#1 24X7 Plumbing and Heating Contractors Capitol Heights 20799 MD (844-507-4350)

Posted by in Heating Contractors, on November 19, 2017

Plumbing Repair Services in Capitol Heights 20799

24X7 Operation & FREE Consultation Click to Call

Plumbing and Heating Contractors Capitol Heights 20799 MD: Got a broken water line? Here is how you can fix it

The water pipe does not give a warning before breaking. You only get to see the results after the deed is done. The sudden gush of water is the obvious indication of a broken water line. When a water line inside the home gets damaged, it is still easy to fix because it is visible. But in case the underground water line breaks, you need to dig deep into the ground and fix it. This means more hassle and expense. You can go through the tips given below to reduce the expenditure and learn how to fix broken water lines yourself.

Some common reasons for the breaking of water lines

Usually, fittings and connections in the water pipe are the first to get affected and develop cracks which leak and eventually erode the PVC pipe to such an extent that it breaks. The underground water lines located under the foundation of the home or between the street and the house break due to deterioration with the passage of time or due to pressure. In some cases, these pipes burst due to freezing. Water lines also break during earthquakes. When you hear a rumbling or hissing sound coming from the main water line even when you are not using any of the faucets, it means that the main water line has developed a crack. Also, when the pressure of water is lower than usual, it indicates the loss of water due to a leak in the pipe. In such cases, it is very important that you know how to fix broken water lines. Or call us today and we can help you find the best Plumbing Emergency Firms in Capitol Heights 20799 MD.

Things that you need to keep in mind before repairing the pipe

It is important to evaluate the condition of the pipe before going for a repair. If the pipe is very old, it is better to replace it rather than trying to repair it. In case the pipe has been repaired before, then too replacement is a good choice. If the pipe has developed a crack for the first time, you should consider removing the whole pipe rather than replacing only the damaged part. The reason is that a repaired pipe is more likely to develop cracks again. So instead of spending money twice on repairing, it is wiser to spend it once and install a new pipe which will last longer. Pipe materials like PVC can be easily repaired but lead based pipes become brittle and corroded with time and hence, need to be replaced.

Plumbing and Heating Contractors Capitol Heights 20799 MD

How to fix broken water lines?

Here are some tips which might prove to be useful in case you want to learn how to fix broken water lines.

  • Locating the point of the leak

The first thing is to find the crack. The cracks in the pipes located inside the house are evident but the underground pipes are not visible. When these pipes break, the accumulation of water above the ground or the wet mud gives an indication of the leak. If the pipe located behind the wall of the home breaks, you need to put your ear to the wall and locate the leak. When your pump is running and the water meter is moving without any of your faucets being on, it means there is a leak somewhere. That is why professionals and Plumbing Contractors Capitol Heights 20799 MD keep an eye on that.

  • Digging under the ground

This advice is given by the top rated Plumbing Repair Services in Capitol Heights 20799 MD. The pipes located underground can be repaired only after you dig them out. This is something which you cannot do yourself. You should find a reputable water main contractor to identify the problem and get it fixed. You also need to call your utility company to mark underground pipes and wires so that they do not get damaged when you dig for the water line. When the water line breaks outside the house, the pipe is dug out from the yard to the house. Then it is cut and removed and replaced with a new pipe. The new pipe should be connected with the existing one and all the indoor and outdoor joints should be sealed. You should always check for leaks after the repair work is over. There is also a no-dig repair method in which a resin pipe lining is put in to the pipe till the place of the break. It is then inflated with air so that it touches the wall of the pipe and hardens to seal the pipe. This is called the Cured in Place Pipe method. A minor break can be repaired by putting a sleeve around the pipe or by replacing only that small portion of the pipe.

Plumbing and Heating Contractors Capitol Heights Maryland

  • Fixing the visible pipes yourself

When you see a sudden gush of water from any pipe of your house, you should first shut-off the main valve. A small leak can be closed by placing a piece of rubber or any other sealing agent available on the leak. You can then put a C-clamp on it to tighten the seal. A sleeve clamp can also be fixed using a screwdriver. It stops both small and large leaks. These plumbing repair items like hose clamps, duct tapes, rubber and C-clamps are very cheap and can be stored at home in anticipation of such problems. If you want to replace the pipe yourself, then you first need to identify which kind of pipe you have. Once that is done, you need to cut the pipe from the place where it has cracked. The next step is to attach a new pipe to the existing one with the help of fittings and clamps. Finally, the repaired pipe is connected to the faucet and it is ready to be used. Or you can give us a call and we will connect you to the best Plumbing Companies in Capitol Heights 20799 MD.

If you follow some of these tips, you can save a lot of money and effort. You can fix the minor leaks yourself, but in case of major leaks or underground damage, it is better to take the help of a professional and licensed plumber. These are some of the things that you need to keep in mind when you are trying to repair a broken pipe line. Now you have all enough information to target the best Plumbing and Heating Contractors Capitol Heights 20799 MD.

References

• http://www.instructables.com/id/Water-Line-Leaks-Fix-It-Yourself-Heres-How/

• http://www.oneprojectcloser.com/how-to-repair-underground-water-pipe/

Related Posts:

#1 24X7 Plumbing and Heating Contractors Lusby 20657 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Mechanicsville 20659 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Marbury 20658 MD (844-507-4350)

Plumbing and Heating Contractors Capitol Heights 20799 MD

If your drain is clogged you can pour half a box of baking soda and ½ a cup of vinegar down a the drain, then wait 30-45 minutes and pour boiling water down the drain.

Pouring chemicals down your drain will corrode the pipes.

