat down your sink- Generally, people have a tendency to throw the oil used for frying into their sinks because they think that it will get drained just like water. However, fat and grease quickly clog the pipes and do not allow water to get drained. Instantly, the water gets trapped into your sink and overflows. You have to spend time in mopping up the extra water so that it does not settle into the flooring and cause dampening. You should opt for old disposable jars to store the used oil and throw it away along with the other waste. This can save you a lot of time and trouble.

Use a strong magnet to find hidden pipes. When trying to locate a pipe under the floor, attach a rare earth (neodymium) magnet to an electrical fish tape and feed it into drain lines through the cleanout plug. Locate the magnet (and the pipe) under the floor using an ordinary compass, which will turn wildly when it finds the strong magnet.

Pouring chemicals down your drain will corrode the pipes.

WaterSense labeled toilets get the job done

If you call a plumber right when you first notice a leaky faucet you’ll likely only need a simple, small repair, but if you wait a few months, the leak will worsen and cause more damages leading to more costly repairs.

Pick the right vanity. Vanities aren’t just for looks. Get one too big and you could mess up your bathroom’s traffic routes. Too small and you’ll be scrambling for more countertop space and storage. Pick the wrong material and you could have maintenance issues on your hands.

Use duct tape or pipe sealing tape to pull together a crack in a pipe, reducing the leak as a temporary solution.

Don’t Toss Money Down the Toilet — Update It. Here’s some potty talk you won’t want to miss: When remodeling your bathroom, consider replacing your toilet seat and lid instead of tossing out the whole porcelain perch. Just changing out these two tops can give your toilet a fresh look without buying a new unit, which saves you plumber installation fees, too.

Tips for maintaining plumbing during winter: Change old pipes- It is better to change your water supply pipes if they are a few years old. They may have developed small cracks and are more likely to get damaged or broken in case they get frozen. You should check all the pipes before winter sets in and see which ones need replacement. A new plumbing system can work more efficiently and is less likely to get damaged easily. Instead of bearing the pipe repair or replacement expenses later, it is smarter to spend on a new system now.

Understand standard bathroom dimensions. Knowing a few key measurements, like the size of a typical bathtub and how much space is needed for a toilet, will help you plan your remodel more efficiently.

Clean-outs: You should also find out where the clean-outs are. This is really important.

How to deal with water damage? Make use of humidity sensors- You cannot spot the moisture that gets seeped into the walls or the ceiling. There are humidity sensors which can help you to locate these wet spots. Once you know which places are most affected, you can start the drying or damage repair process from there. This saves time and helps in tracking the amount of moisture trapped in such inaccessible places. If even a small amount of dampness is allowed to exist, it can cause rot and mold formation which can gradually eat away at the foundation of your house and make it hollow from within. Humidity sensors help in preventing this.

Desperate Situation & Water Won’t Empty: Chances are if you do a treatment with baking soda and vinegar, have the stopper removed, and leave the backed up mess overnight, you’ll find the liquid should have emptied by the morning. The vinegar and baking soda should have worked some of the buildup free on its way down. Do a hot water flush first thing and if the liquid empties as quickly as it normally would, you should be ok–do a couple hot water dumps though just to make sure. However, if the liquid empties slowly, you might want to check the trap to make sure there’s no mass blocking it. If there isn’t, try a couple more treatments of the Flush throughout the day. You just might get away with not having to call in the plumber.

Don’t make the toilet the first thing you see when open the door. Ask a bathroom designer what his or her best tried and true tip is, and this is what you’re likely to hear. The reasoning is simple. Oftentimes bathroom doors get left open, meaning that you or any guest in your home walking by will see the toilet — which, come on, isn’t the most aesthetically pleasing thing to look at. If you’re hoping for a spa-like vibe, putting the john front and center in the design can sort of kill the mood as you’re transitioning into the room. So, what should you make the focal point? Anything but the toilet.

Save Money on Bathroom Modelling – Limit recessed light fixtures. The more recessed lights you put in, the more it’s going to cost,” says Tom Silva, This Old House’s general contractor. In addition to the fixtures, there’s the labor to cut all the holes and insulate them properly. A wall– or ceiling–mounted light can also deliver more wattage, which means you may be able to get away with fewer fixtures.

But don’t act rashly: Your first impulse will be to wade in and rescue your stuff. But that water might be dangerous, so put on your boots and take precautions. Any water in contact with electricity might be deadly. Stay out of the water until you, an electrician or your utility has turned off the power to your basement. Floodwaters may contain toxic chemicals and will almost certainly breed dangerous bacteria. Protect cuts and open sores from floodwaters and wear plastic gloves when handling your possessions.

If you cannot thaw your pipes, don’t force it. Instead, call a licensed plumber.

Ways to choose your plumber – Length of time in business – Ask the plumber how long he or she has been in business. A larger company will likely have plumbers with years of experience, but you should still ask. It’s a good sign if the company has been in business for several years because it often means it has a proven track record of quality work.

Ways to choose your plumber – Licensure – Most states require plumbers to hold a license, though a couple of states like New York and Kansas do not. If your state does not require licensing, check to see if there have been any formal complaints filed against the plumber you are considering.

A leaky toilet can increase your water usages by more than 40%, you’ll want to repair the leak ASAP to save money on your water bill

Insulate your gas or oil hot-water storage tank and pipes, but be careful not to cover the water heater’s top, bottom, thermostat or burner compartment; when in doubt, get professional help.

Distilled vinegar can remove hard water stains on your shower head. Just tie a bag of vinegar around your shower head and leave it there for a few hours. Then you can simply wipe away the stains with a cloth.

Learn How to Do It Yourself: You shouldn’t attempt to solve all plumbing problems on your own, but there are some things that you should be prepared to do yourself. Knowing how to use a sewer snake, and learning the fine art of unclogging a drain are two cheap plumbing maintenance tips that will save you money in repairs.

Plumbing Repair Services

We connect you to the best Plumbing Emergency Firms in your city!
5714 Lafayette Avenue
Germantown, MD 20876

Montgomery, Maryland (MD)

Telephone: 844-507-4350