#1 24X7 Plumbing and Heating Contractors Germantown 20874 MD (844-507-4350)

Posted by in Heating Contractors, on November 23, 2017

Plumbing Repair Services in Germantown 20874

24X7 Operation & FREE Consultation Click to Call

Plumbing and Heating Contractors Germantown 20874 MD: Got a broken water line? Here is how you can fix it

The water pipe does not give a warning before breaking. You only get to see the results after the deed is done. The sudden gush of water is the obvious indication of a broken water line. When a water line inside the home gets damaged, it is still easy to fix because it is visible. But in case the underground water line breaks, you need to dig deep into the ground and fix it. This means more hassle and expense. You can go through the tips given below to reduce the expenditure and learn how to fix broken water lines yourself.

Some common reasons for the breaking of water lines

Usually, fittings and connections in the water pipe are the first to get affected and develop cracks which leak and eventually erode the PVC pipe to such an extent that it breaks. The underground water lines located under the foundation of the home or between the street and the house break due to deterioration with the passage of time or due to pressure. In some cases, these pipes burst due to freezing. Water lines also break during earthquakes. When you hear a rumbling or hissing sound coming from the main water line even when you are not using any of the faucets, it means that the main water line has developed a crack. Also, when the pressure of water is lower than usual, it indicates the loss of water due to a leak in the pipe. In such cases, it is very important that you know how to fix broken water lines. Or call us today and we can help you find the best Plumbing Emergency Firms in Germantown 20874 MD.

Things that you need to keep in mind before repairing the pipe

It is important to evaluate the condition of the pipe before going for a repair. If the pipe is very old, it is better to replace it rather than trying to repair it. In case the pipe has been repaired before, then too replacement is a good choice. If the pipe has developed a crack for the first time, you should consider removing the whole pipe rather than replacing only the damaged part. The reason is that a repaired pipe is more likely to develop cracks again. So instead of spending money twice on repairing, it is wiser to spend it once and install a new pipe which will last longer. Pipe materials like PVC can be easily repaired but lead based pipes become brittle and corroded with time and hence, need to be replaced.

Plumbing and Heating Contractors Germantown 20874 MD

How to fix broken water lines?

Here are some tips which might prove to be useful in case you want to learn how to fix broken water lines.

  • Locating the point of the leak

The first thing is to find the crack. The cracks in the pipes located inside the house are evident but the underground pipes are not visible. When these pipes break, the accumulation of water above the ground or the wet mud gives an indication of the leak. If the pipe located behind the wall of the home breaks, you need to put your ear to the wall and locate the leak. When your pump is running and the water meter is moving without any of your faucets being on, it means there is a leak somewhere. That is why professionals and Plumbing Contractors Germantown 20874 MD keep an eye on that.

  • Digging under the ground

This advice is given by the top rated Plumbing Repair Services in Germantown 20874 MD. The pipes located underground can be repaired only after you dig them out. This is something which you cannot do yourself. You should find a reputable water main contractor to identify the problem and get it fixed. You also need to call your utility company to mark underground pipes and wires so that they do not get damaged when you dig for the water line. When the water line breaks outside the house, the pipe is dug out from the yard to the house. Then it is cut and removed and replaced with a new pipe. The new pipe should be connected with the existing one and all the indoor and outdoor joints should be sealed. You should always check for leaks after the repair work is over. There is also a no-dig repair method in which a resin pipe lining is put in to the pipe till the place of the break. It is then inflated with air so that it touches the wall of the pipe and hardens to seal the pipe. This is called the Cured in Place Pipe method. A minor break can be repaired by putting a sleeve around the pipe or by replacing only that small portion of the pipe.

Plumbing and Heating Contractors Germantown Maryland

  • Fixing the visible pipes yourself

When you see a sudden gush of water from any pipe of your house, you should first shut-off the main valve. A small leak can be closed by placing a piece of rubber or any other sealing agent available on the leak. You can then put a C-clamp on it to tighten the seal. A sleeve clamp can also be fixed using a screwdriver. It stops both small and large leaks. These plumbing repair items like hose clamps, duct tapes, rubber and C-clamps are very cheap and can be stored at home in anticipation of such problems. If you want to replace the pipe yourself, then you first need to identify which kind of pipe you have. Once that is done, you need to cut the pipe from the place where it has cracked. The next step is to attach a new pipe to the existing one with the help of fittings and clamps. Finally, the repaired pipe is connected to the faucet and it is ready to be used. Or you can give us a call and we will connect you to the best Plumbing Companies in Germantown 20874 MD.

If you follow some of these tips, you can save a lot of money and effort. You can fix the minor leaks yourself, but in case of major leaks or underground damage, it is better to take the help of a professional and licensed plumber. These are some of the things that you need to keep in mind when you are trying to repair a broken pipe line. Now you have all enough information to target the best Plumbing and Heating Contractors Germantown 20874 MD.

References

• http://www.instructables.com/id/Water-Line-Leaks-Fix-It-Yourself-Heres-How/

• http://www.oneprojectcloser.com/how-to-repair-underground-water-pipe/

Related Posts:

#1 24X7 Plumbing and Heating Contractors Baltimore 21206 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Gwynn Oak 21207 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Baltimore 21205 MD (844-507-4350)

Plumbing and Heating Contractors Germantown 20874 MD

If your toilet is making noise it can be due to restricted water flow or a defective ball cock assembly. This can be addressed by replacing the entire ball cock assembly or oiling the trip lever. Prior to doing this please make sure to adjust the shut off valve first. Additionally be sure to turn off the water at the fixture shut off valve followed by flushing the toilet to an empty tank. Sponge up any remaining water.

