#1 24X7 Plumbing and Heating Contractors Bowie 20720 MD (844-456-4168)

Posted by in Heating Contractors, on September 24, 2017

Plumbing Repair Services in Bowie 20720

24X7 Operation & FREE Consultation Click to Call

Plumbing and Heating Contractors Bowie 20720 MD: Got a broken water line? Here is how you can fix it

The water pipe does not give a warning before breaking. You only get to see the results after the deed is done. The sudden gush of water is the obvious indication of a broken water line. When a water line inside the home gets damaged, it is still easy to fix because it is visible. But in case the underground water line breaks, you need to dig deep into the ground and fix it. This means more hassle and expense. You can go through the tips given below to reduce the expenditure and learn how to fix broken water lines yourself.

Some common reasons for the breaking of water lines

Usually, fittings and connections in the water pipe are the first to get affected and develop cracks which leak and eventually erode the PVC pipe to such an extent that it breaks. The underground water lines located under the foundation of the home or between the street and the house break due to deterioration with the passage of time or due to pressure. In some cases, these pipes burst due to freezing. Water lines also break during earthquakes. When you hear a rumbling or hissing sound coming from the main water line even when you are not using any of the faucets, it means that the main water line has developed a crack. Also, when the pressure of water is lower than usual, it indicates the loss of water due to a leak in the pipe. In such cases, it is very important that you know how to fix broken water lines. Or call us today and we can help you find the best Plumbing Emergency Firms in Bowie 20720 MD.

Things that you need to keep in mind before repairing the pipe

It is important to evaluate the condition of the pipe before going for a repair. If the pipe is very old, it is better to replace it rather than trying to repair it. In case the pipe has been repaired before, then too replacement is a good choice. If the pipe has developed a crack for the first time, you should consider removing the whole pipe rather than replacing only the damaged part. The reason is that a repaired pipe is more likely to develop cracks again. So instead of spending money twice on repairing, it is wiser to spend it once and install a new pipe which will last longer. Pipe materials like PVC can be easily repaired but lead based pipes become brittle and corroded with time and hence, need to be replaced.

Plumbing and Heating Contractors Bowie 20720 MD

How to fix broken water lines?

Here are some tips which might prove to be useful in case you want to learn how to fix broken water lines.

  • Locating the point of the leak

The first thing is to find the crack. The cracks in the pipes located inside the house are evident but the underground pipes are not visible. When these pipes break, the accumulation of water above the ground or the wet mud gives an indication of the leak. If the pipe located behind the wall of the home breaks, you need to put your ear to the wall and locate the leak. When your pump is running and the water meter is moving without any of your faucets being on, it means there is a leak somewhere. That is why professionals and Plumbing Contractors Bowie 20720 MD keep an eye on that.

  • Digging under the ground

This advice is given by the top rated Plumbing Repair Services in Bowie 20720 MD. The pipes located underground can be repaired only after you dig them out. This is something which you cannot do yourself. You should find a reputable water main contractor to identify the problem and get it fixed. You also need to call your utility company to mark underground pipes and wires so that they do not get damaged when you dig for the water line. When the water line breaks outside the house, the pipe is dug out from the yard to the house. Then it is cut and removed and replaced with a new pipe. The new pipe should be connected with the existing one and all the indoor and outdoor joints should be sealed. You should always check for leaks after the repair work is over. There is also a no-dig repair method in which a resin pipe lining is put in to the pipe till the place of the break. It is then inflated with air so that it touches the wall of the pipe and hardens to seal the pipe. This is called the Cured in Place Pipe method. A minor break can be repaired by putting a sleeve around the pipe or by replacing only that small portion of the pipe.

