#1 24X7 Plumbing and Heating Contractors Bladensburg 20710 MD (844-507-4350)

Posted by in Heating Contractors, on January 30, 2018

Plumbing Repair Services in Bladensburg 20710

24X7 Operation & FREE Consultation Click to Call

Plumbing and Heating Contractors Bladensburg 20710 MD: Got a broken water line? Here is how you can fix it

The water pipe does not give a warning before breaking. You only get to see the results after the deed is done. The sudden gush of water is the obvious indication of a broken water line. When a water line inside the home gets damaged, it is still easy to fix because it is visible. But in case the underground water line breaks, you need to dig deep into the ground and fix it. This means more hassle and expense. You can go through the tips given below to reduce the expenditure and learn how to fix broken water lines yourself.

Some common reasons for the breaking of water lines

Usually, fittings and connections in the water pipe are the first to get affected and develop cracks which leak and eventually erode the PVC pipe to such an extent that it breaks. The underground water lines located under the foundation of the home or between the street and the house break due to deterioration with the passage of time or due to pressure. In some cases, these pipes burst due to freezing. Water lines also break during earthquakes. When you hear a rumbling or hissing sound coming from the main water line even when you are not using any of the faucets, it means that the main water line has developed a crack. Also, when the pressure of water is lower than usual, it indicates the loss of water due to a leak in the pipe. In such cases, it is very important that you know how to fix broken water lines. Or call us today and we can help you find the best Plumbing Emergency Firms in Bladensburg 20710 MD.

Things that you need to keep in mind before repairing the pipe

It is important to evaluate the condition of the pipe before going for a repair. If the pipe is very old, it is better to replace it rather than trying to repair it. In case the pipe has been repaired before, then too replacement is a good choice. If the pipe has developed a crack for the first time, you should consider removing the whole pipe rather than replacing only the damaged part. The reason is that a repaired pipe is more likely to develop cracks again. So instead of spending money twice on repairing, it is wiser to spend it once and install a new pipe which will last longer. Pipe materials like PVC can be easily repaired but lead based pipes become brittle and corroded with time and hence, need to be replaced.

Plumbing and Heating Contractors Bladensburg 20710 MD

How to fix broken water lines?

Here are some tips which might prove to be useful in case you want to learn how to fix broken water lines.

  • Locating the point of the leak

The first thing is to find the crack. The cracks in the pipes located inside the house are evident but the underground pipes are not visible. When these pipes break, the accumulation of water above the ground or the wet mud gives an indication of the leak. If the pipe located behind the wall of the home breaks, you need to put your ear to the wall and locate the leak. When your pump is running and the water meter is moving without any of your faucets being on, it means there is a leak somewhere. That is why professionals and Plumbing Contractors Bladensburg 20710 MD keep an eye on that.

  • Digging under the ground

This advice is given by the top rated Plumbing Repair Services in Bladensburg 20710 MD. The pipes located underground can be repaired only after you dig them out. This is something which you cannot do yourself. You should find a reputable water main contractor to identify the problem and get it fixed. You also need to call your utility company to mark underground pipes and wires so that they do not get damaged when you dig for the water line. When the water line breaks outside the house, the pipe is dug out from the yard to the house. Then it is cut and removed and replaced with a new pipe. The new pipe should be connected with the existing one and all the indoor and outdoor joints should be sealed. You should always check for leaks after the repair work is over. There is also a no-dig repair method in which a resin pipe lining is put in to the pipe till the place of the break. It is then inflated with air so that it touches the wall of the pipe and hardens to seal the pipe. This is called the Cured in Place Pipe method. A minor break can be repaired by putting a sleeve around the pipe or by replacing only that small portion of the pipe.

Plumbing and Heating Contractors Bladensburg Maryland

  • Fixing the visible pipes yourself

When you see a sudden gush of water from any pipe of your house, you should first shut-off the main valve. A small leak can be closed by placing a piece of rubber or any other sealing agent available on the leak. You can then put a C-clamp on it to tighten the seal. A sleeve clamp can also be fixed using a screwdriver. It stops both small and large leaks. These plumbing repair items like hose clamps, duct tapes, rubber and C-clamps are very cheap and can be stored at home in anticipation of such problems. If you want to replace the pipe yourself, then you first need to identify which kind of pipe you have. Once that is done, you need to cut the pipe from the place where it has cracked. The next step is to attach a new pipe to the existing one with the help of fittings and clamps. Finally, the repaired pipe is connected to the faucet and it is ready to be used. Or you can give us a call and we will connect you to the best Plumbing Companies in Bladensburg 20710 MD.

If you follow some of these tips, you can save a lot of money and effort. You can fix the minor leaks yourself, but in case of major leaks or underground damage, it is better to take the help of a professional and licensed plumber. These are some of the things that you need to keep in mind when you are trying to repair a broken pipe line. Now you have all enough information to target the best Plumbing and Heating Contractors Bladensburg 20710 MD.