What to look for in your next contractor – Do they guarantee their work? It is an industry standard to verify labor and parts. Be wary of any plumber that does not offer any type of guarantee.

Ways to Prevent Washing Machine Leaks: Keep the washer lint-free- It does not seem likely that something as minute as lint can cause trouble. However, lint has a tendency to accumulate over time in the drain pipe and clog it. You need to take measures to prevent lint accumulation so that water can drain easily from the machine. There are mesh lint catchers available which do not cost much. You can attach them to the end of the drain pipe. These can help in removing lint from the pipe. You have to change these lint catchers every month to keep the pipe line-free.

Tips for installing and repairing a gas line: Always turn off the gas supply before installation or repair- This is a necessary step which should not be avoided. You should turn off the valve present beside the gas meter before removing the old pipe and replacing it with a new one and also while repairing the present one. In case the valve is open, gas can leak and can lead to a fatal disaster by causing a big fire. The valve should be perpendicular to the pipe when it is closed. There is no change in the gas meter when the valve is closed. You should check all this and then start the gas line work.

Don’t make the toilet the first thing you see when open the door. Ask a bathroom designer what his or her best tried and true tip is, and this is what you’re likely to hear. The reasoning is simple. Oftentimes bathroom doors get left open, meaning that you or any guest in your home walking by will see the toilet — which, come on, isn’t the most aesthetically pleasing thing to look at. If you’re hoping for a spa-like vibe, putting the john front and center in the design can sort of kill the mood as you’re transitioning into the room. So, what should you make the focal point? Anything but the toilet.

Do not use galvanized steel for your plumbing. Galvanized steel can be corrosion ridden. Copper plumbing is your best bet.

Tips for maintaining plumbing during winter: Shut off your main valve before going for a trip- Winter brings the holiday season with it. Many people make travelling plans during this time of the year. One of the things that people need to keep in mind is to shut the water supply to their houses. It is important to shut off the main water valve before leaving to prevent pipes from getting frozen up because of the presence of residual water when you are away. This small precaution can save you from a lot of hassle when you come back and allows you to enjoy your vacation in a stress-free manner.

Ways to Unclog Drains: Try the combination of baking soda and vinegar- This is a very simple home remedy for unclogging drains. You need to take equal measures of vinegar and baking soda in a vessel. As soon as the fizz starts to develop, you should pour it down the drain. The activated combination of baking soda and vinegar can help to dislodge the dirt and grime that has accumulated in the pipe. After pouring this mixture, you should let it settle for a few hours before flushing the pipe with hot water. This can help in removing the dislodged dirt and waste and clear the pipe.

Tips for repairing burst pipes: Contact a plumber- A burst pipe cannot be repaired effectively by you because it requires the use of certain tools. After taking the initial measures of stopping the water supply and clamping a rubber seal on the leak, you should contact a plumber to come and take a look at your pipe and provide a solution for the problem. The plumber can guide you whether there is the requirement of a repair or the pipe needs to be replaced. He has the right instruments and parts to repair or replace the pipe and bring it back to the proper working condition.

Check the hoses: Locate the hoses that feed and drain the water from your machine. If you find water where they are connected, check the clamps to make sure they are tight. If the clamps are secure, check the outlet pipe to make sure there aren’t any kinks are preventing the water from flowing. If you find any leaks in the hose, you’ll have to replace them.

Tips for maintaining your bathroom plumbing: Prevent pipes from freezing in winters- Frozen water pipes are a common phenomenon during winter. If a pipe freezes up, it can burst in a short time if it is not thawed. However, you can prevent the pipes from freezing with the help of pipe insulation techniques. There are insulating pipe sleeves which are available that protect the pipe from cold temperatures. You can also seal doors and windows tightly to avoid cold air from coming into the room. Maintaining the house temperature at an adequate level can prevent pipes from freezing. You should make use of all the faucets so that water is not allowed to freeze. Such preventive measures are much better than spending on repairing or replacement of a burst pipe.

How to deal with water damage? Facilitate the drying process- When there is water damage, it can take a long time to dry up. In order to accelerate this process, you should remove the wall board that is in touch with water. Drywall can absorb a lot of moisture, so it needs to be replaced. Opening the doors and windows and letting in air can quicken the process of drying. All wet items need to be removed, especially wet carpets. Wet-dry vacuum can help in removing the standing water. It can easily suck up the excess water and clear the surface of the flooring. Then the floor can be wiped to remove any leftover moisture content.

Have everything planned and materials in hand before you start. Changing course in midstream always costs time and money. You should know what you’re doing and when you expect to finish before launching into any grand bathroom renovation.

What to look for in your next contractor – Always ask what is provided for the quoted price.

Tips to Hire a Local Contractor: Read Online Reviews. If a plumbing company has a great track record, it will definitely be reflected online. Check online resources like Yelp to make sure that other people have had good experiences with the company that you’re looking to hire. Reviews are a great way of knowing whether or not the workmanship that that plumbing company provides is exceptional.

Sump Pump float switches are design to rise with the rising water levels your basin and the pump is started after the water reaches a certain level.

Plumbing Repair Services

We connect you to the best Plumbing Emergency Firms in your city!
2436 Crescent Street
Germantown, MD 20874

Montgomery, Maryland (MD)

Telephone: 844-507-4350