Plumbing and Heating Contractors Bowie Maryland

  • Fixing the visible pipes yourself

When you see a sudden gush of water from any pipe of your house, you should first shut-off the main valve. A small leak can be closed by placing a piece of rubber or any other sealing agent available on the leak. You can then put a C-clamp on it to tighten the seal. A sleeve clamp can also be fixed using a screwdriver. It stops both small and large leaks. These plumbing repair items like hose clamps, duct tapes, rubber and C-clamps are very cheap and can be stored at home in anticipation of such problems. If you want to replace the pipe yourself, then you first need to identify which kind of pipe you have. Once that is done, you need to cut the pipe from the place where it has cracked. The next step is to attach a new pipe to the existing one with the help of fittings and clamps. Finally, the repaired pipe is connected to the faucet and it is ready to be used. Or you can give us a call and we will connect you to the best Plumbing Companies in Bowie 20720 MD.

If you follow some of these tips, you can save a lot of money and effort. You can fix the minor leaks yourself, but in case of major leaks or underground damage, it is better to take the help of a professional and licensed plumber. These are some of the things that you need to keep in mind when you are trying to repair a broken pipe line. Now you have all enough information to target the best Plumbing and Heating Contractors Bowie 20720 MD.

References

• http://www.instructables.com/id/Water-Line-Leaks-Fix-It-Yourself-Heres-How/

• http://www.oneprojectcloser.com/how-to-repair-underground-water-pipe/

Related Posts:

#1 24X7 Plumbing and Heating Contractors Betterton 21610 MD (844-456-4168)
#1 24X7 Plumbing and Heating Contractors Barclay 21607 MD (844-456-4168)
#1 24X7 Plumbing and Heating Contractors Bethlehem 21609 MD (844-456-4168)

Plumbing and Heating Contractors Bowie 20720 MD

Wrenches are essential in plumbing. A pair of medium sized slip joint pliers and an adjustable wrench should cover most jobs, along with various sized wrenches.

To maintain a sump pump, periodically check the system.

When installing a sump pump, it is usually recommended that a check valve be installed, this prevents water left in the outlet pipe from flowing back into the basin

How to deal with water damage? Facilitate the drying process- When there is water damage, it can take a long time to dry up. In order to accelerate this process, you should remove the wall board that is in touch with water. Drywall can absorb a lot of moisture, so it needs to be replaced. Opening the doors and windows and letting in air can quicken the process of drying. All wet items need to be removed, especially wet carpets. Wet-dry vacuum can help in removing the standing water. It can easily suck up the excess water and clear the surface of the flooring. Then the floor can be wiped to remove any leftover moisture content.

Find out when it leaks: If the leak starts during the spin cycle on your machine, it could be a leaky drain hose. Locate the drain hose and make sure the connections are all tight. You may have to purchase a new drain hose if the existing one is damaged. This is an easy DIY fix.

It is a wise idea to install flood alarms, which is a device that will alert you in case it comes in contact with water. This device is made to notify you of an impending flooding or serious leak problems.

Check the water inlet valve: Locate the water inlet valve and check to see if there is a leaky connection. It may be as simple as tightening the connection to prevent further leaking.

Salt and Baking Soda: Mix 1/2 cup of table salt with 1/2 cup of baking soda and pour down the blocked drain. Leave it for 10-20 minutes, then pour boiling water down. The salt, baking soda, and boiling water will produce a chemical reaction that should dissolve some of the nastiest blockages. (See also: 27 Uses for Baking Soda)

Tips for maintaining your bathroom plumbing: Know the location of the main water valve- You should be aware of the location of the main valve of the water supply to your home. The reason is that if a big leak suddenly causes your house to get flooded with water, you should be able to stop the water supply at once so as to minimize the water damage and halt the wastage of water. The main valve is usually located outside the house beside the water meter. You should turn it off as soon as possible during an emergency.

Water Trickling Into the Bowl, or “Phantom Flushes: You may periodically hear your toilet begin to spontaneously refill, as though someone had flushed it. A toilet that cuts on and off by itself, or runs intermittently, has a problem that plumbers call a phantom flush. The cause is a very slow leak from the tank into the bowl. This problem is almost certainly caused by a bad flapper or flapper seat. The solution is to drain the tank and bowl, check and clean the flapper seat, and replace the flapper if it’s worn or damaged.

