#1 24X7 Plumbing and Heating Contractors Fort Washington 20749 MD (844-507-4350)

Posted by in Heating Contractors, on February 11, 2018

Plumbing Repair Services in Fort Washington 20749

24X7 Operation & FREE Consultation Click to Call

Plumbing and Heating Contractors Fort Washington 20749 MD: Got a broken water line? Here is how you can fix it

The water pipe does not give a warning before breaking. You only get to see the results after the deed is done. The sudden gush of water is the obvious indication of a broken water line. When a water line inside the home gets damaged, it is still easy to fix because it is visible. But in case the underground water line breaks, you need to dig deep into the ground and fix it. This means more hassle and expense. You can go through the tips given below to reduce the expenditure and learn how to fix broken water lines yourself.

Some common reasons for the breaking of water lines

Usually, fittings and connections in the water pipe are the first to get affected and develop cracks which leak and eventually erode the PVC pipe to such an extent that it breaks. The underground water lines located under the foundation of the home or between the street and the house break due to deterioration with the passage of time or due to pressure. In some cases, these pipes burst due to freezing. Water lines also break during earthquakes. When you hear a rumbling or hissing sound coming from the main water line even when you are not using any of the faucets, it means that the main water line has developed a crack. Also, when the pressure of water is lower than usual, it indicates the loss of water due to a leak in the pipe. In such cases, it is very important that you know how to fix broken water lines. Or call us today and we can help you find the best Plumbing Emergency Firms in Fort Washington 20749 MD.

Things that you need to keep in mind before repairing the pipe

It is important to evaluate the condition of the pipe before going for a repair. If the pipe is very old, it is better to replace it rather than trying to repair it. In case the pipe has been repaired before, then too replacement is a good choice. If the pipe has developed a crack for the first time, you should consider removing the whole pipe rather than replacing only the damaged part. The reason is that a repaired pipe is more likely to develop cracks again. So instead of spending money twice on repairing, it is wiser to spend it once and install a new pipe which will last longer. Pipe materials like PVC can be easily repaired but lead based pipes become brittle and corroded with time and hence, need to be replaced.

Plumbing and Heating Contractors Fort Washington 20749 MD

How to fix broken water lines?

Here are some tips which might prove to be useful in case you want to learn how to fix broken water lines.

  • Locating the point of the leak

The first thing is to find the crack. The cracks in the pipes located inside the house are evident but the underground pipes are not visible. When these pipes break, the accumulation of water above the ground or the wet mud gives an indication of the leak. If the pipe located behind the wall of the home breaks, you need to put your ear to the wall and locate the leak. When your pump is running and the water meter is moving without any of your faucets being on, it means there is a leak somewhere. That is why professionals and Plumbing Contractors Fort Washington 20749 MD keep an eye on that.

  • Digging under the ground

This advice is given by the top rated Plumbing Repair Services in Fort Washington 20749 MD. The pipes located underground can be repaired only after you dig them out. This is something which you cannot do yourself. You should find a reputable water main contractor to identify the problem and get it fixed. You also need to call your utility company to mark underground pipes and wires so that they do not get damaged when you dig for the water line. When the water line breaks outside the house, the pipe is dug out from the yard to the house. Then it is cut and removed and replaced with a new pipe. The new pipe should be connected with the existing one and all the indoor and outdoor joints should be sealed. You should always check for leaks after the repair work is over. There is also a no-dig repair method in which a resin pipe lining is put in to the pipe till the place of the break. It is then inflated with air so that it touches the wall of the pipe and hardens to seal the pipe. This is called the Cured in Place Pipe method. A minor break can be repaired by putting a sleeve around the pipe or by replacing only that small portion of the pipe.

Plumbing and Heating Contractors Fort Washington Maryland

  • Fixing the visible pipes yourself

When you see a sudden gush of water from any pipe of your house, you should first shut-off the main valve. A small leak can be closed by placing a piece of rubber or any other sealing agent available on the leak. You can then put a C-clamp on it to tighten the seal. A sleeve clamp can also be fixed using a screwdriver. It stops both small and large leaks. These plumbing repair items like hose clamps, duct tapes, rubber and C-clamps are very cheap and can be stored at home in anticipation of such problems. If you want to replace the pipe yourself, then you first need to identify which kind of pipe you have. Once that is done, you need to cut the pipe from the place where it has cracked. The next step is to attach a new pipe to the existing one with the help of fittings and clamps. Finally, the repaired pipe is connected to the faucet and it is ready to be used. Or you can give us a call and we will connect you to the best Plumbing Companies in Fort Washington 20749 MD.

If you follow some of these tips, you can save a lot of money and effort. You can fix the minor leaks yourself, but in case of major leaks or underground damage, it is better to take the help of a professional and licensed plumber. These are some of the things that you need to keep in mind when you are trying to repair a broken pipe line. Now you have all enough information to target the best Plumbing and Heating Contractors Fort Washington 20749 MD.