Tips for maintaining your bathroom plumbing: Know the location of the main water valve- You should be aware of the location of the main valve of the water supply to your home. The reason is that if a big leak suddenly causes your house to get flooded with water, you should be able to stop the water supply at once so as to minimize the water damage and halt the wastage of water. The main valve is usually located outside the house beside the water meter. You should turn it off as soon as possible during an emergency.

If you cannot thaw your pipes, don’t force it. Instead, call a licensed plumber.

Use paint with mildewcide in damp areas: Mildewcide in paint is usually effective for controlling surface mold in damp rooms like bathrooms and outside in shady areas. Many paints already have mildewcide in them. Check with your paint dealer to be sure.

Consider “smart” bathroom timers and humidity sensors: Bath fan timers are important because excess humidity can cause everything from window condensation and mildew to moisture and rot inside walls. Some new wall switch timers have dual controls for turning off both lights and fans after a preset time. For the ultimate in smart bath fan timers, buy a humidity-sensing fan designed to automatically turn on and off as moisture levels at the ceiling rise and fall.

Searching quality within cheap prices: Don’t get fooled by the cheap offers or other marketing strategies by some professional plumbing companies. Remember, quality has its price, therefore, do not compromise your safety. And always ask for proof in the form of licenses/certifications as a good company always satisfies its customers through trust building.

Tips for installing and repairing a gas line: You need to buy the right pipes and fittings- This is the first step in installing a new gas line. There are so many sizes available but you need to choose the one which can fit into the gas meter. Most of the domestic gas lines make use of 1.5 inch pipes whereas the commercial gas lines require upto 8 inch long pipes. You should always go for a pipe which is longer than your requirement so that it can come in handy in case there is an overlap. It is important to buy the right size and length of pipe so that money spent on it does not get wasted.

Although most water heaters last 10-15 years, it’s best to start shopping for a new one if yours is more than 7 years old.

Tips for repairing burst pipes: Check the source of the leak- If a pipe located behind a wall or in the ceiling bursts, you need to pin point the exact location of the leak to stop it. For this purpose, you need to drill a small hole into the drywall and allow the excess water to drain off. Then you can check the area which looks very damp. That is the source of the leak. Once the source is located, you can get the drywall removed from that area and ask a plumber to fix the leak. Drywall is not very expensive to replace so you should take a chance and try this method to solve the pipe bursting problem.

Understand standard bathroom dimensions. Knowing a few key measurements, like the size of a typical bathtub and how much space is needed for a toilet, will help you plan your remodel more efficiently.

Disconnect outside water hoses. This also prevents frozen pipes.

Replace water supply hoses – Over time, water supply hoses can become brittle and burst. Check them periodically and replace your old hoses with the newer types that consist of flexible plastic tubing encased in a stainless steel braided exterior. Better still, upgrade to the new auto-shutoff connector hoses that protect against catastrophic water damage by automatically shutting off the water supply to the washing machine if excess water flow is sensed. These ingenious hoses cost only about $20 each and can be used on washing machines, dishwashers and other plumbing fixtures and appliances.

Boiling Water: Tips don’t get any easier than this. Put the kettle on (or use the stove or microwave if you don’t own a kettle) and boil up as much water as it will hold. Now pour it slowly down the drain in two to three stages, allowing the hot water to work for a several seconds in between each pour. This is usually the easiest and quickest way to unclog a drain. If there’s any water left, congratulate yourself with a cup of tea.

Perform a pipe inspection to check for leaks. You may have to look into some hard to see places such as under the home so make sure you use a flashlight. If you find a water leak in a pipe, you will have to get it repaired or replaced. You will have to shut off the main water valve so it can be repaired. It is wise to hire a plumber to do the job.

If pipes do freeze, don’t panic. First, shut off the water supply to the house, then open a faucet near the blocked area to vent vapors from the frozen water. If you suspect that pipes in the hot water system are frozen, turn off the hot water heater. Use a hair dryer to warm the frozen pipe (never use an open flame to thaw a pipe), starting at the end of the pipe nearest to the tap. (Don’t use a hair dryer in areas of standing water.) You’ll know the pipe has begun to thaw when water begins to trickle from the open faucet. When the flow is restored, check the plumbing carefully for cracks or leaks.

You can use half a lemon to rub away any hard water stains on yourfaucets.

Disconnect hoses: Standing water in a hose may freeze back into the pipe and create an ice block that, in a best-case scenario, stops your water flow. In the worst cases, it may bust your pipes and create damage to walls, floor and foundation.

A pedestal sump pump has the motor attached to the top of a shaft, this motor is not designed to be under water.

For electric water heaters, install a timer that can automatically turn the hot water off at night and on in the morning. A simple timer can pay for itself in less than a year.

If a supply tube break off is causing a leak, screw in a blind cap to seal off the leak until it can be fixed.

A pedestal sump pump works well if you have a smaller diameter basins

Prevent frozen pipes before they start. Best defense: insulation. Insulate exposed pipes in a crawl space or in the garage with easy-to-install plastic insulation. It’s a peel-and-stick solution. Before winter comes, remove exterior hoses, and apply insulating caps to outdoor fixtures, as a frozen exterior spigot can damage interior pipes. Households with automatic sprinkler systems can clear standing water with compressed air.

If you are going to anchor a pipe make sure to leave room for expansion.

Plumbing Repair Services

We connect you to the best Plumbing Emergency Firms in your city!
8444 2nd Street
Capitol Heights, MD 20799

Prince Georges, Maryland (MD)

Telephone: 844-507-4350