References

• http://www.instructables.com/id/Water-Line-Leaks-Fix-It-Yourself-Heres-How/

• http://www.oneprojectcloser.com/how-to-repair-underground-water-pipe/

Related Posts:

#1 24X7 Plumbing and Heating Contractors Point Of Rocks 21777 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors New Windsor 21776 MD (844-507-4350)
#1 24X7 Plumbing and Heating Contractors Rocky Ridge 21778 MD (844-507-4350)

Plumbing and Heating Contractors Bladensburg 20710 MD

Tips for Fixing Low Water Pressure in Your Home: Locate the water pressure regulator- Many times a water pressure regulator is attached to the main supply valve. It is a wheel-like structure which can either decrease or increase the supply pressure. You can check whether your main supply valve has a regulator or not. If it is there, you can simply adjust it to increase the pressure of the flow of water to your house. It is better to leave this job to a plumber because the regulator is very tight and needs specific tools in order to make adjustments. The plumber also knows how much pressure your pipes can bear so he can make changes accordingly.

Ways in Which You Can Prevent Water Damage: Check your roof for leaks- The roof is the most vulnerable part of your house because it is exposed to the harsh rays of the sun as well as heavy downpour. Such an onslaught can damage the shingles of your roof. This can cause water leaks which can spoil the interiors of your house. You need to check your roof at least once in a year to see whether there are any missing or broken shingles. In case there are a few such shingles, you should immediately get them repaired or replaced. Sometimes the caulking can also get cracked. This too requires repairing.

Tape is only meant for pipe threads, don’t use tape on compressors or other connections

A multi-bit screwdriver can reduce the number of tools that need to be carried around on the job.

Ways to choose your plumber – Warranty – All plumbers should guarantee their work, including the parts. Many warranties cover the plumber’s work for up to one year. If the plumber refuses to guarantee his or her work, move on.

Ways in Which You Can Prevent Water Damage: Check the bathroom flooring- Washrooms contain the maximum water supply pipes in the house. These pipes are more prone to damage because of regular use. If they start leaking, they can make the floor damp. Soft spots created by this dampness are generally seen around toilets, sinks, tubs and showers. You should immediately call the plumber to fix the leak to prevent the dampness from spreading to other parts of the bathroom or the house.

Learn How to Do It Yourself: You shouldn’t attempt to solve all plumbing problems on your own, but there are some things that you should be prepared to do yourself. Knowing how to use a sewer snake, and learning the fine art of unclogging a drain are two cheap plumbing maintenance tips that will save you money in repairs.

Know where to go when trouble happens. Should plumbing fail, will you know how to stop the flood? Locate the main shut-off valve for the home water supply. If it’s in a dark, hidden, or hard-to-reach place, gather any tools you’ll need for a quick shut-off, and store them nearby. There’s nothing like the frustration of a missing flashlight or a misplaced shut-off key when water’s pouring down the stairs from a broken pipe.

Disconnect hoses: Standing water in a hose may freeze back into the pipe and create an ice block that, in a best-case scenario, stops your water flow. In the worst cases, it may bust your pipes and create damage to walls, floor and foundation.

Make a Checklist: To maximize your plumber’s time, it would be best to check all possible troubles in your plumbing. Remembering another plumbing trouble after the plumber leaves can be very costly. You will ask for another price quote and set for another appointment. With everything laid out properly, not only will you be able to save money but time as well.

How to deal with water damage? Locate a leak and stop it immediately- A small leak can lead to a big crack in the pipe and cause a gushing flow of water to damage your house. If a pipe in your house breaks and floods your house with gallons of water, you need to find the source of the leak and stop the flow of water quickly. For this purpose, you need to shut of the main valve of the water supply pipe of your house. However, even after shutting off the main valve, there can be a lot of water stored in the small water pipes. To drain out this excess water, you should turn on the lowest faucet slowly. This can prevent any further water flow through the leaking pipe.

Insulate your gas or oil hot-water storage tank and pipes, but be careful not to cover the water heater’s top, bottom, thermostat or burner compartment; when in doubt, get professional help.

Distilled vinegar can remove hard water stains on your shower head. Just tie a bag of vinegar around your shower head and leave it there for a few hours. Then you can simply wipe away the stains with a cloth.

If your water pressure is too high, like over 80 pounds per square inch for example, it can cause damage to your faucet and create a leak

Bathroom Remodelling Tips – Consider popular bathroom design trends. Second sinks have become very popular in bathroom remodels as they allow two people to use the bathroom at the same time. Another popular trend in bathroom design is separating the toilet from the rest of the bathroom. If you only have a shower, consider replacing this with a bathtub which can serve double duty as both a bath and a shower. Whirlpool bathtubs have also become very popular in today’s bathrooms. Nearly everyone elects to include a bathroom exhaust fan, often incorporating a heater on a timer, as well.

Plumbing Repair Services

We connect you to the best Plumbing Emergency Firms in your city!
6247 Lake Street
Bladensburg, MD 20710

Prince Georges, Maryland (MD)

Telephone: 844-507-4350