References

• http://www.instructables.com/id/Water-Line-Leaks-Fix-It-Yourself-Heres-How/

• http://www.oneprojectcloser.com/how-to-repair-underground-water-pipe/

Related Posts:

#1 24X7 Plumbing and Heating Contractors Madison 21648 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Mcdaniel 21647 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Kennedyville 21645 MD (844-507-4350)

Plumbing and Heating Contractors Fort Washington 20749 MD

Wrenches are essential in plumbing. A pair of medium sized slip joint pliers and an adjustable wrench should cover most jobs, along with various sized wrenches.

Plastic piping, unlike metal, won’t corrode.

Replacement: Your plumbing at home surely eats a little share of your salary. If you have noticed any part of your plumbing that has been asking for regular repairs, then it is high time that you consider replacing it. Invest wisely. It’s way better to spend money and have a well functioning fixture than paying recurring fees for repairs. You check your faucets, showerheads, water-heater and taps. If you have applied for a maintenance contract, then don’t hesitate to ask the plumber any possible replacement needed.

Salt and Baking Soda: Mix 1/2 cup of table salt with 1/2 cup of baking soda and pour down the blocked drain. Leave it for 10-20 minutes, then pour boiling water down. The salt, baking soda, and boiling water will produce a chemical reaction that should dissolve some of the nastiest blockages. (See also: 27 Uses for Baking Soda)

Heavy duty paper towels or rags will help clean up water from small leaks.

Save Money on Bathroom Modelling – Tap your contractor’s sources. When it comes to things like flooring, ask your subcontractor if he has odds–and–ends stock left over from other jobs. While renovating a Civil War–era bed-and-breakfast in New Jersey some years back, contractor Bill Asdal needed wood flooring. He made a few phone calls and came up with hundreds of square feet of hardwood, in various lengths and widths, that otherwise would have gone into the trash on other job sites. Just by planing it to uniform thickness, then sanding and refinishing it, he saved his client almost $9,000 in materials costs.

Tips for maintaining plumbing during winter: Install pipe insulation- To prevent the water pipes from getting frozen in the cold weather, you should provide adequate padding to the pipes from outside to keep them warm. This padding can be in the form of foam sleeves or insulating tape. If some parts of the pipe are still exposed, you should make use of heaters and lamps in the room to keep them warm. Insulation can save a lot of time and effort that is generally spent on thawing a pipe. Insulation is very important for the basement and attic pipes because these places are prone to cold temperatures.

When cold weather strikes, go into action. Open the cabinets beneath sinks and bathroom fixtures; warmer household air will help prevent the pipes inside from freezing. Opening taps to a bare trickle keeps water flowing and avoids a frozen blockage.

Tips for maintaining plumbing during winter: Prevent the clogging of drains- It is very important to keep the drain pipes free from clogging because a clogged drain does not allow water to pass through quickly. If your drain pipe is blocked, you should immediately clean it because the water which does not get drained due to pipe clogging can get accumulated and freeze into a block of ice in winter. This can create a tremendous pressure on the inside of the pipe which can lead to cracks. These cracks can widen and cause the pipe to burst in the future. So it is important to unclog the pipes regularly.

Don’t Toss Money Down the Toilet — Update It. Here’s some potty talk you won’t want to miss: When remodeling your bathroom, consider replacing your toilet seat and lid instead of tossing out the whole porcelain perch. Just changing out these two tops can give your toilet a fresh look without buying a new unit, which saves you plumber installation fees, too.

A multi-bit screwdriver can reduce the number of tools that need to be carried around on the job.

Act quickly to stop a leak: A gushing plumbing leak can dump several gallons per minute into your home. You have to act fast to stop the stream. Shutting off the main water valve is an obvious move. But there may still be a few gallons of water held in pipes above the leak. Turn on the lowest faucet in the house, which will let the water harmlessly drain out of the faucet instead of through the leaking pipe.

To stop an over flowing toilet locate the valve behind your toilet and turn it off immediately

Don’t overload your garbage disposal with too much food at one time

Save Money on Bathroom Modelling – Wait until contractors want your business. Don’t schedule your reno in the height of summer or between September, when the kids go back to school, and Christmas. “That’s premium time,” explains Lisa Stacholy, owner of LKS Architects, in Atlanta, Georgia. Suppliers tend to be busier, labor scarcer, and deliveries slower. One Virginia–based contractor offers discounts of between 4.5 and 5.5 percent (depending on the overall budget) on projects during his down time, right after the new year.

Use sealant on all gaps and joints.

Ways to Unclog Drains: Buy a snake pipe to pull out the obstacle- This is a cleaning equipment which is very effective. It has to be used manually to bring out the things which are obstructing the drainage system. The snake pipe has a flexible metal spiral string at one end which can be pulled out and extended to slide into the pipe like a snake and after reaching the point of the clog; it can dislodge it and pull it out. The snake pipe should be used after opening the drain pipe from below. This can effectively remove the obstacle in a short time.

Plumbing Repair Services

We connect you to the best Plumbing Emergency Firms in your city!
7399 Washington Avenue
Fort Washington, MD 20749

Prince Georges, Maryland (MD)

Telephone: 844-507-4350