Prevent frozen pipes before they start. Best defense: insulation. Insulate exposed pipes in a crawl space or in the garage with easy-to-install plastic insulation. It’s a peel-and-stick solution. Before winter comes, remove exterior hoses, and apply insulating caps to outdoor fixtures, as a frozen exterior spigot can damage interior pipes. Households with automatic sprinkler systems can clear standing water with compressed air.

Ways to Prevent Washing Machine Leaks: Change the water shut-off system- It is better to replace the standard double valve for hot and cold water supply with a single shut-off valve so that in case there is a leak, you can immediately shut off the single main valve and stop the water supply to the machine completely. It is a convenient method to prevent further leaking or bursting of the pipes. It is very handy because you have to remember to flip only one lever on your way out.

Clean-outs: You should also find out where the clean-outs are. This is really important.

Tips for repairing burst pipes: Make use of pipe clamps- In case there are no plumbers available when your pipe bursts, you can repair the pipe yourself with the help of clamps. There are various types of clamps available for different leaks. The pipe clamps come with hinges so that you can simply fix the clamp over the leak and tighten it with the help of screws. These clamps work very well during emergencies and are available every where at a low cost. They stop all kinds of leaks immediately and can act as permanent solutions too in case the leak is not very huge.

Getting your boiler and central heating system serviced and checked in summer is often ideal as you can do it in your own time, as opposed to expensive emergency call outs over the winter. And once it’s done, you can rest easy in the sun, knowing that when the colder months arrive you’ll be tucked up in the warm.

A pedestal sump pump works well if you have a smaller diameter basins

Save Money on Bathroom Modelling – Bring in natural light without adding windows. Before cutting a big hole in the side of your house and rearranging the framing, consider less invasive—and less expensive—ways of capturing light. To brighten up a windowless bath or hallway, for instance, you can install a “light tube,” which slips between roof rafters and funnels sunshine down into the living space.

Make sure the machine is balanced: It may sound hard to believe, but something as simple as your machine being tilted can cause water to leak. If you’ve recently installed or moved your machine, make sure it is completely level. Even the slightest tilt can cause water to leak from the front of the machine.

Bathroom Remodelling Tips – Establish a realistic bathroom remodelling budget. At this time you will also need to determine how you will finance your bathroom remodel. Do you have a savings that you can dip into or will you need get a loan? The answer to this will be a factor in determining your budget. Will this be a larger remodel or are you making minor changes? When establishing your budget keep in mind the design ideas you would like and whether they fall on the pricier side. Also, it will always be less expensive if you don’t need to relocate plumbing fixtures, such as toilets or sinks, so if you are on a smaller budget it is more economical to incorporate your current bathroom layout into the new design.

Although most water heaters last 10-15 years, it’s best to start shopping for a new one if yours is more than 7 years old.

To determine the size of sump pump you need, you must know how much water you’ll need to be pumped, how high the water will be pumped and the length and size of pipe.

Always test your plumbing for leaks before finalizing anything.

Save Money on Bathroom Modelling – Make decisions early. Start prowling the aisles at the hardware store or home center way before the wrecking crew shows up. Get a good feeling for what you want in fixtures and appliances and what they cost. If you aren’t absolutely specific up front about what you want, you’ll have to rely on your contractor’s estimate, called an allowance, and his notion of what is acceptable may be quite different from yours. “Ninety–eight percent of the time, allowances are too low,” says Tom Silva. For instance, you may have had a glass–tile backsplash in mind, but your contractor’s bid was for ceramic.

Plumbing Repair Services

We connect you to the best Plumbing Emergency Firms in your city!
1835 Linden Avenue
Bowie, MD 20720

Prince Georges, Maryland (MD)

Telephone: 844-456-4168